Scion FRS/BRZ Coilover Install | BC Racing BR 

Thanx man! Yeah think it was because the oem springs were so much softer.

@@BRock86 completely transform the car. Feels like it's on rails now

I know! Wish I would have done this a long time ago!

Thank you for watching. I have jacked it up from the middle with no issues, but proceed with caution

So after about a week or so you are going to have to re-adjust them anyway because they are going to settle so I recommend setting them about 3/4 in higher than you normally would. I would recommend you also watch my video “we have rubbing issues”

I’m sorry but I never actually got a good base height before I lowered it. On stock wheel and tires you can drop it quite a bit.

@@BRock86 all good thanks man

I think it is set to stock ride height out of the box but it not an exact thing. Your stock suspension has settled over time and the new coilovers will take a couple days or weeks to fully settle in. Once you get dialed in though you don’t really need to mess with them.

These are not the extreme lows. When I first put them on I had the dampening set neutral and they seemed just a little stiffer than stock. Now I have it lowered more and on the front they are max stiff and yeah it’s a pretty hard ride but it handles good and it doesn’t rub lol 👍

Yes you can use the spanner wrenches while the coils are on the car. However it is much easier wile they are outside, so just get them as close as you can before they go in.

Nah ur good, i love the way they ride! If you set the dampening up in the middle it is prob close to the stock stiffness or just a little more

I believe it is around 40ftlb but it is hard to get an accurate torque on those

I left it on the car but unbolted the bottom

Thanx!

They are the regular not the extreme low. I’m sorry I can’t remember the spring rates. I know they are the same front and back

A Craftsman I have had for years

Not sure what you mean

I have the regular BR series not the extreme low www.maperformance.com/products/bc-racing-br-coilovers-subaru-brz-scion-fr-s-13-bc-br-frsbrz

Do you mean how much “higher” from stock?

@@BRock86I am more so interested in how much lower the car sits compared to stock

There are two versions of the BR series. There is the “extreme low” and regular. I have the regular one and you can probably get about 2 1/2 in total drop

B Rock 86 thanks brother! Not looking to slam it to the tarmac but I definitely want something aggressive.

B Rock 86 how is the handling? Is it a much bumpier ride?