Scrap Wood Travel Knife Sheath

Подписаться 551 тыс.

Просмотров 76 тыс.

50% 1

3D End Grain Cutting Board Class: lddy.no/stih
This week’s woodworking build video is wooden knife sheaths for my friends who work at one of my favorite restaurants. These things are made from zebrawood, walnut, wenge and leopardwood. I finished them with wax thread and they came out so cool. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Musicbed SyncID:
MB017AG4MXKRPDH

Хобби

Опубликовано:

19 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@katzmosestools 4 года назад

BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off How to Create a CAD model in Fusion from a picture (NYC CNC): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dUiIAb1YqeM.html

@shanechepren8119 4 года назад

I was kind of hoping you see there reaction when you gave it to them, I am assuming they loved it.

@jewdd1989 4 месяца назад

These are beautiful

@user-fg9kv9lf8w 26 дней назад

lovely,I would add earth magnets to the thicker side,you can even do them from the outside,and do a decorative epoxy

@PeteSudlow 4 года назад

"It's not stupid if it works." - JKM 2019 Best quote ever!

@katzmosestools 4 года назад

Hahahaha thanks bud

@JamesLee-sw6ss 4 года назад

Alec Steele been using the phrase for years.. Even has t-shirts. =P

@mooneyes2k478 4 года назад

Unfortunately, the truth is, it's still stupid. It's just that you got lucky.

@jasonthomas1760 4 года назад

Looks great. About had a heart attack when you used the actual blade as reference for your little hole. Was thinking how lived I'd be if anyone drilled a hole in any of my knives lol

@jessmac1893 4 года назад

Love those Shun Classics. Amazing knives. Easy to hand sharpen and keeps a great edge. I need a couple more to complete my set.

@jessicahughes6964 4 года назад

Omg absolutely beautiful!!!

@_shanek 4 года назад

Small button magnet at the knife point end inside the sheath would be a good way to go, no need for the leather. 👍🏼👍🏼🇦🇺

@itshomelife 4 года назад

Awesome project and gift for your friends.

@Exodus5K 4 года назад

I need to make something like this for my carving knives... maybe mortise a small neodymium magnet on the inside to hold the sheath on. Great Idea Jonathan, well done.

@HyperactiveNeuron 4 года назад

Awesome! I've been wanting to do this for a few of my chef's and other cooking knives. I love the way that walnut looks.

@dan00017 4 года назад

Nice Project, Man! I love the genuine thoughtfulness behind it, and I also love how you don't hide your mistakes with camera cuts, i.e. the small tilt by the Router. Like you always say, man Woodworking isn't about being perfect, it's about knowing how to fix your mistakes, and I always find myself repeating that in my head every time I build something. Thanks for always keeping it real, Jonathan...

@katzmosestools 4 года назад

My guy!

@logans212 4 года назад

Let me first say those sheaths are beautiful. I’m a chef who got into work working through rehandle Japanese knives and making sayas (sheath) for them. Google “saya pins” for a quicker, easier, longer term, and more food safe option of keeping the knife in place.

@Kavik79 4 года назад

Was going to say the exact same thing. Sure, magnets are an option like some people are saying, but they're weak to lateral movement and could wiggle off without much effort. Pins are more traditional, more secure, and ensure you absolutely 100% never get that little bit of the heel poking out where it can bite your finger. I have a few I need to work on handles and sayas for here myself, and it will be pins on all of them, for sure.

@JkCanvas 4 года назад

Genius idea and well done. Always love watching your video's and your projects are super easy to follow.

@don0giorgio 3 года назад

Awesome!

@antilitarded4142 4 года назад

Wow......I was actually thinking about how to make one of these yesterday!!........I came up with the same methods, but im going to add a neo magnet to one side to give it some resistance to falling off........great video!!

@ApexHerbivore 4 года назад

Nice idea :) I don't know that much about knives but before you go thru with it, check how magnetic the knife is, I made a bird feeder with removable stainless steel bowl recently (held in place with magnet) and it barely attracted. Ended up having to epoxy a washer to the base to get it to magnetise.

@katzmosestools 4 года назад

Good idea

@thebullettrain1757 4 года назад

I made a knife block for camping and used magnets. Works great.

@ApexHerbivore 4 года назад

@@thebullettrain1757 Nice! Were the magnets exposed or did you drill holes for them from the rear? If so I'm just wondering how much material you can magnetize thru?

@thebullettrain1757 4 года назад

@@ApexHerbivore I had a scrap piece of cedar 4*4 that I cut opposite sides off of, routed out the knife shapes in the middle piece, drilled a pocket for the magnets along the spine of each knife pocket, glued the magnets in, glued the sides back on. One magnet per knife. I have to shake it pretty hard to get the knives to fall out.

@shreytheawesomeguy2000 3 года назад

need me some friends like this

@BradsWorkbench 4 года назад

Where can i get some of the "dont worry its food safe finish?" 😂

@katzmosestools 4 года назад

At the, "know it all commenter depot."

@BradsWorkbench 4 года назад

@@katzmosestools lmfao 👍

@paulmurphy4277 4 года назад

Awesome project. Love watching your videos.

@samuelroberts334 4 года назад

Super cool!!!

@Nathan_calisthenics 2 года назад

I love that you have a custom holder on your apron for you combination squared

@c.mikelongo6628 4 года назад

As always, awesome.

@lifeofbrian9695 4 года назад

Awesome video. I need to make myself some of these for my work knives. I love shun and they are my favorite cause of the weight so I can cut all day and not get fatigued from the heavier knives. Was thinking of making a wood knife case since my bag is ripping and I need to replace it.

@myhoneyshandmade1077 Год назад

Great build. Thanks for sharing

@FredMcIntyre 4 года назад

Those look amazing Jonathan! 😍👌🏻👍🏻👊🏻

@JNDCreations 4 года назад

Dude they are awesome! I made a knife block from salmon gum in a similar fashion. Love it!

@ThisIsHowIMadeIt 4 года назад

Great one!!

@GeneralShermanMake 4 года назад

Amazing! As always)

@alexsolarespee4798 4 года назад

Dude those are badass

@simonboyden7868 4 года назад

Very cool

@AZ-Patriot 4 года назад

Very nice Saya, JKM. You can also make them a bit longer at the heel of the blade so you can use a peg to keep them in place. Then attach said peg to the body of the saya with a cord of some sort so you don't lose it when the knife isn't in there.

@MultiTom1956 4 года назад

Katz , that looks beautiful 😊😊

@themoment23 8 месяцев назад

Ohhh I wish you were in my country. I want one so badly 😢

@nafitron 4 года назад

AH BUMMER!! I wanted to see their reaction when you returned the knives...

@trystanmentoor4740 4 года назад

Such an awesome video! They are going to send their knives back to get matching grain handles aswell

@katzmosestools 4 года назад

Hahaha that would be awesome!

@stevenhooper6069 4 года назад

Killer video. Keep up the great work!

@ApexHerbivore 4 года назад

Really nice looking sheaths! :)

@djcline640 4 года назад

awesome work

@BazzleBee 4 года назад

Another amazing video, keep up the amazing work. I would just like to take a second, to say thank you for being one of the influencers in my life that have got me inspired start woodworking. Looking forwarding to buying one of your dovetail jigs.

@katzmosestools 4 года назад

Wow that's awesome to hear my friend! Go get'em tiger!

@louiswarmoth7354 4 года назад

Meaning what exactly...that if he can do it anybody can ? Kidding. The video inspired me too.

@mountainviewturning5319 4 года назад

Great looking knife

@mrizzo3646 4 года назад

Mountain View Turning Shun cutlery for Christmas please...already on my list.

@overproofsb 4 года назад

These came out so nice. Great video!

@katzmosestools 4 года назад

Glad you like them bud! Was a lot of fun.

@johnw2226 2 года назад

Man I'd love some of that drop to enlay in a red oak sheath I want to do... that zebra was crazy

@GregsGarage 4 года назад

Those look a helluva lot better than a towel and rubber band!

@katzmosestools 4 года назад

Hahaha so true

@tbrew8222 2 года назад

Everyone is saying magnet magnet magnet, but it wont work with a lot of stainless metals. I am a fan of waxed hemp. I use it for many things. Ive done a few wrapped tethers like that too and people love them. I wouldnt do it on a belt knife, as you want quick acess. However a magnet button on a handle strap would work as well as a snap. Being a handle or a hilt (like this one) strap, it would not care if the knife is stainless or carbon. I like the wrap on this though. Good balance of thick and thin. Id say that twine is 20lb, and just once or twice over the heel of the blade would hold it plenty good for a kitchen knife transport. Any heavier and you risk busting the sheath, rather than the string. Good choices. I might use zebra wood for my next knife handle, and make it a matching sheath. I like that grain.

4 года назад

very nice. great video👏🧿

@baltimoreace 4 года назад

they came out great, i think ill make some for when i take my chef knife car camping. By the way your stop block is really really great.

@katzmosestools 4 года назад

Thanks bud!

@canidsong 2 года назад

I enjoyed this. I need to make koshirae for a couple swords and while I have grown to hate carving/fitting them by hand I recently started working for a company who owns a large cnc router table and I hope to talk them into allowing me to use it.

@crmcbrideww 4 года назад

Give them a suprise invoice too!!

@katzmosestools 4 года назад

That's not very friendly hahaha

@ApexHerbivore 4 года назад

lol

@crmcbrideww 4 года назад

@@katzmosestools this is why I don't offer the "Friends and Family discounts". Owning a business is hard and if anyone should pay you your worth, it's your friends and family.

@dan00017 4 года назад

@@crmcbrideww I always think it's nice for Friends and Family to reap the benefits of your skills. It's a cool community type thing in my opinion. But I guess that's why I'm always broke lol

@chm1701 4 года назад

Someone said they’d sue you over the Goo video? Holy hell. Only in America indeed. Great video and such a fantastic result. Nice work my good man 👌

@katzmosestools 4 года назад

Said I could get sued and I should remove the video. Was trying to be helpful but was very far off base.

@Kavik79 4 года назад

@@katzmosestools what the hell could you possibly get sued for in that?? That's isane, people have been using that type of finish for ages. Nothing harmful about it, and if you're working in a professional environment where liability is an actual thing, you shouldn't be getting your information from RU-vid in the first place 🙄 Freaking people nowadays.....

@donvanco3078 4 года назад

Was hoping for a "reaction" video - but I can only imagine they were thrilled.

@jameswakim5863 4 года назад

Very cool! As many others say, it would have bee nice to see the reactions at the new sheaths. I'm assuming though that the recipients did not want to be on video? Also, contrary to almost every one else, I really like the "leather wrap" lock. The only reason there would be to use a magnet in the sheath was if the knife is being put in and pulled out of the sheath constantly all day long rather than just being used for transport like I'm guessing these sheaths will be used for.

@bertmorenstein3000 4 года назад

Nice job, they look great. One thinbg about magnets is that stainless steel knives may not have enough attraction to work well. Japanese knives have used wooden sheathesor 'sayas' for centuries. They use ho wood which is similar to poplar. Light and straight grained wood that is soft and won't damage very delicate edges. Instead of a tie, the edge side of the saya extends past the choil and sits just below the handle. It is held in place with a bamboo peg that prevents the knives from sliding out. It is the simplest and cheapest solution. And they don't finish the wood. They rely on wood's natural property oif not harboring bacteria for very long

@ericjustice7661 2 года назад

I had heart palpitations when he said "we need to drill a hole through each knife." glad he meant on the sheaths. I would never bring my knives back to him for sharpening again lol.

@spencerbass7142 4 года назад

Good video.

@truongngo3418 4 года назад

👌 good

@bigscreenbird8198 4 года назад

Damnit I wanted a reveal! Would’ve been really cool.

@gustavoespinoza9834 4 года назад

Is not stupid if it works !! 🤣🤣🤣🤣 Those came out awesome!

@ejd53 3 года назад

The name you're looking for is Saya, and sealing the inside is not necessary. Traditionally they are cut with chisels and they are kept in the saya by a wooden pin, not twine.

@JASinIL2006 17 часов назад

I have made a number of saya (sheaths) for my Japanese chef knives. Yours are very nice. I never finish the inside, though, for two reasons. First, if any moisture gets inside, I want the wood to wick it away from the blade; this is especially true for reactive, carbon steel knifes. Second, I don’t want a knife rubbing against a finished surface every time I slide it in or out of the saya. Finally, no self-respecting chef is going to put a dirty knife into a saya. If they do, they deserve whatever happens.

@MJ-nb1qn 4 года назад

When I worked in a restaurant the chef was super picky about his knives. No one touched them and only HE would sharpen them. I guess these folks trust you a lot or they are not as fussy as this chef was. Thanks. Great idea.

@KyleBruns 4 года назад

You had me at dovetail sushi.

@Whatthensayyou 4 года назад

Glad to know I wasn't the only one thinking the same exact thing!

@jeremyfisher8393 4 года назад

Using magnets to hold the knife in the sheath would be cool.

@johnritchie3889 4 года назад

Would a tiny rare earth magnet down near the tip hold the knives in? I’m thinking bore a hole inside the sheath and glue it in before you finish the inside.

@chriss4176 4 года назад

Instead of the string, which looks very cool btw, what about sinking a rare earth magnet into the thicker side of the sheath at the tip to hold it in place on the blade?

@tilmanbauer5728 4 года назад

They look gorgeous, nice video! Is Wenge a good choice though? It’s allergenic and the dust is toxic, so when the knife scrapes some material off on the inside... is that something you worry about?

@AlainPilon 4 года назад

I think you should have put a magnet inside to hold the blade in. But it would have made the sheath a bit thicker... Anyways, great project and I am sure your friends will be happy!

@ClaytonwFirth 4 года назад

Ok... going to stop right at the beginning... WTF! What kind of chef doesn’t sharpen their own knives? That was one of the first things I was taught when I started! Edit: The sleeves came out brilliantly. I’ve still got friends in the industry, I think I know what they’re getting for Christmas.

@MJ-nb1qn 4 года назад

I was wondering about the chef not sharpening their own knife also. Unless he really changed the bevel on a Tormek?

@Nunnikins 4 года назад

Great video! Came out great. Be sure to let us know how your friends react to the sheaths!

@katzmosestools 4 года назад

They were happy!

@dmcarstensen 4 года назад

Epoxying a small neodymium magnet inside would keep the knife solidly in there I'm thinking.

@TradChadFarm 4 года назад

Put a magnet in the sheath to hold the knife. Would that be a good idea?

@trakman14 3 года назад

How did you deal with squeeze out of glue on the inside of the sheath?

@charlesowens4864 Год назад

Nice! So did you find that it’s perfectly fine to only route one side? I’m asking because I saw you ended up routing on both sides once you tried the CNC machine. Thank you for the video!

@katzmosestools Год назад

Yeah its fine

@adloco24 3 года назад

Hey Jonathan! My former chef is a chef at the Lark in Santa Barbara. Would you mind making some for a few of my knives and I’ll buy them off you. I’m looking to support the people who support my people!

@katzmosestools 3 года назад

I don't do commission work and this was just a fun build for a friend. Definitely a great beginner project if you want to try to tackle. Cheers

@BiggMo 4 года назад

I noticed your push blocks slipping on your jointer. Depending the brand, to reduce slipping I’ll either wipe the pads with denatured alcohol to enhance the stickiness or using a razor knife I’ll cut slits in the pad - acts like the sypes cut into winter tires.

@tallrau 4 года назад

You ever go to Finney's craft house in Santa Barbara? If not you need to check it out.

@katzmosestools 4 года назад

Was there last night. Love Finney's

@arnaldomapelli7776 4 года назад

What is the name of the software you use to measure the knifes?

@orelygarcia 4 года назад

💖💯😎👍👍

@friedoompa-loompa2876 Год назад

Those look really amazing, but the leopard wood colour value (b&w) is to dark for a dark thread.

@JeffGloverArts 4 года назад

ANOTHER project to try! Thanks! BTW, do you have a video on how you sharpened the knives? I NEED that!

@shaines 4 года назад

Check out #burrfection, he has a ton of kitchen knife sharpening videos.

@katzmosestools 4 года назад

Yeah what the other guy said. There's probably people better than me at sharpening knifes

@JeffGloverArts 4 года назад

@@shaines , Thanks, fellas!

@JeffGloverArts 4 года назад

@@katzmosestools , you're too modest, but I will check out #burrfection

@DonsWoodies 4 года назад

Way cool. very nice of you to make them for your buddy. One thing - the way you waved that knife around made me cringe waiting for you to slice off a piece of finger. Maybe it's just the camera angle but dang that looked close a few times. You talk with your hands like my wife. If I held her hands still her head would catch fire. LOL.

@jaycook3902 2 года назад

Well what did your friends say did they like it

@josemanuelloarca9114 Год назад

Do you sell these? Or take custom orders?

@shaines 4 года назад

Question, does it help the content provider to have comments? More to the point, I’ll be sure to leave comments if it is beneficial to you. Steve

@katzmosestools 4 года назад

It definitely does. Thanks bud!

@randomconsumer4494 4 года назад

SCRAP WOOD CHALLENGE, SCRAP WOOD CHALLENGE. it's scrap, it's crap, it's firewood, BUT SOME OF THE WOOD IS GOOD!

@allenwhittenbury5800 7 месяцев назад

I love this but let's be honest, that's not scrap wood, it's offcuts. I wish I had scrap wood with that quality lol 😂

@ironwood1621 4 года назад

How did they feel about you drilling holes in their knives? My daughter is a chef and spends thousands on her knives.

@chrissteere9494 4 года назад

Dude, did you watch the video??? No holes in the knives, just in the sheath... then wrapped the cord around the handles.

@ironwood1621 4 года назад

Chris Steere guess I didn’t watch the whole video. My bad.

@shadowx8405 2 года назад

I didn't know Jimmy Kimmel had a woodworking channel on RU-vid. 😏

@trick58 4 года назад

Liked this idea, then lost me with the CNC. Not sure why craftspeople call it hand made. IT:S A MACHINE.

@drhardin51 4 года назад

gee, the bandsaw is a machine, and the router, and the table saw, and... and... and...

@autumngrace3135 4 года назад

@@drhardin51 It's the computerized labor...

@raighteye 4 года назад

No reaction??? Me sad

@bloodgain 4 года назад

Sued? For what? Food grade mineral oil and beeswax is exactly what commercial cutting board goo like Boos Board Cream and Howard Cutting Board Conditioner are made from.

@katzmosestools 4 года назад

Agreed 100

@pusmeongmeong5200 4 года назад

your sheath are expensive.. I just made few sheath kind of that by using hand tools only.. 🤭😊😊😊

@katzmosestools 4 года назад

You're the best!

@ljttlebro3534 4 года назад

I could do this job with a blunt chisel and the wrong hammer

@jameswakim5863 4 года назад

As they say, "There is more than one way to skin a cat." If you want to use a blunt chisel and sledgehammer, that is you prerogative. I'm sure Katz-Moses would love to see you post a video of your technique.