Save multibodies solidworks as parts and assembly

Подписаться 85 тыс.

Просмотров 77 тыс.

50% 1

Save multi bodies or cutlist solidworks as parts and assembly
Q 1 -How to fully defined your sketch in solidworks
• How to fully defined y...
----------------------------------
Q2- رسم ومحاكاة وتصنيع CAD-CAE-CAM
• رسم ومحاكاة وتصنيع CAD...
----------------------------------
Q3- ازاى احفظ كل اجزاء الconfiguration
• Save solidworks config...
----------------------------------
Q4-مشكلة عدم ضبط الوحدات بشكل دائم داخل سوليدوركس
• مشكلة عدم ضبط الوحدات ...
----------------------------------
Q5- SOLIDWORKS Hardware & System Requirements
• SOLIDWORKS Hardware & ...
----------------------------------
Q6- Make Solidworks at Maximum performance
• Make Solidworks at Max...
----------------------------------
Q7-Why crash happend in solidworks
• Why crash happend in s...
----------------------------------
Q8-Black screen on New Part in solidworks
• Black screen on New Pa...
----------------------------------
Q9- Adjust your Graphic card & Activate Real view in Solidworks
• Adjust your Graphic ca...
----------------------------------
Q10-Solidworks Convert Spline to lines & Arcs
• Solidworks Convert Spl...
----------------------------------
Q11-Backworks for solidworks to save future versions into previous
• Backworks for solidwor...
----------------------------------
Q12-Fit arrow with dimensions scale in solidworks
• Fit arrow with dimensi...
----------------------------------
Q13-Enable Snapping tools in Solidworks
• Enable Snapping tools ...
-----------------------------------
Q14- الابعاد فى صورة كسور(Fractional Dimensions In Solidworks)
• الابعاد فى صورة كسور(F...
-----------------------------------
Q-15 Solidworks RX عمل صيانة دورية للسوليدوركس
• Solidworks RX
-----------------------------------
Q16- recover a missing SOLIDWORKS Design Library Folder
• How to recover a missi...
-----------------------------------
Q17-Solidworks Files Double clicking doesn't open the file
• Solidworks Files Doubl...
--------------------------
Q18-Reset solidworks setting
• Reset solidworks setting
-----------------------------------
19-Solidworks copy setting
• Solidworks copy setting
-----------------------------------
Q20- Solidworks Shaded Cosmetic threads
حل مشكلة عدم ظهور تظليل القلاووظ بشكل دائما
• Solidworks Shaded Cosm...
-----------------------------------
Q21- SOLIDWORKS Section View makes my model appear hollow عند عمل قطاع مؤقت يظهر مجوف كأنه سيرفيس
• SOLIDWORKS Section Vie...
----------------------------------
Q22-Missing hole wizard oR missing solidworks template
حل مشكلة عدم وجود ملفات Hole wizard او تمبلت السوليدوركس
• Missing hole wizard oR...
---------------------------------
Q-23 Save 3D PDF in Solidworks
احفظ ملفات سوليدوركس 3D PDF
• Save 3D PDF in Solidworks
---------------------------------
Q24-Convert Toolbox Part to a Regular Part File
الغاء ارتباط ملف ال standard وحفظه كملف سوليدوركس عادى
• Convert Toolbox Part t...
---------------------------------
Q25- How to recover a missing Toolboxing SOLIDWORKS
• How to recover a missi...
---------------------------------
Q26- Dimensions font size in Solidworks حل مشكلة عدم تنسق الابعاد بالسوليدوركس
• Adjust dimensions font...
---------------------------------
Q 27-Save &Restore your solidworks settings
• Save &Restore your sol...
---------------------------------
Q28-SolidWorks MOD-DIAM Fix
• SolidWorks MOD-DIAM Fix
---------------------------------
Q29- Solidworks can not move the assembly model
• Solidworks can not mov...
---------------------------------
Q30-فيديو الرد على المشاكل والاستفسارات المرسلة لينا
• ICC Webinar-1
---------------------------------
Q31-فيديو الرد على المشاكل والاستفسارات المرسلة لينا -2
• ICC Webinar-2
---------------------------------
32-Solidworks missing task pane , Head up , command manager
• Solidworks missing tas...
---------------------------------
33-Solidworks forming tools inserted as derived part
• Solidworks forming too...
---------------------------------
34-Show the default Planes
• Show the default Plane...
---------------------------------
35-Solve change Transparency problem in solidworks
• Solve change Transpare...
---------------------------------
36-link material in solidworks Bill of material
• link material in solid...
---------------------------------
37-Download weldment profiles standard in Solidworks
• Download weldment prof...

Наука

Опубликовано:

18 май 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@user-fj8fd2nz5w 17 дней назад

Thank you very much. From last year I'm thinking that how to save bodies from a part drawing now i got it easily. I appreciate that.

@AliNasser 17 дней назад

Best of luck to you 🌹

@DP-xu2jf 3 года назад

This video has been a help towards assemblies and parts. Many thanks.

@AliNasser 3 года назад

You're welcome.

@atofficial9957 2 года назад

@@AliNasser Error failed to save document solidworks save bodies help me! thank you

@thisandthat7589 4 месяца назад

Thank you! I was struggling to figure this out.

@AliNasser 4 месяца назад

Best of luck to you 🌹

@mohamednabil5094 2 года назад

بسم الله ما شاء الله يا باش مهندس ممتاز ربنا يبارك في علمكم

@AliNasser Год назад

بالتوفيق بأذن الله 🌹

@sweisslrisschweiis7762 12 дней назад

thank a lot for help me. have a nice day bro

@AliNasser 8 дней назад

Best of luck to you 🌹

@aviator267 Год назад

Brilliant thank you so much

@AliNasser Год назад

Best wishes for you 🌹

@45jtxditonton85 3 года назад

thank you very helpful

@AliNasser 3 года назад

You're welcome!

@INGHUSSAMKAMEL 5 месяцев назад

was helpful. Thanks

@AliNasser 5 месяцев назад

Glad it helped!

@zoommeeting998 11 месяцев назад

V v useful video ❤

@AliNasser 11 месяцев назад

Best of luck 🌹

@mansakan9719 5 часов назад

How can a create stepfile of Assembly which have parts saved inside assembly!?

@benfrnidhal 3 года назад

مشكور

@AliNasser 3 года назад

الله يحفظك بشمهندس 🌹

@minhtuyenle692 15 дней назад

Thank you very much

@AliNasser 15 дней назад

Best of luck to you 🌹

@pako_tube6898 3 года назад

thank you sir

@AliNasser 3 года назад

You are welcome 🌹

@ditseyha9462 2 года назад

Thanks sir.

@AliNasser 2 года назад

You are welcome!

@redabouassaba5064 5 месяцев назад

thanks brother

@AliNasser 5 месяцев назад

You are welcome 🌹

@5g8ohsl 3 года назад

Thanks 🙏

@AliNasser 3 года назад

You’re welcome 😊

@0beliskas 2 года назад

When you save it as assembly do parts keep its original places or do you need to mate them together? Looks like cool feature if can check moving mechanism to see if it works as intended in assembly mode since you can't do it when you model the entire thing as part.

@AliNasser 2 года назад

The assembly extracted from multiple bodies of part will jut keep its original place and if you need to make animation, you will need to add suitable mates.

@Mohamed_zyd 5 месяцев назад

thank you

@AliNasser 5 месяцев назад

Best of luck for you 🌹

@saykatislam9518 2 года назад

Thanks a lot

@AliNasser 2 года назад

Best wishes for you 🌹

@jebuswookiee Год назад

Thanks for the video - I am just wondering if it is possible to do this for a multi-body sheet metal parts and have them saved out but then also still being able to flatten the pieces. I have been trying to work this out but am having no luck as it coverts them only to Solid-bodies. Any help would be greatly appreciated.

@AliNasser Год назад

Yes, you can do that but for Flatten you need macro or use isolated techniques. Check out the below links : التعامل مع Macro لحفظ جميع اجزاء ال Configuration ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TOkyGQ2qdnw.html ... Automatically Convert Solidworks Assembly Sheet Metal To Flatten DXF ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iOE4cwfuciU.html ... طريقة الحصول على الافرد لكل جسم داخل لوحة الرسم التنفيذى باعمال الصاج ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2AQNyIOtAb0.html -- Save multi bodies or cutlist solidworks as parts and assembly ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-A0vLgZUfR4E.html

@DGNG-dd3to 3 года назад

That is how you do this!!! Thanks for the video! Only one issue I have. I can't edit the exported parts after saving them all. Feature Works isn't showing up??

@AliNasser 3 года назад

Your welcome, you can edit the master model and It will effect on the saved bodies.

@ajesenko Год назад

Thank you. I have a question: I have a 3d model which contains 1000+ bodies. SW detect each one as separate part even thou, many of them are the same. Can I somehow detect same bodies, so I wouldn't end up with bunch of same files.

@AliNasser Год назад

Hello, You can try to save file as assembly and then control parts as you wish.

@Ryohgantz 2 года назад

Thank you for the tutorial. I ussualy use the "insert into new part", and it's really wasting my time bcs i have to selecting the bodies one by one. haha

@AliNasser 2 года назад

Best wishes for you 🌹

@stefanmarkovic9623 3 года назад

I must try this,this is so good.. does it work for weldments? :)

@AliNasser 3 года назад

Yes it does!

@Mustafa-sd2mc 3 года назад

thanks sir i have a question after saving bodies , when i edit something in the main part , the child part doesn't response to this modify , why this occurs and thanks you one more time

@AliNasser 3 года назад

after editing the main part you have to resave bodies again.

@Mustafa-sd2mc 3 года назад

@@AliNasser ok thanks my teacher

@mohamedelnemr8259 Год назад

الله ينور عليك يا باشمهندس سؤال بقي لة الفايل step و هوا اصلا solidasm ,و مش معايا البارتس نفسها في طريقو اجيبهم

@AliNasser Год назад

الله يحفظك، ممكن تضيف المشكلة او استفسارك علي جروبنا ليستفيد الجميع وبأذن الله هيتم الرد علي حضرتك facebook.com/groups/ITEHADCADCAM

@alishi7ade122 Год назад

hi , I have a problem in converting weldment into an assembly the repeated body don't save in the assembly as a repetition, but it's saved as different parts for example the identical legs of a table are saved as 4 parts not as a single part copied 4 tames , is there a solution , by the way Iam using SOLIDWORKS 2019

@alishi7ade122 Год назад

because I need a it so save as a single part for the bom

@AliNasser Год назад

It seems an issue in solidworks template, try to restore default settings or change this version..

@ahmedgerza1753 3 года назад

بعد إذنك فيه ملفات بصيغة SOLIDWORKS app 2019 مثلا فيه أيقونة bodies ليه مفيش فيها خيار حفظ bodies

@AliNasser 3 года назад

اهلا بحضرتك ، ممكن تضيف المشكلة او استفسارك علي جروبنا ليستفيد الجميع وبأذن الله هيتم الرد علي حضرتك facebook.com/groups/ITEHADCADCAM

@huseyinelnasen 3 года назад

الله يبارك فيك بس لو كان بالعربي

@AliNasser 3 года назад

ربنا يحفظك ، شرحنها عربي في بلاي ليست مشاريع اعمال صاج ru-vid.com/group/PL4MOa_MJAEeclgd63LFKT-VZ4YVjNVwg0

@kevindarmawans Год назад

Sir, i have a quietion please help me to fix this.. When i want to combine 2 part, there's a message "unable to create single body that is the sum of the input bodies" so i can't combine the 2 part.. how to fix the problem, thankyou very much 🙏

@AliNasser Год назад

Hello, Try to save original part before that and try again.

@khaledmoi7198 11 месяцев назад

How can we do the reverse?

@AliNasser 11 месяцев назад

Hello, Using combine or assembly to do that.

@ammarboucetta9640 2 года назад

استاذنا، هل يمكن تحويل صيغة corps surfaciques, الي قطعة بصيغة السوليدوركس.تحياتي

@AliNasser 2 года назад

ممكن تكتب الصغية باللغة الإنجليزية.

@ammarboucetta9640 2 года назад

مشكور استاذنا، لقد ارسلت لك صورة توضيحية من البرنامج، في LinkedIn.تحياتي

@ahmedabdelaziz5597 3 года назад

لما باجي اعمل save body بتظهر رساله. Failed to save document ايه حلها

@AliNasser 3 года назад

احفظ الموديل الأصلي قبل حفظ bodies,

@ahmedabdelaziz5597 3 года назад

@@AliNasser انا بعمل كده بس احيانا بتظهر الرساله دي و أحيانا بيتحفظ البارت بس بيكون فاضي

@AliNasser 3 года назад

@@ahmedabdelaziz5597 مشكلة في template, أعمل reset واتأكد إن النسخة لاتقلق عن sp2

@abdoisam3108 Год назад

كيف ممكن لو عندي اجزاء كتيرة احفظها كقطعة واحدة فقط علشان عايز احلل في الانسيس بالطريقة حيتحفظو كجزء واحد؟

@AliNasser Год назад

يمكنك حفظ بأستخدام الامتدادات التالية ؛ Save as: .sldrt .xt .IGS .stp

@abdoisam3108 Год назад

في الحقيقة انا حفظتا بس الأجزاء 555 والانسيس غير قادر يعمل الحاجة دي لانو امكانيات الجهاز ما اقوى حاجة

@abdoisam3108 Год назад

لو قدرتا انزلتو بصيغة IGES بس كجزء واحد لا يتجزأ يمكن الانسيس بقدر يعمل ميش

@surajprakash3264 2 года назад

Sir I am new solid work can you tell how to Import A part into A same openet file

@AliNasser 2 года назад

Just drag and drop into solidworks or from main menu ,go to file then open and make sure you selected show all files extensions.

@surajprakash3264 2 года назад

@@AliNasser thanks sir

@Salsudi 2 года назад

is it possible to save to igs?

@AliNasser 2 года назад

No, only. Sldprt and. Sldasmbly.

@Salsudi 2 года назад

@@AliNasser ok and it is possible to save the list of cuts so that after saving a given element is under x or y in the coordinate system?

@shekiba.646 2 года назад

I know SW features > open part but not Assembly can't find open part.

@AliNasser 2 года назад

Just drag and drop to open..

@brunoseromenho9086 3 года назад

Just out of curiosity, are you from an arab country? You don't pronounce the "p" and there's no "p" in the arab alphabet. That's why I'm asking. Your english is great though

@AliNasser 3 года назад

Yes, i am from Egypt.

@mr.chatreebooncherdchoo2998 Год назад

show alert "Failed to save document"

@AliNasser Год назад

This message seems to be your solidworks version has an issues so try to do like in the below video : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lAfooFXuhSI.html