Sanding MISTAKES-How to avoid mistakes? 

First, big thanks for the video! This is somehting, where the clear goal was to educate the viewers and I beleive for such channels, always will be future in our eyes.

Your videos are put together well. Simple to the point. I learned something with no effort. How to avoid those pigtails.

Thank you very much for putting a lot of your sanding experience and sanding secrets in this great video

Thank you for all the awesome videos!! I’ve learned a lot from watching you, there’s a lot of ppl with videos on RU-vid but nothing like you sir a true professional.

Great Man. Top Work. Thank you

I purchased a used one as the piece is a bit pricey, but the machine ru-vid.comUgkxG6fbm3cHBd7CNTjk5D-dwYe9c9tCB9ZN has surpassed my expectations. We sand small parts by hand often, sized around 1"x1/2," and specifically look for a piece that's designed to be vertical. The motor has plenty of torque and great speed settings. The only inconvenience I had is that the disk measures 5" where we trim 6" stick-and-sand disks down easily by mounting it then cutting with a box cutter.

Thanks for the video ..master Alen! Just love your work 🤩🤩💪💪👌👌

Helpful .. thanks a lot

Wow this the is first time I leave comment after watching a lot of RU-vid videos, just a good and helpful video. I will follow your sanding steps for sure :)

You seem to be one of the best wetsanding specialists in the world! I’ve learned a lot from this channel for my business in the US. Also, I really enjoy the text style of communication, I can learn very very quickly. Thanks!

I have always been afraid of dry sanding but I'm gonna try soon🎉

Your are the best! Merry Christmas from Greece!

These are great vids. My wife’s x5 is out of the body shop and needs the orange peel leveled

Going try this bro thank you I detail as well but I think it's time step it up

Very Nice video. i never thought about dry sanding before polish ever until i found your channel. Its been a game changer for me in the bodyshop. I save sooooo much time and i can see what im doing oppose to wet sanding. But i do have 1 question though. Whats the difference between the K2000 and P2000 i mean, what does the letters represent?

Bro Thank you for your super Video. Very interesting to see and read also learn something new. Good job. Bravo. Keep Goin.

Merry Christmas I really enjoy learning from your videos

Perfect job!

The Detail King!😁

Exaclly this is that u say👍👍👍

I've really enjoyed your dry sanding tutorials. I have really learnt a lot. Just one question. You said in the video that the sander has to be flat with the surface so how do you sand the curvy parts of the car? Can you show us in a video, perhaps the entire car instead of flat panels, or at least hard to do areas.

Wow..just this 1 simple video solved almost 90% if what I have been facing. Great video! Btw, how do we know when to change the sanding paper and do you use a dry or damp cloth to wipe away the dust? Does this method apply to epoxy on carbon fibre parts too? Thank you so much for this!

Quero muito iniciar lixamento com kovax lixas !!! 🙏👏👏👏

Great video, when u saying clean surface before sanding, do you recommend to claybar clean the paint before sanding or just good deep washing is enough?

Another good video. Next one, please!

Please provide the video link for polishing between wool and sponge with roto machine

Hello, what is the perfect for sand orange peel, machine rotation or machine vibrant rotation? And how this mirka works?

what's the reference of the "Interface Soft Yellow" please ? VERY GOOD JOB !!

Great video, i think dry sanding is better than wet because you can instantly see if you did a good job and if it needs more work or not. Though i think this only works for flat surfaces (i mean the machine), on a bumber with a lot of curves and edges i would do it by hand so i dont oversand the square edges. I want to do my front bumper to remove the orange peel and i think i'll do it by hand exclusively because i have more control. I only have a question, do you think it would work on a water based paint? Thanks in advance

1st song?

How long do the kovax discs last and how do you know when they’re dead?

Perfekcionista Profesionalac

Your videos are awesome however the sander you use Mirka is very expensive 700-750 especially if you are only going to do one car and not pursue this as a trade. If I were to buy a Dewalt or a Mikata is the same pad with holes available and adaptable for those machines? I tried looking up the sand disks you are using and can't find them anywhere. Could you post sources for them? Thanks for the great videos that are to the point and not a lot of (hey look at me and listen to me talk) videos. Would appreciate your reply.

it will be very helpfull to show us how you prepare the surface for dry sanding, i mean how you clean the surfaces before dry sanding.....? washing with soap water , decontaminating ..?? how ?

All my local market offer all over is 125mm/5 inch carpentry ones. All my suitable grits local market papers are 150mm and they only offer airhuggers with discs to fit, unless I go polishing machine. Hard to level right to surface... Could you link me a good online 150mm palm fit one at 230 VAC ?

Hello from Bulgaria, how you know u are done with sanding? And when switch 1500 to 2000 ? And i polish only with DA machine can u remove the sandmarks without they cone back after?

would this method work best on a show car finish or would you suggest a 2.5 mm (finer) da?

@Amd detailing Question would I get the same results with the mirka air version. I’m sure my compressor is more than capable. It’s 80 gallon and around 16cfm @90 psi. Also I wasn’t sure about your tool work speed. At what rpm are you using thanks.

Very nice job! Since when do you use a Mirka Deros, and what type?

Super Assilex Sanding Disc K-1500 = Peach Super Assilex Sanding Disc 2000 = What color or Number is the blue disc ??? Thanks !!!!!

Hello, the backing plate between paper and the machine, how thick it should be?

Why not use a rotary polisher?

Hello.❤ I have one question, if i sand panel with 2000 by hand to remove orange peel and then 3000 with sanding machine, will it be easy to polishing with polishing sponge ? Not wool pad

How about Video with Sanding Metal flake and Candy paint job?

How are you removing orange peel with the soft pad? This will only remove the microns, but it will keep the orange peel texture right?

That’s a great video, good information for a newbe. Only one thing…because I’m not fully bilangual, I have to pause a lot of times to take the time to read your text. Can you just add a 2-3 more second on each text ?

Major differences between SuperAssilex vs SuperBuflex? Or which you prefer.

Can I use a DA machine to remove 2000? I don't have rotary

Жаль что нет русского субтитра. 😢 russian subtitle please. I want to study your methods in this job. i am from USSR

Da li je moguće brusiti ručno bez mašine ili je mašina neophodna i svaka čast na klipovima

2000 paper how much speed

Rather a voice with some explanations than just random music.

Sono Italiano e sono interessato alla kovax ma costano molto qui

Your vacuum looks like it not working, so why bother lining up the holes?