SeaDoo 2008 RXT Jetski 12v Low Voltage Alert how to fix Best 5 minutes

Подписаться 454

Просмотров 60 тыс.

50% 1

Are you getting the jetski 12 volt low voltage alert? Take 5 minutes watch this video save hundreds of dollars and give me a thumbs up. 2008 RXT 215 model. When you test the resistance on the yellow wires on the rectifier make sure the engine is not running the resistance should be less than .8 ohms.. my reading was at .3 and .4. When you test for ac voltage from those yellow wires the engine has to be running to see approximately 20vAC and when you check where the red and black wire connect to the rectifier the engine needs to be running to see the 15 volts coming out of the rectifier. Make sure to plug in your hose to keep the engine cool while testing out of the water.

Развлечения

Опубликовано:

14 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@davidcalderon7595 25 дней назад

This video sent me right to the problem with both wires, did the fix and all seems great. THANK YOU SO MUCH!!😊

@keithbegun3763 3 года назад

You know what your talking about but it would be helpful to know which tests require the engine to be running and when it should be off. Thanks for help.

@kennyc6286 Месяц назад

THANK YOU this was EXACTLY what I needed to do to fix this on mine, I bought a new battery when it probably didn't need it, well there was no marking on battery so I assumed it was that, then since I have a 215 and a 255 both 2008 I tried swaping voltage regulators around with no luck. I came across your video went thru the trouble shooting because I did not want to pull the pto cover apart for a stator. Sure enough new wire to the same location fixed it. 👍👍👍 (I do believe that this 255 has seen sea water at one point it has corrosion on all hardware which I can see why that wire got corroded while the 215 being the same year has only seen lakes and has no corrosion on anything inside)

@shin11700 3 года назад

Excellent explanation. Thank you for taking the time.

@arjunaugarow 3 года назад

Awesome video. Top notch info and explanation

@kimjong-illest4735 2 года назад

Thanks for this. It's basically the same procedure for 2006 and older however the fuseboxes and location are a bit different. Mine was the fuse

@pjdardis 4 года назад

Great video was my problem exactly!!!!

@davidfischer1006 3 года назад

Thankfully, the screw holding the positive battery wire was loose. I tightened it and no more 12 v low or any other problems.

@kelvinlyons3401 4 года назад

Thank you..

@jamesbruzgis9476 2 года назад

Thanks!

@TheConradiii 6 лет назад

Great video....thank you-thank you Needed this today

@daringrey 6 лет назад

TheConradiii glad to help please feel free to let us know what your particular issue was either the fuse or the wiring or the rectifier

@TheConradiii 6 лет назад

Darin Grey hopefully I will find out tomorrow -I am new to jet skis -just got ski in water today and it started right up but then only went slow-12v low came up on screen and red light- when I stared and ran it on shore it was fine - revved up and all but not today in water-upsetting- will breakout meter tomorrow and start testing - brand new battery-old battery was dead- bought new cheap one that didn’t work then bought good batt and thought I was good to go then this- I did do something bad while trying to get 1st battery working- I jump started with high output charger and probably blew something- hoping only fuse but doubt it- any quick thoughts what went ?

@daringrey 6 лет назад

TheConradiii the quickest route is just pop out the charge 30 amp fuse and test the top of the fuse clip to make sure you're getting the 15-plus volts DC and then put a voltmeter on the bottom fuse clip and you'll see you're getting 12 volts from the battery plug that fuse back in and then test the battery directly on these things it's usually the wiring but it might be the rectifier as well when I was getting 15 volts I was not revving it up at all and when the battery was attached I was getting 13.5 average when it was on idle

@TheConradiii 6 лет назад

Darin Grey ok, is the fuse a car type 30 amp?

@daringrey 6 лет назад

TheConradiii 30amp mini blade car fuse.... not the 30amp standard blade

@circaindustries173 3 года назад

i agree with Kevin. around a minute into this you're talking about AC voltage from the rectifier. the motor has to be running for the AC current to be read. If I'm wrong, I need to watch a basic video about AC generation. Please respond. Thanks

@KIWI_ADVENTURES 4 года назад

Darin, great video, i believe i have the same issue but my fuse got melted and the wire coming from the fuse plug seems to be burned out also, do you think that i could bypass it with an external fuse?

@AaronS11979 Год назад

This is a widespread problem. This repair should be done even if you don't have a problem yet as it's just a matter of time. Good news for me though, just bought a cheap 08 RXT with "a fuse problem" that he couldn't figure out. Did the same repair and she's back on the water now for +$0.

@carlossantiago6577 3 года назад

Do you have to give 15 volt on the 3 yellow cables with the engine on? Help please

@miguelramos1684 16 дней назад

I put a after market recitifer. And the jet ski is shutting off. What could be the problem. The cluster gage goes crazy

@lazmartinez1605 3 года назад

Good information but I would have held more if you would have shown with the voltage meter how you did it.but still a good video

@rafaelgaud1264 3 года назад

My gauge shows 12v when I turn it on is that the problem also on my GSX 97 Seadoo

@nemonespider 2 года назад

What are the black wires coming from the battery going?

@benschroeder1161 Год назад

I have I have a 2006 seadoo gtx and there’s 2 30amp fuses but every side of each fuse and giving me 12.83 volts and even when I charge the battery and test just the voltage it reads the same thing

@bcsmallengines1874 Год назад

When testing the yellow wires for ohms does the machine need to be running or no ?

@MrMax141 Год назад

So I have 22v AC going into my rectifier and 0v DC coming out I have already replaced the rectifier once please help

@bcsmallengines1874 Год назад

So if I test the yellow wires and get no reading whatsoever does that mean my stator is shot ? And does the machine have to be running for this test ?

@RacerJB243 4 года назад

Darin appreciate that information if tops sensor was replaced and still getting p1502 and low voltage pop up what could the issue be ?

@daringrey 4 года назад

Take a voltmeter and test where the line voltage drops... If you're not getting 14 v at the battery while the jet ski is running then it could be a broken wire connection

@bobreichel 4 года назад

I've got a SEADOO GTX 4-TEC I was getting 12v low I found a fuse was missing. My setup is different then yours is. But after I put the fuse in I got a check engine. I took it to a mechanic as I needed the codes cleared. Crud cost me 170.00 for that and he said 4 fuses were bad. They were good though when I checked them before taking it in to them. Anyway now I'm getting a 12v hi any idea why. I did replace the rectifier so that's new. Any help would be appreciated.

@daringrey 4 года назад

I'd get a voltmeter first and follow the wiring to see where the high voltage is coming from. If you got a knock off rectifier that could be the issue and that should be the only thing causing the high voltage. If you see the voltage coming out of the rectifier being crazy voltage above 14-15volts if I remember correctly...then it might just be a bad rectifier. If the voltage of the rectifier is correct somewhere around 14-15 volts ...then it might be a computer issue. I know there are a lot of aftermarket rectifiers out there so it could just be an issue with that and hopefully not your computer. So basically check the voltage going into the rectifier and coming out of the rectifier.

@arupadupe24 11 месяцев назад

Will this fix a fault code 2161?

@djknowledge1234 5 лет назад

I tested the yellow plug in Ac current but i am not getting a reading. I am getting 12.66 from the DC. What else can i check

@djknowledge1234 5 лет назад

my fuse both show 12.53v but both other pin show.05

@boryslavboronylo4407 4 года назад

Nice guide ! Is that safe for sea doo to run it without rectifier connected to check voltage ? And since there are 3 same yellow wires, which one to check ? Thank You

@daringrey 4 года назад

Without the rectifier it won't charge the battery so it's okay. The outgoing should be the DC volts and the incoming three wires should be checked by checking wires 1 and 3... then 1 and 2..then 2 and 3.. review the video again I did it a long time ago and don't remember the exact voltage

@daringrey 4 года назад

Remember yellow wires are AC not DC.. MAKE SURE VOLTMETER is setup right

@unitedauto7884 4 года назад

Me pueden ayudar mi jet esky no tiene polo a tirar y esta muerto el sistema eléctrico

@nemonespider 2 года назад

I have the same bike but I’m not getting any beeps when I put the key on the ignition…. Any clue where I should start my search

@daringrey 2 года назад

With a voltmeter make sure you're getting more than 12 volts where the 2 30 amp fuses are. Make sure the key is properly seated but I just had this issue of no beeps probably a month ago and it was a bad wire corroded again going to the 30 amp fuses test one side and then test the other side. If you're not getting more than 12 volts then you have a bad wire connection to the battery. If you're not sure where it is let me know and I'll try to take a picture this weekend . And make sure the 30 amp fuses are not blown of course

@nemonespider 2 года назад

@@daringrey I think I know the 2 30 amp fuse your talking about, mine actually burnt out and the fuse connector.. I bought 2 waterproof fuse holder and ran the wire directly to the solenoid