In this video I make a bowl from the first pattern in Carole Rothman's book "Scroll Saw Wooden Bowls". She made hers from aspen but I used inexpensive pine construction material. I wanted this to be a practice or learning project and I did not have any 3/4 inch aspen. It came out better than I expected although I did drill the entry holes incorrectly and left a gouge in two of the rings on the outside. I did it again and drilled the holes with a drill press and did much better but did get one hole off and left a small groove on the inside of the bowl. But, that is why I call these practice bowls. I hope practice makes perfect. But I did follow here procedures and got the hang of the process. The angles lined up almost perfectly and made them easy to sand and finish.
Here are links to the book and the tools that I have purchased.
Link to book:
amzn.to/48D0NxB
Flex pad sander and discs:
amzn.to/3S7sadV
Sanding sleeves for inflatable sander:
amzn.to/4aLRsFo
Inlatable sander:
amzn.to/3S3FmQT
Affiliate links to the things I use in the lay out of my spinners
compass (not the same as mine as it is not available anymore, but I like this one)
amzn.to/3LVcYNl
30 60 90 ruler
amzn.to/46JFyct
45 45 90 ruler
amzn.to/3PStOxq
swivel hooks
amzn.to/3Qduf77
amzn.to/3FRIAQE
Some of my favorite pattern books
classic fretwork patterns
amzn.to/3PT7fsJ
custom boxes
amzn.to/3ROJt3B
gear clocks
amzn.to/45rXxDl
gizmos and gadgets
amzn.to/3FnoBJ5
29 авг 2024
