No video :(

SANDING Deck- Went Way FASTER then I thought!! (Deck Project Part2)

Подписаться 249

Просмотров 76 тыс.

50% 1

Part 2 on redoing the deck, Sanding the deck to a amazing results
Thank you for all the support!!
----------------------------------------------------------------------------------------------------------------------------------
Novice wood working and making video and vlogs for your entertainment.
I have a good time making and trying new things.
I thank you for watching this content and I hope you enjoy,
If you like please subscribe and give a like, it helps me understand what you like and helps me make more content for you.
Thank you again.
Wood treatments:
Walrus oil:
walrusoil.com/products/cuttin...
Acks wood past:
ackswoodpaste.com/

Опубликовано:

9 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@millsmillwork5910 2 года назад

Well now that we have found every pro out there. This thing works, just be carful.

@ljones98391 3 года назад

Thank you so much for showing this. I appreciate that you talked about types of deck wood, age and size of your decks, number of sanding refills used, etc. All the details were very helpful including that the sander is very heavy. This part of your job turned out very well.

@millsmillwork5910 3 года назад

Thank you very much!

@rickwillson2811 3 года назад

Pressure wash before sanding (takes away the mildew... Sand paper is more effective) ...Use 24 grit (I've used as low as 16). Seal with TWP 1500 series. My company has restored over 3,000 decks in the last 30 years....

@Nickdalman Год назад

Can you please share your whole process? When removing old paint do you run the drum sanding with the grain? Or on an angle? And what grit? There is so little info on this online it’s insane.

@mistereearly1141 7 месяцев назад

Can you use a drum sander on a painted deck?

@kristinalittles5613 3 года назад

Thank you for this video. Gives me hopes to finish my old deck. 🙏🙏🙌🙌

@millsmillwork5910 3 года назад

I hope so

@vanceelliott916 3 месяца назад

Either something was clogging the vacuum channel area that sucks up the saw dust / maybe torn paper or the belt had broken for the fan that creates the suction, otherwise that saw dust should have been completely sucked up. Plus that bag would be completely blown up solid from the air flowing into it when it's working correctly

@rickwillson2811 3 года назад

Also, DONT drop the handle into wood. You will cause a major dent. Start moving as you glide into the wood and slowly bring the drum up at the end...Use a blower not a broom also.

@warrenlowe676 2 года назад

This comment should be engraved on every drum sander so the operator knows. Can't tell you how many people ruin their deck by gouging their wood with one of these. Fantastic comment.

@paulbland5625 3 года назад

Next time, tip the sander on its side, to install the sand paper.

@millsmillwork5910 3 года назад

Good idea!! Lol

@krakenwoodfloorservicemcma5975 3 года назад

I have sanded a few decks with a big drum. It works well.. just gotta watch the screws..

@millsmillwork5910 3 года назад

They gone🤣

@davids5006 Год назад

Thinking I'm going to use dimabrush today but sander is my back up

@LarryDavidshow 2 года назад

I think this is a great idea but because decks are uneven (unless the 2x6 was cut even) a belt sander would have been faster.

@arbythepainter Год назад

How many sandpaper did you end up using? And what grit?

@millsmillwork5910 2 месяца назад

2 rolls and 70 grit

@trinhk 3 года назад

I see you didnt have any stain on it before sanding. You think it will sand away the stain as well or would I need to remove the stain first?

@millsmillwork5910 3 года назад

That thing will remove rust from a boat hull! Lol

@chenchen-qb8oq 3 года назад

Should I try to remove the paint first or will it eat through the paint? I want to save some time.

@millsmillwork5910 3 года назад

@@chenchen-qb8oq it will eat the paint right off, but you stand a chance to go through the sanders a bit quicker

@rickwillson2811 2 года назад

@@chenchen-qb8oq start with 100 grit to get used to lowering and raising the drum. The 100 grit will be forgiving and good practice. When your ready for the big leagues go as low as 36 grit. I often use as 16 grit but i've done over 4,000 decks

@paolojose6706 2 года назад

@@rickwillson2811 Hi Rick, would the drum sander be efficient in removing a solid stain off a deck? i'm trying to get back to barewood.

@1Ljf31Luv 2 года назад

Hows about deck with nails? I dont want damage my sander roll

@millsmillwork5910 2 года назад

Get them pounded below wood level first, take the time and get that bit of work done.

@joeavery6587 3 года назад

What grit did you use

@millsmillwork5910 3 года назад

This was the 80grit

@marleigh375 3 года назад

I’m going to try this. My deck is nailed together, not screwed, what will it do to the nails?

@millsmillwork5910 3 года назад

You want to make sure the nails are below wood top level, it can take the tops of the nails down

@fireworx651 3 года назад

that's a drum sander. ok, I see you said that later on. by belts do you mean sleeves? how many sleeves did you use on the deck? The vacuum doesn't seem to working but...good job, deck looks pretty nice.

@millsmillwork5910 3 года назад

Went through 3

@oldtimedrumcorps 4 года назад

Thanks now I know I need to chemical strip wood deck next to inground pool . Way too much dust . Or buy cheap solid cover to keep all that dust out if I sand .

@millsmillwork5910 4 года назад

It does make a fine powder dust, but for the most part manageable. Good luck, and thank you for watching 😁👍

@AndYetHereWeAre 3 года назад

Buy a cheap solid? Goooood luck with taking that off when it wears. You'll have to sand again. This project could have been done with hydroxide strip followed by oxalic wash and then just stain. Never paint your deck with a solid. Oil only.

@oldtimedrumcorps 3 года назад

@@AndYetHereWeAre Cheap solid cover is a pool cover not solid stain . PS. to keep the trash out of the pool .

@brandonmiller1954 2 года назад

Hoping something like this can strip old peeling paint off my deck

@millsmillwork5910 2 года назад

Get the higher grit sandpaper and it will strip concrete of your driverway 🤣 jk it will work but might clog the paper a bit more often.

@dabig77 6 месяцев назад

Powerwash first

@valentinn34 4 года назад

Jajajajajjaa por que me apareció en recomendados esto?

@jefforr9630 3 года назад

You from Johnston Iowa?

@millsmillwork5910 3 года назад

Yes sir!

@jefforr9630 3 года назад

@@millsmillwork5910 im in your neck of the woods. But im in dsm right by Lutheran hospital. Small world.

@milesdavenport8823 9 дней назад

Really a drum sander? You know they do make a 12x18 deck sander. Maybe direct your viewers to that option. The average person would leave many many drum sander channels in their deck by not moving consistently. An actual deck sander, available at most large rental companies would be a better choice for your job and cost no more.

@rickilynnwolfe8357 3 года назад

Iam getting ready to do mine but what about the nails ?

@millsmillwork5910 3 года назад

Try to run them below the surface, it will take the tops off.

@rickilynnwolfe8357 3 года назад

@@millsmillwork5910 ok thank you

@rickwillson2811 2 года назад

@@rickilynnwolfe8357 Counter sink them with a large nail set and mini mallet. Ive done this on approximately 2,000 decks

@rickilynnwolfe8357 2 года назад

@@rickwillson2811 thank you so much appreciate

@rickilynnwolfe8357 2 года назад

@@rickwillson2811 thank you so much I want to make sure I do it right so much appreciate all the advice I can get . I have to do this myself because my husband is stage 4 pancreatic cancer and I don’t have the money to pay someone else to do it . I hope mine turns out this lovely

@planetfabulous5833 10 месяцев назад

He's yummy!

@eriklarson9137 3 года назад

How to look scared and intentionally incompetent for 12:34. Lol.

@millsmillwork5910 3 года назад

Well you never know LOL

@UncleFjester 2 месяца назад

Your video production shows up in your low Subscriber numbers

@millsmillwork5910 2 месяца назад

oh it doesn't have anything to do with the fact I haven't made any videos in over 3 years. your comment carries no weight

@carloso933 3 года назад

You have not idea how to run this machine😒

@millsmillwork5910 3 года назад

Oh no, did i miss your video on how to operate this sander, Ill look for it! 😂

@krakenwoodfloorservicemcma5975 3 года назад

You did fine.. it’s no more complicated than mowing a lawn.

@MILLSOUTDOORS 3 года назад

@@krakenwoodfloorservicemcma5975 your right, just laugh when people troll videos and have nothing to show for there experience,.

@krakenwoodfloorservicemcma5975 3 года назад

Professional wood floor refinishing guys make a bigger deal out of it than it is.. I mean it’s hard work, don’t get me wrong, but nothing complicated. I am no super-genius and I cut a pretty good floor so.. any bozo with a little touch and common sense can do a good job on their first try.