This is the next project bowl in the book by Carole Rothman "Scroll Saw Wooden Bowls". It is a square bowl with rounded corners. I used all scrap pieces from my shop to make the blank both 3/4 and 1/4 thick material with the 1/4 layered to make a 3/4 piece. I liked way it looks. I moved up to a number seven blade and a 1.6 mm drill bit to avoid the blade flexing in the thick cut. It left me a little more sanding to remove the drill marks than I like. I will go through my bits and find a slightly smaller bit as this bit made a little larger hole than I needed for the blade.
Blade and drill bit info links
www.bearwood.com/scroll-saw-b...
www.bearwood.com/drill-bits.html
mikesworkshop.com/collections...
Here are links to the book and the tools that I have purchased.
Link to book:
amzn.to/48D0NxB
Flex pad sander and discs:
amzn.to/3S7sadV
Sanding sleeves for inflatable sander:
amzn.to/4aLRsFo
Inflatable sander:
amzn.to/3S3FmQT
Affiliate links to the things I use in the lay out of my spinners
compass (not the same as mine as it is not available anymore, but I like this one)
amzn.to/3LVcYNl
30 60 90 ruler
amzn.to/46JFyct
45 45 90 ruler
amzn.to/3PStOxq
swivel hooks
amzn.to/3Qduf77
amzn.to/3FRIAQE
Some of my favorite pattern books
classic fretwork patterns
amzn.to/3PT7fsJ
custom boxes
amzn.to/3ROJt3B
gear clocks
amzn.to/45rXxDl
gizmos and gadgets
amzn.to/3FnoBJ5
6 фев 2024
