Good morning. I'm a retired carpenter. I see some comments about wood being wasted. I'm not so sure of that. It's just wasted in a different way, but it looks like about the same amount of waste to me. The soft wood on the exterior of the log doesnt have the value of wood further in, anyway. I prefer your techniques over the band saw as well.
I used to work at a sawmill similar to your setup you have. I loved the job. I'm happy to see you give your employees time and you are patient for them to do there job safely.
I used to worked for 19 years in a furniture factory where we used cherry for 80% of our end product. We used 4/4 FAS and had to cut around the small defects at some point during the sawing phase. The log you just cut was driving me crazy with all the wain and face checking. Not rushing your guys is admirable . Safety is so important with an open blade of that size in the room. Kickbacks must be frightening when it happens there. The sawyer and crew seem to be a very good team.
My employer had a twin blade set-up. And the edger set-up was less than five feet from the saw blades. I would get covered in debris all the time when we would cut big timber. I loved the job but it became quantity or quality and safety kinda went out the window. And I felt like the job wasn't worth me getting hurt so I left and found other employment. Love watching sawmills like yours cause I have been around sawmills my whole life.
I've watched several of your videos and can't help but notice you apologize fairly often about how you cut the logs. Apparently some people don't like your method for whatever reason, be it waste or some other reason. If people watch your channel they know what you have to work with in a sawing system. They should know from the first glance of your setup the limitations you have to work with. I wouldn't apologize for working with what you have. If people don't like it then they can watch another channel. Anyway, keep doing what you're doing as the rest of us love to see what you're up to and enjoy the cathartic nature of watching you saw logs...Happy holidays and I'll keep watching.
My parents bought some cherry furniture in the mid-1950s when I was 6 yrs old. It was produced in North Carolina. Watching your videos give me another perspective on the production of that furniture. Thanks for what you do.
This grain pattern looks just like my mom & dads first dinning room table & China cabinet. Solid cherry. It was made at a cabinet shop in the erarly 50's near McConnellsburg PA. I still have both pieces. Still looks great after all these years. Love watching your videos.
Great video as always, keep them coming. That saw sawing into those logs reminds me of my childhood when i use to work in my neighbours frick sawmill. use to hear it sawing clear up the road from where i lived, i use to run up to the mill to give him a hand. loved being a kid .
❤ I'm 54 and loved rough cut lumber since I can remember Lived around farms all my life except the past 3 years I'm in Pittsburgh and you guys are doing God's work Beauty is on the inside thank you
Love the cherry wood, some of those boards were very good, your variety of cuts will suit furniture makers. Thanks for the showing the milling process of the cherry log, don't see much of it out in Western Australia, I was lucky to get some boards twenty five years ago, it can be beautiful.
New subscriber here. I have never seen how raw wood was processed into finished lumber. Especially what I would call furniture grade wood like cherry. Amazing!
Yes in joyed the log sawmill sawing making lumber. I did what your buddy was doing,putting the wood away or lumber away. Great job showing and telling, yes my buddy that owned his mill had bad days to. Well thanks for showing buddy great sawmill you got there, keep up the good work be safe see ya next time see ya bye.
Well the diameter of the log is so big compared to the saw blade . You have no choice but to wittle it down to make it more manageable. You really don't waste that much wood.
That was an amazing log! I like the edger and the potential it unlocks. Going to have to try and find one soon. Great sawing those wide boards had me drooling. 😂❤
Unlike most I like the big log's and the stop sign cutting. First you're able to remove the sapwood and the only thing left is beautiful 😍 clean grain. Don't forget let your haters be your motivators. As always good luck and God bless.
I think that if I didn't live thousands of miles away, I would visit at least once a month and go through your scrap pile. There is something hypnotizing about watching. You might not appreciate watchers for insurance reasons, at least the ones who just show up.
I had just the worst day in a long, long time.... didn't want to watch news or anything I normally do... just didn't have the stomach or heart for it. I finally thought I would help y'all saw that big cherry log and I'm glad I did. Thank you for easing my mind....
Never mind the Arm Chair Experts.... Nice job. No matter how you ended up sawing it. My cuts on my manual 30" band may not be ideal for everyone else. But rest assured,. they ended up exactly how I wanted them. And it's ALL my money, nobody else has a cent in it.