Blade and drill bit info links
www.bearwood.c...
www.bearwood.c...
mikesworkshop....
Here are links to the book and the tools that I have purchased.
Link to book:
amzn.to/48D0NxB
Flex pad sander and discs:
amzn.to/3S7sadV
Sanding sleeves for inflatable sander:
amzn.to/4aLRsFo
Inflatable sander:
amzn.to/3S3FmQT
Affiliate links to the things I use in the lay out of my spinners
compass (not the same as mine as it is not available anymore, but I like this one)
amzn.to/3LVcYNl
30 60 90 ruler
amzn.to/46JFyct
45 45 90 ruler
amzn.to/3PStOxq
swivel hooks
amzn.to/3Qduf77
amzn.to/3FRIAQE
Some of my favorite pattern books
classic fretwork patterns
amzn.to/3PT7fsJ
custom boxes
amzn.to/3ROJt3B
gear clocks
amzn.to/45rXxDl
gizmos and gadgets
amzn.to/3FnoBJ5
scroll saw box patterns
amzn.to/44sYQTt
This week I have been behind on everything and mainly video making and woodworking. With a holiday and heavy mowing to do due to heavy rains this spring and lawn mower problems I have been playing catchup for days. I started this box last week to replace the last one I sold at the consignment shop so I jumped in the middle of the project to make a video with it. Again, I am making the blank from various scraps of 3/4 in pieces. Every time I do one of these it is different. I used pegs to attach the lid, I make most of them that way but sometimes use a magnet in conjuction with a swivel peg. I cut the shape out of the blank in one piece. I intended to cut the bottom off with the table saw, use a large hole saw to make the cavity of the box and use some 1/4 inch cedar for the lid. However, when I put it on the table saw I cut the top instead of the bottom. So, I cut both top and bottom and cut the cavity with the scroll saw. I like the way the lid matches the box and may do this from now on. I sanded it all with a flexible pad sander and finished it with spray poly.
9 сен 2024
