No video :(

Scalding HOT EVIL Filter of DEATH! SEVERE Smoking! Jeep 4.0 Cherokee / Wrangler

Подписаться 584 тыс.

Просмотров 307 тыс.

50% 1

Cut Condenser Video: Customer States...WAIT, look at this! Can't make this stuff up! • Customer States...WAIT...
Visit my Second Channel on RU-vid, RainmanRay Off Duty / rainmanrayoutoftheshop
Follow on Twitter: @RainmanRay4Real
TikTok: www.tiktok.com/@rainman_rays_repairs
Check out my Merchandise (because I don't say MERCH) for Men's and Women's Apparel, MUGS and Stickers! rainmanraysrep...
Support the channel on Patreon: / rainmanraysrepairs
Patreon is a "Tip Jar" I don't post much there, daily YT uploads are all that I can manage for now
Amazon List, must have for any toolbox!
1: Astro Tools 52SL 500x2 Lumen Wirelessly Rechargeable Folding Double-Sided LED Slim Light, & 52SLC 500x2 Lumen Folding Double-Sided LED Slim Light W/Wireless Charging Pad amzn.to/3Jd2h6t
2: Mountain 5-Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set; 8 mm - 18mm, 90 Tooth Design, Long, Flexible, Reversible; MTNRM6 amzn.to/3OJTRp2
3: NOCO E404 12.25 Oz Battery Terminal Cleaner Spray and Corrosion Cleaner with Acid Detector amzn.to/3ILbdjv
My Camera Gear:
Gopro Hero 10 amzn.to/3AaxELe
Hero 9&10 Dual Battery Charger MUST HAVE! amzn.to/3g5KdAT
Flexible Camera Mount amzn.to/3Jywrk5
#brakecleanmafia #wifeunit #rainman #comnissionearned #mechanic #technician #dealer #independent #autorepair
As an Amazon Associate I earn from qualifying purchases.
Also, I personally use or have used the products featured in my links and only recommended them if I feel they are of good quality.
”Intro Music by Karl Casey @ White Bat Audio”
Thanks to Jesse for making the intro and graphic for us to enjoy!!!
“All the videos, songs, images, and graphics used in the video belong to their respective owners and I or this channel does not claim any right over them.
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing.”
Customer Customer States Mechanic Fails Engine Transmission Gas Diesel off road race 4x4 street car daily driver scam dealership dealer technician how to

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@nbrowser Год назад

This channel has only gotten so much better since Ray opened his own shop, seriously man you're so much more fun to watch lately and I find it refreshing.

@Treeves30 Год назад

I couldn't quite put my finger on why Ray's channel has seem to be more improved..........but you said it perfectly! He has something called "Freedom" to do what he wants and be who he is now with his own shop!

@rickm1255 Год назад

Ray doing what I get called out for all of the time while training new techs. "Ok, raise the truck and get a sample. Move, let me push the button, give me that wrench, give me that cup, etc. Why are you just standing there"? 😂 Thanks for putting up with us, young fellas.

@mred8002 Год назад

That’s what I pointed out in a previous post, when he started teaching Wife Unit, that he didn’t try to micromanage her,yet gave her enough information to make decisions. Sign of a good teacher!

@Taylormade2350 Год назад

You sound like a douchebag

@taborgreat Год назад

after enough time, you find that you live both sides. having someone to boss you around and steal all your earnings is nice in a way.

@takedeadaim8671 Год назад

One box of stainless wire brushes from McMaster is about what one can of brake cleaner and will remove more sludge faster than half dozen cans of aerosol poison. Just saying.

@mikenyc1589 Год назад

Congrats to Troy for keeping shop clean and organized...looking good!!

@46bovine Год назад

Troy needs to visit my garage and do the same. So sayith Bob the Slob. I can’t keep the durn place neat.

@mikenyc1589 Год назад

@@46bovine LOL...probably most shops are messy

@gaiustacitus4242 Год назад

@@46bovine My shop used to generate 12 x 55 gallon barrels of metal shavings a day. Part of the job was for every machinist or machine operator to clean the machine tools, all work surfaces, and the floor during the last 30 minutes at the end of every shift. If you let a mess get ahead of you, then it becomes a really big job.

@rick980 Год назад

@@mikenyc1589 garage I go to nowadays he paints every few years, in there almost every Saturday cleaning the floors. Tools are all hanging up and each one has its place. Puts then back after reading each job as does his son.. The more I think about it if you are happy working in a mess good for you. I just think that as a customer you want to think the job was done complete and not half assed. If you don't have time to put tools away then can you get the job done right

@bob.bobbington Год назад

Troy is looking like a brilliant addition to Rey's skills. He's a lucky kid and will learn a crap ton of stuff from Rey, who seams a great teacher and they both seem really chill to work alongside.

@george8873 Год назад

Was honestly surprised how much cleaner the valves and stuff looked the final time you took the valve cover off after running the cleaner through the engine. Seems to have cleared up the smoking problem. Also, seems like Troy genuinely enjoys learning. I can see why you hired him. Plus his personality meshes with yours perfectly, lol.

@forgetfulme1719 Год назад

the cold start burned off lots of oil that dripped into cylinders from worn valve .stems seals, he needs to restart jeep tomorrow cold to see smoke issue was cured by BG

@capnpugwash5403 Год назад

Got to admit, pleasantly surprised by the result. Pity you didn't do a compression test prior and post treatment. also an opinion of the power pre and post.

@kevinhill5596 Год назад

Great idea! 👍

@UseAndGo Год назад

Im totally blasted by this super stuff effects.. since I was sure that this shit doesnt work... so next in line.. get the same stuff and do it on my jeep =P... can we get product links =P

@UseAndGo Год назад

@@worldsend69 busy ppls .. come here to north Finland and try that again... I bet some sort aneurysm while trying it

@levisvarela3735 Год назад

take for a spin, if it run good, there you go, but on a engine that old, i would go 10w40, my 318 seen to like it more than the 10w30

@capnpugwash5403 Год назад

@@IR-nq4qv the second option is seat of the pants, and really just guesswork, the first option would be factual observation. Nothing self contradictory about it.

@wolfgangweber9924 Год назад

My day begins with watching a Rainman Ray's Repair video. This habit is starting to pay off. Yesterday I did an oil change in the driveway and it was the cleanest ever: no oil dry required. This video was an oil change to the n-th degree!

@briandasno1714 Год назад

I'm a home repair specialist and I still start my day everyday with watching Ray. That was not meant to rhyme it just happened

@wolfgangweber9924 Год назад

@@briandasno1714 "It might work-it might not. But it's definitely worth a shot." -- accidental poem by Rainman Ray

@mmes307ify Год назад

Did you say click a few times lol

@JoshuaJonah Год назад

@@mmes307ify That's an old one, even for us millenials, AvE was the steward of that term.

@marcmendes6961 Год назад

Loved seeing Troy throw his official shirt on once he knew the camera was coming for him... and Ray, you showed much restraint in not mentioning the garden hose hack until the end 🤣

@KekeeBlack Год назад

I liked the garden hose 😂 reminds me of stuff Pole Barn Garage would do

@marcmendes6961 Год назад

@Keelin Blackburn I appreciated the ingenuity of it... you gotta do whatcha gotta do. At the same time, it stuck out like a sore thumb and would have been an easy target for Ray to make a "Jeep thang" comment. 🤣

@tiredoldmechanic1791 Год назад

Back in my dirt track racing days, we used to pull engines out of junk cars that were dirtier than that. We ran straight 40 Valvoline racing oil in them and after a few races, they were clean inside. We ran it because the Super America stations would have a sale on it in the spring. We bought cases of 24 cans for $7 a case in the 70s. The 40 weight kept the oil pressure up and the engines didn't smoke as much. In Florida, you could run 40 or even 50 weight oil. No need for multi-grade oils if it doesn't get cold.

@rayshutsa6690 Год назад

Congrats to Troy for keeping the shop clean. Both of you are making a great team.

@eaglerider1826 Год назад

Anyone else notice that Ray left the oil drain plug magnet on the bottom of the lift arm . I think Troy grabbed it .

@AquaPeet Год назад

Yes I saw the dangly bits!

@sarahshipman413 Год назад

Yeah I noticed that too lol

@richardalexander7089 Год назад

At least attached to the lift arm, he knows it will stay in the shop. 😊

@ThomasLeonardSr Год назад

I've got to comment on your ability to make me and obviously 10's of thousands of others tune in daily to the Ray hands-on mechanic show. You are a natural born walking, talking, and working showman, utterly amazing. You are blessed and a blessing, as it should be.

@JoshuaJonah Год назад

I think you mean "one-hand mechanic"

@superb60ce Год назад

Great video of the process. But the gasket you used (Fel-Pro VS 50458) is for the 96 and later with a steel valve cover. The part number for the aluminum valve cover is VS 50522...I learned that the hard way.

@StrongDreamsWaitHere Год назад

I’d probably change the oil after 500 miles or so. Might also drop the pan and check the pickup tube.

@johnmarino4085 Год назад

I’ve found that pouring oil with the opening at the top instead of the bottom allows air to displace the oil eliminating the glug glug effect

@NoWr2Run Год назад

I hold the jug sideways.

@thomas7770 Год назад

I prefer a funnel.

@NoWr2Run Год назад

@@thomas7770 ? We're talking about How you pour the oil not what you pour it into.

@thomas7770 Год назад

@@NoWr2Run oh, in that case I go with a 47 degree tilt of the oil jug.

@goose32373 Год назад

Back in the day when we had oil cans, you would make a hole in opposite sides on the top. One for pouring and one for air. That's got nothing to do with this conversation but it reminded me of that.

@jeremybearce8233 Год назад

Just as a tip, the shop I work at uses old electric floor cleaning pads in the oil drains to prevent oil splatter and it catches the drain plain and crap - approximately 24 inches across / circular

@erikpreston1805 Год назад

One of the most interesting oil changes I’ve seen.

@imagseer Год назад

It would appear that those snake oil cleaners really do work; I hope Ray gets around to showing us what the filters caught.

@edifyguy Год назад

@@imagseer It depends on which ones. Some are definitely better than others.

@scpballer2171 Год назад

When Troy got splashed by the hot oil.... That scream tho.

@davebaker489 Год назад

I did a engine flush ONCE before. (also on a jeep) It cleaned the engine so well that oil started leaking from each and every place possible. Like I said once!

@nicholassammauro4941 Год назад

The Top 2 Engine Restorations on the planet, BG EPR and BG Dynamic Engine Restoration….Excellent demonstration Ray and Troy

@babaganoosh555 Год назад

Love that BG process! Always impresses customers when you can show them before and after pictures of the valvetrain and the bottom end (if the sump is easy to remove) and when it saves them an engine rebuild it's even better!

@handbananaistherapist642 Год назад

Years ago, a buddy of mine had an old Ford truck with a 300 in line 6. It had a brazillion miles on it and it ran ROUGH! He was ready to ditch it, but I had an idea. We drained all of the oil and filled it with 5 qts of ATF and ran it for 30 mins. Drained it (all kinds of weird gloop and glop came out) filled it with 20w50 and it ran like a champ!

@john7017 Год назад

If you keep the oil changed regularly, that engine will go 500,000 miles no problem.

@jsh6952 Год назад

Those old Ford 300 I6 motors can last a million miles. They were originally tractor engines in the Ford and Fordson tractors from the 1950s. Low compression long stroke engines, you could almost run them on any liquid that would burn....

@redzed40 Год назад

I bought a car off a workmate once who told me he had for some reason it had a oil change but he had paid a bit more for engine flush too..driving it about a few weeks I had the oil light flick on a few times..looking into this i checked oil which was fine so put it down to dodgy connectors on the sender unit..so I cleaned all the contacts and the problem seemed to have be have cured..next day I was driving to the airport with the family in the car and driving on the motorway at 5am at 70mph the oil light flickered ten 10 seconds next 300 meters it came on solid before i could pull over the engine blew up and threw two crank rods though the engine block also resulting in a fire..lucky i had a fire extinguisher..turns out after stripping the engine down the oil pickup strainer was blocked with carbon that the engine flush had dislodged and starved the oil supply resulting in engine seizing, a very expensive oil change

@Parknest Год назад

Some oil flushes will dislodge the deposits but leave them elsewhere in the enigne. This is why you do an oil flush just before you drain the engine oil to get rid of the depsoits before they end up elsewhere in the enigne. The BG products get round this problem by keeping the deposits suspended in the oil so that they will all come out when the oil is drained. I suspect that whoever did the oil flush just added it after the oil was changed. Anyway, I swear by BG products myself and I absolutely trust them.

@pebosk Год назад

I saw the drain plug magnet hanging on the bottom of the rack when it was going down, hopefully it didn't crush the handle.

@confuse3671 Год назад

On old inline 6s, suggest you check the timing chain. Its probably super loose and at the same time, drop the pan and replace the oil pump. That motor would be good for another 200K miles.

@creekdweller9662 Год назад

I agree, I’d drop the pan, clean out the oil pickup tube, replace the oil pump, and change the timing chain and tensioner. That many miles means there is slack in a lot of the parts

@douglasburnside Год назад

Sure, then as long as you're in there, do the rod and main bearings. Better do the front and rear main seals too. Since the crank is out to do the rear main seal, better pull the heads and pistons so you can hone the cylinder bores and replace the rings. Since the heads are off, do the valve guide seals, and since the valves are out for the seals, better replace the guides. New guides means you should regrind the valves and seats to get proper sealing. Of course, since you already replaced the oil pump, you really should replace the water pump too, and no sense replacing the timing chain without replacing all the chain guides, the tensioner (does the jeep use a chain tensioner?), and all the belt pulleys and tensioner too. Finally, since everything else has been refurbished and replaced, why not make it a clean sweep and change out the alternator too. Ah, the hazards of "...while you're in there." 😀

@alanburkhart7036 Год назад

@@douglasburnside and after all that is accomplished why not add a new jeep too.

@stuartdwight8191 Год назад

That would be cost effective if planning to keep engine.

@Bellboy40 Год назад

@@douglasburnside Ha, ha! It never ends, does it? Those "while you are there" moments will get expensive.

@LouieG777 Год назад

@ 38:12 Ray couldn’t fight the urge, he just had to get in on that Brake Cleaner action. He couldn’t let T-Dog have all the fun. 😂😂😂

@hmccall3 Год назад

Lol, I especially love the garden hose tubing. Definitely a Jeep thing!

@JimmyMakingitwork Год назад

I’ve had a couple of these that you could rock the valves 1/16 after pulling the head apart. But the bottom end was ok. Crankcase flush and Decarbon helps a lot of them also. But it seems hot and miss. Nice work.

@grahamheath3799 Год назад

Hot stuff eh??

@ChurchOfTheHolyMho Год назад

re: that gasket... I wonder where that super scraper tool went... I have no need for such a tool, but it has been on my "like to have" tool list since Ray showed it some time ago. lol.

@thomas7770 Год назад

You referring to the carbide edge gasket scraper? Good tool, two thumbs up 👍🏻👍🏻

@legionofanon Год назад

I bought one because of ray. I havent used it on my truck yet but I did use to to remove some silicone gunk from around my sink drain, its super nice

@ronaldsmith6745 Год назад

That is what I was wondering.

@Dysl3xicDog Год назад

lol the garden hose is cracking me up.

@kennpeters1973 Год назад

I've realized why I like Ray having Troy in the shop. Ray gets to banter with someone like he occasionally did in the other shop. Didn't realize I missed seeing/hearing that. It's a good dynamic for him. Also good to see Ray teaching.

@theundergroundlairofthesqu9261 Год назад

Yep, when I first round Ray he had Peter working in the next bay.

@DocJeep1 Год назад

The gray vacuum line goes on the top of the heater valve. 👍😉

@davidcraven277 Год назад

Try using a quart of atf its all thin oil and detergent run for a few days and change out works pretty good

@robertsturtevant6185 Год назад

I love when Ray is bantering and at the same time teasing Troy…….it’s like Ray has gone back in time and is doing it to his younger self 😂😂😂

@johntarver5684 Год назад

Troy gets teased about not wearing shirts, he should get Ray on wearing shorts 🤣

@Rekuzan Год назад

The kid still needs to learn how to dodge a wrench because, yaknow, gravity! I can't count the number of times I've accidentally tattooed myself on the forehead like that... 🤣🤣🤣

@pcspecialistpdx Год назад

It's like going back in hisTroyRay

@DocJeep1 4 месяца назад

My favorite!! Love my 94' and 95' Cherokee 4.0!! Thanks Ray!!

@jcnikoley Год назад

I learned the hard way not to poke my finger through the foil cover under the cap. Without realizing it, a piece of foil broke off, and when I poured the fluid, a piece of foil went in. Now, I cut and peel the foil.

@jhonditch4269 Год назад

it is ok those who like to engine repairs or replacement say do not change your ways

@gregoryheim9781 Год назад

And what happened? What monumental disaster befell that engine from that itty-bitty piece of foil? (Ya know, not every piece of debris that gets into an engine is the end of the world.)

@DustinDoesStuff Год назад

@@gregoryheim9781 If it's a small piece, it will get sucked into the oil pump, it may or may not damage the oil pump on it's way to the oil filter. If it's a big enough piece, it'll get caught by the pick up screen and starve the oil pump of oil. Either way, it's never good for foreign debris to fall into the crank case.

@calvinevans8305 Год назад

It's one of those things that bug me when I open those bottles. I poke them open and peel back the foil and plastic before pouring it.

@MrSpartanicus Год назад

I just got a funnel that has a piercer and a filter screen.

@ryans413 Год назад

Troy not knowing Face Off or who Jon Travolta was just made my day lol

@rafirafilandzki8354 Год назад

in my country it was done with kerosene and it worked, I wonder what the difference is in the effectiveness of the new will to the old solutions.

@eaglerider1826 Год назад

You are correct . 30 years ago we also used kerosene here .

@bryanfiftycal Год назад

67 year old mechanic. Back in the day we would put a quart or two of Ford ATF in the crankcase. It did a wonderful job cleaning push rods and eliminating sticky hydraulic lifters. I bought a used 76 Blazer in Alaska. When I got it the engine would clack at 50F for about 15 or twenty minutes. That's how bad the sludge was. After two oil changes with 2 quarts of ATF and Mobil One synthetic the engine would not make a sound at -40F. ATF is designed for tremendous pressure and long life so if you aren't racing during the cleaning cycle it does a really great job. Love your channel and your integrity.

@bryanfiftycal Год назад

That was supposed to read "not make a sound at -40F

@domfer2540 Год назад

Just think, we did not have those expensive additives when growing up, we used kerosene.

@derekhobbs1102 Год назад

Kerosene is now really expensive in Australia.

@pcspecialistpdx Год назад

a lot of us used ATF and #2 diesel (though #1 would have been better).

@colinm1325 Год назад

Hey Dom, does that work in Diesel engines also? Thanks

@Casmige 10 месяцев назад

B12 chemtool….by the gallon.

@ChrisCov79 Год назад

Caster Troy’s oil in the face scream could be a sound bite for when you touch something HOT!

@bryantench1178 Год назад

You should tell Troy when pouring things to turn the spout so that it is top most and the handle of the jug is at the bottom. The liquid will flow nicely without the glug glug effect. Just a suggestion.

@ferrumignis Год назад

It makes it hard to start pouring accurately with the spout at the top as you are that much further from the oil filler or funnel. Holding the jugs sideways is a good compromise IMO.

@COBRO98 Год назад

I was thinking he should teach him when & what gloves to wear not to mention safety glasses.. these chemicals are toxic & many are linked to cancer. You make money with your hands & eyes, always protect them.. I’ve personally witnessed a tech lose eyesight in an eye

@mikec3955 Год назад

if you hold the bottle so the handle is horizontal (sideways), the fluid won't block the hole (Which is what causes the glug-glug)

@ryans413 Год назад

Or you can turn the jug sideways that works too

@dotar9586 Год назад

Was that Troy's first "on air" pouring things?

@SkorpyoTFC Год назад

I've been using those BG kits at work to clear up badly neglected engines and get a conclusive answer on whether or not oil neglect killed them. Seeing the actual results is a real treat.

@gibsonj5035 Год назад

I to was interested in how well the 2 gals of cleaner would perform. I appreciated you removing the valve cover twice so we could actually see the job the cleaner had done. Hope you film the opening of the filters to see what is in them. Excellent video!

@AliasTekTV Год назад

I almost initiated the Pepsi cleaning process on my screen with the deer gif LOL

@jtjones4727 Год назад

I think that's the most love that old Jeep has had in many moons.

@creekdweller9662 Год назад

Any a owner of automobiles, I can’t stress this enough. Change your oil every 3,000 miles. Oil filters do not trap carbon. The percentage of carbon only rises as the miles tick off. And where do they land and cook off but around the piston and oil control rings. Every 3,00 miles keeps the carbon to a minimum as it winds its way through the system. Car makers tell you that every ten thousand Miles is recommended, but keep in mind, they are in the business of selling cars. The cleaner you keep your oil the longer the engine lasts.

@Be__Brave Год назад

Hello everybody good day to you ❤

@mikehunt908 Год назад

Back at you 👌😎

@thomas7770 Год назад

Hello people, please excuse me while I add a quart of oil to my truck, it’s a piece of $hit.

@AquaPeet Год назад

Hey hey! Good day to you too!

@tonybarkdull1199 Год назад

I had a '87 Jeep Comanche that I neglected when I didn't have much money. To clean the engine, I used the Slick50 product and it DID break up the sludge, so much so that the pick up tube was getting blocked. I dropped the pan and is was full of sludge. But the underside of the engine was a beautiful AND clean amber color. Cleaned out the sludge and it ran beautiful after that.

@ronsloan7662 Год назад

Hey Ray and Troy, that was a great video! That Jeep sounded just awful when you pilled it in and after the engine treatment it sounded like it should with no smoke. That stuff really works. Cheers!

@billamick2338 Год назад

Wow I was impressed with the hose replacement that someone did on this auto. Never seen a garden hose cut to be used on the engine and yes I am aware that it was a breather pipe so no pressure appeared to being put on it.

@LionWithTheLamb Год назад

I've seen the garden hose mod on a Dodge Scaravan.

@superchiefusn5601 Год назад

Did Ray reuse it or replace it with the correct hose?

@edifyguy Год назад

Pressure isn't the issue. They can take pressure. Oil vapor is the issue. Many of them absolutely CANNOT handle oil, and will turn to mush. However, the funny part about that is that the cheap vinyl garden hoses will handle it better than the expensive rubber ones. :)

@c_red-derb Год назад

Ray has given me the inspiration to get back to automotive work. I did miss it.

@mikeh6876 Год назад

Interesting video. Lots of work. Hope the "burns" heal quickly. Quick note: if you had sprayed the inside of the valve cover with Purple Power and let it set for a while, all of the grime/grit would have come out much easier.

@shamanosarcasm9800 Год назад

I've used Purple Power full strength on a Subaru and Nissan valve cover and it got off all but the worst baked on varnished oil. I even used it on a rag to wipe the internals under the cover to remove baked on oil residue

@mikeh6876 Год назад

@@shamanosarcasm9800 I have a K&N Air Filter and clean it about twice a year. I soak it in the PP and it lifts off all of the dirt and oil. Then I rinse and soak in a mild Dawn and water solution then rinse, dry and reapply K&N oil. Always looks almost like new.

@JW-xn9fj Год назад

An old lad in the workshop I started out in many years ago used to dribble brake fluid down the carburettor air intake to “free stuck piston rings” and clean out “all the ****”!!!

@mikep3509 Год назад

A pedestal-mounted bench grinder with a wire wheel installed makes quick work of the cork gasket. It’s also great for cleaning up the threads on crusty bolts.

@ranger178 Год назад

i use my bench grinder wire wheel constantly it is great for rust removal

@sparksalot4950 Год назад

Gosh Ray, red rags galore and a bonus fender cover, now that's 1st class !!!!!

@chinbin2006 Год назад

Ray, why do you not have a parts washer? It must be more cost-effective than using brake cleaner, plus using the brush will mechanically help remove the gunge.

@rickgalla3377 Год назад

Great question

@sparksalot4950 Год назад

He does, name's Troy !😊

@desotosky1372 Год назад

Has one. He commented before it failed. Question is..... did he or is he going to fix it.

@robertpayne6960 Год назад

I've been internally screaming this to myself almost every video... a little actual rubbing with a rag/ carts cleaner brush goes a long way with the final clean up rinse with brake clean. I know Ray has his "Stich" with the whole "shiny" but it really aint all that clean just blasting a whole can at it in one go.

@kevinmurphy3464 Год назад

Proof that you should service your oil and filter every 5,000 miles since it’s just such cheap insurance for your motor. The guy is lucky it’s a 4.0 boat anchor which are hard to kill even when neglected. Reminds me of the 7.3 Powerstroke. I have never even heard of this type of cleaning system that Ray used. I’m interested to see the oil filters on the next video.

@chillvids4009 Год назад

You need a parts washer . A small brush and solvent does way better job than brake cleaner and is way more cost effective . Great video

@forgetfulme1719 Год назад

that is Oscar winning acting moment, throwing farther each time, now he can have a Brakeclean contest with Troy, who is the first to empty a can.

@kasmanien Год назад

Obviously,but then he wouldn't be able to see you get all anxed about it and post these comments. LOL

@CodycoWeb Год назад

He has one in the corner but doesn’t use it

@forgetfulme1719 Год назад

@@CodycoWeb sorry for Troy who will pay dearly to breathe in the BK solvent daily. He tried to cover mouth with a cloth.

@kell8603 Год назад

My dad taught me to use a sharpened metal putty knife for scraping off gaskets. Works pretty well!

@Hankie56 Год назад

I always loved to see the learning curve of my trainees. The more eager they are the faster they learn. Good job Troy 💪

@johnnybigmack1332 Год назад

I love it when a guy is trying to make a quality video in the shop and it seems like it is the day for testing impacts and die grinders😅😅😂😂

@44hawk28 Год назад

Put about a half a quart of transmission fluid in that thing and it will do wonders for the valve guide seals and the pan gasket probably. And it will do the final cleaning of most everything in there. Marvel Mystery Oil works great about a week before an oil change especially in that older style engine. It even works good in the new engines especially things like a 5.4 L Ford that has those small oil passages which operate the cam phaser. As well as the 4.7 and 3.6 others that have the hydraulic valve lash Adjusters.

@hestheMaster Год назад

Awesome seeing you and Troy your Padawan, working together a little more on camera. Not a Jedi yet he is.

@nickinflorida777 Год назад

I am waiting for the day when Ray throws the brake clean car across the shop floor and it lands in the upright and proper manner. That will be a very very good day. Let’s go!

@firstlast7152 Год назад

Any reason to not just do a brief spray of cleaner and then go at the inside of the valve cover with a wire brush? Seems like it'd be the most efficient way to get that carbon buildup off at the end there.

@jc3745 Год назад

While I love the brake cleaner jobs, wouldn't a proper parts washer be more economical for things like valve covers and oil pans?

@Cherokee93 Год назад

Great video and when you got the cables installed you called the cruise control cable the kickdown cable, kickdown cable has that button on it to adjust it

@SpankyCool-ib3pc Год назад

Please never stop throwing those spray cans. True wrench man class. Your #1

@steventsunami9506 Год назад

I love your channel, but I especially love the Jeep XJ videos. I've been wanting to try this with my 88 Wagoneer XJ. Thanks for showing the way!

@DennisDodd-ke7bd 8 месяцев назад

It is a great pleasure to watch a "Professional" mechanic and a truly gifted vehicle technician at work. Ray is worth every penny he makes and then some!!

@hellenahandbasquet Год назад

thoroughly enjoyed this video. good to see you and Troy together working on a vehicle. Can't wait for more. Keep it up!!

@dannass135 Год назад

I wish you guys would have done a compression test prior to and after the process. I'm willing to wager the compression isn't going to be quite as high as it once was...

@andrewr5575 Год назад

that engine is pooched.

@AB-jk7tw Год назад

Great video Ray! Really enjoyed watching the process and how effective the cleaners were.

@kennethknight9911 Год назад

Don't forget the zip tie on the trans cable!!

@kevincurry4735 Год назад

Happy Tuesday Ray. Very excited to see this service as that Jeep is a smoker.

@SqueakyChase Год назад

That young man is getting an invaluable education. Good job Ray.

@robertlacob8831 Год назад

Nice results Ray! Sometimes that works only temporary and sometimes it last a long time. That engine surely wasn't taken care over the years.

@samduty554 Год назад

That was definitely a great video.❤

@thebulltoo2875 Год назад

Can never stop the 4 liter from leaking oil, just slow it down a bit. Impressed with the cleaner.

@billymcloughlin Год назад

Ray, we need a review of the amsoil brake clean. From one dealer to another, it's for science! Haha

@jtjones4727 Год назад

I personally always just buy whatever the cheapest brake parts cleaner I can find. At Walmart you can get the cheap stuff for like $2.99 a can. Since it's going to get used a can at a time pretty fast, it's a tiny bit cheaper. Also, some blends of parts cleaner are not flammable, while most are. Just something else to note if you ever use it as a substitute for starting fluid.

@WildMountainGarage Год назад

We had Cherokees and Grand Cherokees growing up and I keep wanting to get an old one and get distracted by other craigslist junk...then you post this and makes me want one again.

@MikhailScottKy Год назад

If it continues to smoke you might want to check the stem seals. It seems that the 4.0l engine will be a little smoky if those get hardened.

@mikec3955 Год назад

Putty knives work great for Cork Gasket Removal... they're thinner than a screwdriver, and flexible enough to get under the cork.

@joemuncie9187 Год назад

Nice video Ray, as usual. How do you feel about pre-filling vertical oil filters? WRENCHING WITH KENNY and I think that any reduction in "dry run" time is a good thing. I can't imagine any negative side effects, but please weigh in. Thanks.

@maintprofi1077 Год назад

"have some instructions here in case we need 'em"🤣🤣

@michaeljohnson4578 Год назад

The smoke looked white not blue, is that just because of the camera? Keep up the good work!!

@ferrumignis Год назад

When it's oil smoke you only see the blue tint clearly when it disperses out into the air away from the tail pipe.

@dginia Год назад

I love watching you! And while I did not think I would see this again, at 40:00 you again showed us you are out to launch!

@kassemadam3005 Год назад

Im a regular here, but this video will prove to be super useful to me as I likely have sludged up piston rings that is causing a lot of oil smoke to be emitted from my exhaust in my 240sx. Thanks so much for making this! I have already replaced my valve stem seals while rebuilding my engine head (have not touched my core engine internals yet), and ever since the blue smoke issue persisted, I was planning on pulling the engine out and doing a full rebuild. I am wondering if it would be worth to attempt this first. If I have excessive oil burning, how likely is it that it is due to piston rings being really sludged up versus them being too worn (along with cyl walls)? The engine sat for 6 years before I bought the car. Since the bp kit you used is $~300, I am weighing my options.

@voxexquis Год назад

Pull your spark plugs and check for oil residue in the chamber. Get a compression test done and record your numbers. Consider picking up an engine bore scope if you'd like a view inside the block before you tear down your core for a rebuild. If you're working with a ka24de like I think you are and you've rebuilt the head, rings may be gone and looks like you're in for rebuilding the internals with an overhaul kit and having your block tested/machined. A BG service like this will no doubt clean up your rotating assembly but I'm skeptical on whether it'd repair an internal seal by cleaning out buildup and debris. Best of luck to you

@grumpslowenleft9642 Год назад

Done similar with 2 qts oil, 3 qts kerosene, 1500rpm for 15 minutes. Usually do it 3 times, noting the difference in what comes out the drain each time. Works very well, but certainly can't say what you've done here didn't work great as well. Very effective at pulling all the wet sludge and some of the older stuff as well. Tends to REALLY quiet down the valvetrain when completed and worth the effort on a sludgy motor.

@OGYettie Год назад

Gotta love BG products seem to do a really good job.

@ragingbull5883 Год назад

'grab me 1/4 extension. That's 3/8 drive'.' Been on both ends of that convo, you're an AMAZING teacher! Glad to see you running your own show like a champ

@justicecenter Год назад

That straight 6 was one bear of an engine. Wicked good low end torque.

@titaniumman_22 Год назад

Since you guys are now XJ mechanics, I’m bringing mine in from Colorado!

@legionofanon Год назад

Ah yes I love a good scientific process engine cleaning. thanks ray I cant wait to see the results

@chevyboy.0448 Год назад

Garden house fix in the beginning got me 😂

@chaddelong6795 Год назад

This is only the beginning of the adventures of castor Troy and ray and I like it 💪🏻

@mws3779 Год назад

That old AMC derived inline 6 has been a workhorse for decades, and i6's are naturally balanced.👍

@petersomma4407 Год назад

What happened to your fancy oil filter removal tool?

@opendstudio7141 Год назад

New is the keyword. Old habits die hard.

@bradman7110 Год назад

Love the videos. question for you you intro a lot of these jeeps as project vehicles are they your own vehicle or do you like fix them up and get them back on the trails? or maybe to demo some of the BG products. I always like to see proof of products so this one is really cool to me to see the change.

@forgetfulme1719 Год назад

Bought them for the show or Jeep Heaven attract all with ailments to come.

@boogerhead0 Год назад

Exceptionally surprising difference between before and after. Your shop could definitely use a 40-gallon parts washing tank with varsol (mineral spirits) or PSC1000, etc.