2007 Seadoos RXT Will Not Start No Beep Here is how I fixed it 

Your video just helped me fix the same problem I was having with my RXT! Thank you very much for posting.

Mine has sat here 9 months with same issue. Saw this video today and bam I fixed it. Jumped wire from fuse to fuse and it turned right on. Thanks!!! Great video

On vacation next week. Glad I found your video. This fixed my 2014 seadoo 155 GTX.

Thanx for sharing!! Happy wave riding, Mr. Henry

Thank you!! I was looking everywhere but couldn't find the issuing mine. This was it 👌🏼

this was super helpful. i have had this issue twice now on my 2004 Rxp, and it fixed it both times. Appreciate the video!

Thank you so much for taking the time to make this video. Super helpful.

I'm fixing a flooded boat that sat for a while. Replaced the ECU and had the no starting issue. Had to replace every single fuse because they were all corroded. It started right up. Thanks 👍

I have same issue...heading down to Palm Beach Gardens to hopefully fix the issue. Thanks for posting. Grod work!

Thanks for the Video. I had the same problem and I fixed it thanks to your video.

Thank you sooooo much for the video, my sea Doo had the same exact problem and this video saved me 💵.

Great job and helpful information, thank you.

Thank you so much for your help. This video helped me to fixed my 2019 wake 230 pro

Thank you, thank you, thank you thank you. I've been troubleshooting this for days.

FYI its better to use a meter and look for 12v dc power. I also wiggled the 2 power wires going to relay and you could hear relay clicking on and off. Thanks for putting this video together.

I have a twin challenger seadoo. Only one of my engines would fire. This gives me something to go on thanks!

Thank you and bless you

Thanks for sharing this! That was exactly what the problem was with my Seaadoo!

Thanks for sharing!

Thank you very much!! I had same issue on my RXT.

Helped me It was exactly this prob on mine Just fixed it

Luv to know where you got the AC from! I'm sure you should be talking DC voltage

How did you reconnect the wire to the same connector? What did you use to make the connection from the small wire to the big wire?

Thank you!

96 Sea-Doo 5amp fuse keeps blowing, just changed starter relay ? Any suggestions

The wire you cut did you connect it to the positive side of the solenoid? Or did you cut it then re ran it to the same connector?

Hey. I know this video is old but if you still read the comments I would really appreciate an answer. So when you said the red wire had corrosion, did you just clean it off or something? Or did you have to buy a new one and replace it??

Those red signal wires engauges that relay that powers it up. Good job just bypassing that corrosion

I have the same issue. The thing I can't figure out is where the corroded off wire goes on the back of this block that holds the relay and fuses. I can't see where the wire rotted off from. Any ideas ??

I have a pair of "08 SeaDoo, I'm guessing RXT215s. I do have beeping w/ the key. When I press the start button, there seems to be noise at the solenoid area on this video, but it doesnt crank. Any ideas out there?

That solid sensor to the right of the fuse box, what is that? I’ve always tried to figure it out

Thanks for sharing. I have a 96 gti that doesn’t make any noise when I put in my key. Doesn’t want to start

I’m confused as to what exactly the issue was and what you did to fix it

I have a 2012 GTI 130 that went to start it but only has 1 beep. Not 2. Any ideas what this could be?? Btw; brand new battery. Thx

How about if you get a B-1655 lock out code? And how do you clear the code? (2005 GTX)

Merci, j'ai eu le même problème. 😊 Les 2 petits fil rouge coupé à l'intérieur du gros caoutchouc rouge. il faut le couper avec un cutter pour s'en apercevoir 😩

That’s DC voltage at that point. Not AC. The AC is before the rectified. Not after

i have the same problem, but i have power on both fuses. any other help would be appreciated

How about if you get a B-1655 lock out code?

Great video, I have the same exact seadoo and need help. My steering wheel cable got disconnected from steering wheel unit. It’s held in place via screw. Has anyone else dealt with this problem? Where can I get a new screw for this? Any of your ideas are welcomed

nice video -- but at 6:20, what are you trying to say is the solution? You took what and connected it to what?

I am having the same issue, beeps sometimes and sometimes not. Will check and see if that's my issue as well.

I WISH YOU WOULD HAVE CALLED ME. I DID AUTOMOTIVE ALL OF MY LIFE. I COULD HAVE TOLD YOU IT WAS A BAD CONNECTION. THE KEY WAS NO TONE OR RING AT THE KEY THAT WAS THE TELL TALE SIGN.

I have the same problem. Just a bad design apparently. Shame on Seadoo. My bigger question is that stupid relay. Which way does it plug in? You need an electrical engineering degree to read the relay diagram and seadoo wiring diagram from the service manual to decode it all 😝

So with a test light you discovered that a fuse is burnt

There's no such thing as AC current on a jet ski it's all DC

Its DC Voltage,not AC

You do know that 12v is DC and not AC?

that would be DC voltage.. and i am not a mechanic either

I HAVE PAIR OF 12'S GTI'S AND SOMETIMES THE DESS KEY WONT READ AFTER RIDING A WHILE. AFTER SEVERAL MINUTES OF TRYING IT FINALLY WORKS. ANY TIPS??

And it’s 12 DC voltage home skillet 🍳

Thats the problem of my jet ski ?

DC voltage

I'm watching this video beacuse my ski have no power at all

Its DC not ac

AC ... DC lol

are you huffing and puffing because its 80 degrees and your chilly??? what the heck are you huffing and puffing about you just run 5 miles to put a light on a wire and that's exhausting??? my goodness

Get rid of that piece of junk and get a Yamaha Sea-Doos are nothing but junk