👋
thank you for choosing my video, see you soon for new videos ...😊
If you have any doubts on how to carry out these procedures, please do. write me on messages thanks
======================================
these procedures were used in this project is.
first procedure to do is to punch the nails. and first procedure mashin hummel disc 24 ore disc 36.) then proceed with number 50. and finally use the disc 100. then also with the corners spread the Edger disc 24 ore disc 36). then 50 and at the end use the Festool disc 80 for the corners. and the last procedure uses hand sand with paper -120 or paper -150
=======================================
grazie di aver scelto il mio video ci si vede a breve per novi video 👋👷♂️😊
se avete qualche dubbio come fare realizare queste procedure da fare. scrivetemi su gli messaggi grazie
subscriber 🙏🙏🙏🙏🙏🙏🙏🙏🙏
8 сен 2024