Тёмный
No video :(

Sears Suburban Axle seal and fluid change , SS14 garden tractor. 

wtbm123
Подписаться 35 тыс.
Просмотров 10 тыс.
50% 1

Sears Suburban Axle seal and fluid change , SS14 garden tractor.. I noticed a axle seal was leaking really bad on the SS14 sears suburban that i just picked up. Usually the 30w oil in them is contaminated by water so i changed it too. The axle seal on the sears suburban is really a easy job. . I used 30 weight motor oil , non detergent to refill , as the sears suburban owners manual called for 5 qts of it . Also need to check the axle has no up and down or sideways movement , to be sure the new axle seal wil fix your sears suburban . Garden tractor repair. WTBM123

Опубликовано:

 

25 ноя 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 60   
@inthebackyardwithdel438
@inthebackyardwithdel438 Год назад
Nice job .
@wtbm123
@wtbm123 Год назад
Thank you
@victoryfirst2878
@victoryfirst2878 3 года назад
Oil is cheap so fill it to the top. Does not hurt the transmission
@wtbm123
@wtbm123 3 года назад
prob could overfill especially if it is a leaker
@dbeaumontresident847
@dbeaumontresident847 2 года назад
I own a 1972 SS14 Sears Suburban as well. And your video taught me a lot about it! Thanks and I look forward to any new videos about these amazing little tractors!
@wtbm123
@wtbm123 2 года назад
Glad to help
@johnchadwicktilton
@johnchadwicktilton Год назад
@@wtbm123 I am a little bit rough on mine as I use it as a garden tractor. I now have a wheel bearing noise. I am guessing the housing has to be opened up to fix that ?
@wtbm123
@wtbm123 Год назад
@@johnchadwicktilton probably . I believe there is a bushing where the axles come out . i believe can get a seal kit on ebay . . i believe the internal bearings are still available
@johnchadwicktilton
@johnchadwicktilton Год назад
@@wtbm123 Thanks/ I might have to dig into her and take a look. Something is definitely making some noise.
@high-noonduals2116
@high-noonduals2116 2 года назад
Asked RU-vid about changing mine. I figured there was a vent. Excellent video, thanks!
@wtbm123
@wtbm123 2 года назад
Even with bolt out it goes slow
@yourbeekeeper
@yourbeekeeper 6 лет назад
At least that hub came right off. Great fix, thanks for sharing.
@wtbm123
@wtbm123 6 лет назад
Yea . I just hope they stay on now . lol
@RustyGlovebox
@RustyGlovebox 6 лет назад
Nice job getting the old seal out in one piece.
@wtbm123
@wtbm123 6 лет назад
Thanks for stopping by and commenting
@dondig2617
@dondig2617 Год назад
Great video wonder if this is like a Sears 10XL 1971?
@wtbm123
@wtbm123 Год назад
Would think so . it is a 4 speed i think.
@TheOpenAirGarage
@TheOpenAirGarage 6 лет назад
Seal seemed to go in fairly smooth. Nice work Terry.
@wtbm123
@wtbm123 6 лет назад
Yea all seems well now
@ceedell
@ceedell 6 лет назад
A few years ago I changed the trans axle in my snow blower tractor Suburban 16/6...what a big job!
@wtbm123
@wtbm123 6 лет назад
I need to drop mine to get to the brake band and replace the lining
@RooneysSears01
@RooneysSears01 6 лет назад
Great fix Terry! I think that's why I like these old Sears so much, they for the most part are pretty easy to fix. lol
@wtbm123
@wtbm123 6 лет назад
For the most part easy to work on , a few places they could of given another 1/4 inch or so . lol
@ManicMechanic007
@ManicMechanic007 6 лет назад
Nice work Terry.
@wtbm123
@wtbm123 6 лет назад
Thank you
@TheEZGZ
@TheEZGZ 6 лет назад
That old oil looked better than expected.
@wtbm123
@wtbm123 6 лет назад
Yes Happy there was no water
@TheShadeTreeFixitMan
@TheShadeTreeFixitMan 6 лет назад
Good tips, Terry.
@wtbm123
@wtbm123 6 лет назад
Thanks George
@mschiffel1
@mschiffel1 4 года назад
A guy in another RU-vid video pulled his tractor up on its side and took the plug and elbow right out. Then he used an ATF funnel and poured the 30W oil right in without spilling a drop. Saved lots of time and spilling.
@wtbm123
@wtbm123 4 года назад
You can do that , I jack the fill side uo a bit more now and it still a bit slow but much better . Thanks for watching and commenting
@greenyellafella3777
@greenyellafella3777 6 лет назад
great how to video and great advice on making the job easier! thanks
@wtbm123
@wtbm123 6 лет назад
Thanks for stopping by
@loumonte658
@loumonte658 6 лет назад
excellent video, thank you brother.
@wtbm123
@wtbm123 6 лет назад
Thank you for stopping by
@wyattoneable
@wyattoneable 6 лет назад
The PVC pipe is a good idea. Not so harsh as a metal pipe. But you got it done anyway, good deal.
@wtbm123
@wtbm123 6 лет назад
Thanks for stopping by and commenting
@Timetotinker
@Timetotinker 6 лет назад
your pretty good at that, I will bring mine over and you can fix it up................tony
@wtbm123
@wtbm123 6 лет назад
Bring it on over . lol
@ozzstars_cars
@ozzstars_cars 6 лет назад
On to the next step
@wtbm123
@wtbm123 6 лет назад
Yea , Hope a charging video is soon . if i did not mess the footage up . Sometimes i forget to hit the record button .
@carolinamanjr1385
@carolinamanjr1385 6 лет назад
Nice fix
@wtbm123
@wtbm123 6 лет назад
Thank you
@vw64manyrd
@vw64manyrd 6 лет назад
Thanks for the lesson!
@wtbm123
@wtbm123 6 лет назад
Thanks for stopping by
@tuckerbuzzell1882
@tuckerbuzzell1882 3 года назад
What oil does it take
@wtbm123
@wtbm123 3 года назад
5 quarts of sae 30w non-detergent oil. And the higher you lift the fill side the faster the oil goes in
@bobgwinn5091
@bobgwinn5091 6 лет назад
cool fix
@wtbm123
@wtbm123 6 лет назад
Thanks for stopping by
@revolution3797
@revolution3797 4 года назад
Hope you're still around enjoy watching your videos. My question, is the ss15 have the same axle seal as the ss14? Also have you replace your transmission gasket? I need one as well
@wtbm123
@wtbm123 4 года назад
yes same seal . the gasket may still be available at sears parts direct I believe the sears part number for gasket is 6275H , think new number is 532121878 .
@zx8401ztv
@zx8401ztv 6 лет назад
Well thats all happy now :-D That small seal looked like a pig to remove, the hook looked good, but it has to be a really good one. If you were worried about damaging the seal on the edges of the key slot, perhaps filling it with crap body filler would make it safe, slide the seal over it, then rip the filler out with a straight screwdriver. Yes i have evil thoughts LOL :-D
@wtbm123
@wtbm123 6 лет назад
Just easy to roll the seal and knock the spring out , getting them started over the axle
@snocrushr
@snocrushr 6 лет назад
👍👍
@wtbm123
@wtbm123 6 лет назад
Cool
@saulgoodmanfromthehittvsho1314
@saulgoodmanfromthehittvsho1314 4 года назад
Where do you get the seal from, is there a link brother?
@wtbm123
@wtbm123 4 года назад
I had got it from Napa , 9838 , but any parts store should be able to cross reference that number .
@saulgoodmanfromthehittvsho1314
@saulgoodmanfromthehittvsho1314 4 года назад
@@wtbm123 awesome sir thank you so much!
@JerrysThisandThat
@JerrysThisandThat 6 лет назад
Ready for some wheelies Lol.
@wtbm123
@wtbm123 6 лет назад
Maybe after the new drive bet
Далее
633A38 Transaxle Differental Lock
13:55
Просмотров 83 тыс.
How To Replace an Oil Seal with Taryl
6:21
Просмотров 519 тыс.
How To Replace a Sears Suburban Axle Seal
3:29
Просмотров 5 тыс.
Sears Suburban Drive Belt Adjustment
8:12
Просмотров 17 тыс.
Replacing sears suburban transmission seals.
32:42
Просмотров 1,1 тыс.
sears attachments
3:10
Просмотров 63 тыс.