Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT! 

Here is a video about the turntable ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5jYI9zhQYvU.html

I never knock anyone for showing a video that may help another individual. Thank all of you. So very much.

Thank you for taking the time to show others skills they are trying to learn on their own.

THANKS FOR POSTING One thing, though..., turn your voltage and wire speed down and you can run a continuous bead instead of tacks, so when you grind it smooth, you're not grinding all your strength away. I'm not trolling...just helping the fellow out. Adjust your power till your bead sounds like frying bacon. If it's too jumpy, cut your wire speed back a tad. You need a closer wire stick out, for thinner metal and if you have a thick metal and a thin metal, throw most if your heat onto the thicker metal and wash back onto your thinner. Use an elongated cursive e pattern as you move. When you get to the end of your run, double back on itself before you stop. That wat you wont blow a hole in your edge. You'll see a BIG difference.

I read a lot of negative comments here, but for some of us that are part time welders or fabricators, and do not have a full set of tools, only a manual grinder/cuter this is very illustrative. I will definetely build my own working table with this instructions...wish me luck

,, muy bien Bueno muchísimas gracias por mostrarnos tan linda experiencia que nos servirá mucho a nosotros

Thanks a lot for your great welding video ! Very inspiring indeed. Thanks for sharing !!!

Truly excellent! You are a very talented fabricator. Thank you for sharing!

Серый, ты красавчик. Так держать. Продвигай знания в массы. Профессионалы вымирают, если не делятся секретами. Скажи спасибо своим учителям. Тебе хороших работ. На балбесов , что ставят дизлайки не обращай внимание. Ущербные...им до тебя еще расти и расти, не уменьем так душой.

Great video, Sergey. And yes, it is cost-effective. Difference is for those of us who were schooled in "Eastern" Europe, the technician is taught to perform numerous tasks. Welding, grinding, cutting, shaping... All of this is part of the curriculum. And of course, drawing and measuring.

Magnífico trabalho amigão!!!!

This was a lot of great work and tips. Thank you for sharing.

Parabéns.. bom trabalho ! Congratulations.. good job !

Sergey, you are doing some fine things here. Many of the little geometric tricks that you perform in this video are impressive, but not too cost effective for those of us who must work for a living.

Parabéns! Excelente profissional

Merci ! Beaucoup d'idées intéressantes pour un futur soudeur en herbe....

this is very useful idea, and we can use it in our everyday life. Good job!

Nice table Sergey, great job.

Every Tradesmen got there OWN WAY OF FABRICATING WORK ETHICS - No-one is perfect-no, NO-ONE IS- AWESOME VIDEO - KIA ORA

Simple and clear ! Thank you.

I'm just learning to weld, I think this is a perfect welding table. Thanks for the great idea. 👍

I THANK YOU for sharing this KEWL Work-Bench/Welding Table! I gotta make one-o-Dees! Give that man a C-Gar!!!

Espectacular tu mesa de trabajo. Avía imaginado una así, también

Thank you for sharing awesome video.

Sometimes it not about if there are better/faster ways. It’s about the outcome. Having the knowledge how to do things different ways with the same outcome, make people like this guy very valuable. ...."in my humble opinion"

Молодец красавчик руки золотые ⚒🔧🔨⚒⛏👍✋

Наконец-то секрет профильной трубы раскрыт! Больше сварщики не смогут его скрывать!!! 😂😂😂

Phaaa!!! Maravilloso. Soy una señora de 62 años, pero mer volo la cabeza con este video. Voy a intentar hacerlo!! Te felicito!!! Gracias por compartir

верстак зачетный, решение со столешницей, благодарю за идею, привет из СИБИРИ

Boas dicas em diversos segmentos!

Потому что, это более трудоёмкий способ получения неразъёмного соединения. Так можно сварить для себя. В производстве это экономически не выгодно.

congratulation ! I admire the way you performed thanks !

Thank you for this video !! Keep them coming !!

Полезные действия с профильной трубой и классный верстачок.

Смотрел бы и смотрел, никогда бы не подумал, что под музыку, без визга болгарки, так залипательно смотриться 🤣 очень классное видео. 👍👍👍Ну и полезное, да

I'm not a welder. I use to cut the steel on the Radiack saw and I did the grinding to remove the weld slag for the welders. You do good work. Impressive. Quality work. I can tell you are a really good welder.= that takes pride in his work.

Gracias por compartir tu tiempo y tu conocimiento es de gran ayuda para nosotros los soldadores Saludos desde Nicaragua Johnny Guardado. Felicidades

Ну вот, теперь я точно знаю, что все эти способы были оказывается Секретом. А я то наивный думал, что их знают почти все кто работает с металлом. ;)) Стол, кстати прикольный. Только немного не доделанный. Сторона с металлическим листом понятно для чего, а на обратную сторону нужно лист толстой фанеры прикрутить. Что бы закрывала профиль внутреннего стола. Для столярных и прочих работ. Тогда стол можно считать годным.

Esto es a lo yo llamo un soldador detallista y con estilo profesional. Saludos desde Panamá 👍🇵🇦

Excellent craftsmanship. 👍

i love the working table that you made i like to made like your tables thank you for the great ideas you have sir! 😍👍👏👏👏

Muito boa ideia para uma bancada de trabalho! Está de parabéns!

Gooooooooooood

Thank you for showing & great ideas

newbie here.. thanks i learn a lot of techniques from your videos☺️

Ok. I'm a welder. I don't have much time, so I'm just gonna teach you how to weld this secr...

one day this bloke might even learn how to weld lol

Very informative. Thank you.

Very nice table brother that was awesome just started watching because I had made the 45 corners before. And watched the whole thing realised you were building the table

Cutting out two triangles and bending it to fit would've been faster

LMAO!... *DISCLAIMER: NO WELDERS WERE HARMED OR QUERIED IN THE MAKING OF THIS BAKED POTATO....

Very creative ideas, well done and thanks for sharing it with us 🙏🏼

Hey @Sergey / @Handicrafts, I loved the intro of the video, awesome. Very unique, sounds Dynamique, looks professional. Tips are quite general but presented in a cool way. Had to love it!!!

Вот времена...... Обман, и главное креативно... Ещё в название надо было добавить DIY, и "жена увидела...." Печаль..... в настройках ставлю "никогда не предлагать видео с этого канала".

I watch a few of this guys videos. Interesting. But I got say I think he need to get a new pair of gloves. 😂

My friend, you are the best! Receive my thanks for your valuable teachings and a sincere hug from this humble apprentice, from Brazil.

Excelente idea de la mesa!!! Genial.

Had to fast forward during the welding parts. I was unsure if I should wear a mask as well to protect my eyes.

No vi el dobles donde se cortan barios ángulos Como el del fondo de video, al comenzar

Bravo 👍👏👏👏👏👏👏 muy buen trabajo, saludos cordiales desde Chile 🇨🇱😷 y gracias por compartir su experiencia

Finally a video of useful ideas. So many make useless things and claim they are great ideas. Your video actually is a great idea video. Thumbs Up!

0:00 - 0:08 me preparing to make a sandwich

There are better ways of doing these by far. And I get a chuckle every time one of these roll across my feed. I can't help but think "A grinder and paint will make me the welder I ain't"

Very awesome work! Thanks for sharing. there is no one way of doing things!

Excelente, saludos, abrazo.

This video made me wish there was a playback speed higher than 2

Eu: Hoje eu durmo cedo. RU-vid: não, vc vai assistir como cortar barras de ferro.

Amigo muchas felicidades, que bien todos sus trabajos, son de mucha motivación, un saludo desde Sincelejo Sucre en COLOMBIA

Trabalho admirável, só tenho que parabeniza-lo, 👍👍👍👏👍👏🍀🇧🇷

Honestly at this point I’d just take some sheet metal and make 2 cuts and weld it. That’s if I ever needed to weld a cap at the end of square tubing.

That’s so much extra work lol

That is an awesome table I'm going to try to make one as well. Super cool

Magnificent work, creativity at its best. Could you please make a list of your garage tools and equipments in the description?

Can you do this with round pipes?

First of all it takes to long. Second there way easier ways to it.

interesting weld techniques to keep in mind but I like the work bench best. Nice work

FELICITACIONES, muy buena trabajo.

I'm a welder. Thought I'd learn something new today. Nothing here. Still looking. 😁🤣

Большой секрет для маленькой такой компании, в которой только автор видео!

Awesome informational educational video experience Y'alls God Bless Ya 🙏

Thks for share your knowledge!!! 👌🏻

Why tf did you cut 45s on the first one and not just put them together it would have been so much easier

good welders dont grind off welds

i can do it’s cating to fitting, my work place Malaysia, good job😍

Good Job!!! Enjoyed the video!! Didn't have to put up with long-winded, meaningless talking, the guy just worked!! In process of building a welding table and just changed my plan to a turntable!!

Man who does their layout with a paint pen

Ни чего нового, бесполезный стол, ни понятно для каких целей перевертыш, если можно работать за сварочным крепким а не этой болтушкой, единственное удобно мусор сбрасывать

Una belleza de trabajo!!! 💖 Y en un video paso a paso y sin blablablá! Imágenes claras, precisas y concisas 💪🙄💖 Hermoso! Muchas gracias!! Like, suscrito y share por Dios!!

Boa noite meu amigo Parabéns show de bola tmj 🙏

Super, mais Les soudures sont tellement meulée, que c'est juste collé...

Ну вот, взял сдал всех сварщиков. Это же как военная тайна была, КГБ уже ищет тебя.)

Excelente la idea del giro del tablero, muchas gracias

Alright, a very nice table, well done.

Всмысле? Где секрет? Кто про что не рассказывает?

вот ты взял и все секреты наши людям раскрыл, как нам теперь зарабатывать на жизнь?)))

Svaka čast, ovo vredi zlata.

I like that work bench!

Yeah, i'd grind my welds too if they looked like that.

Takes too long, bending a tube to fit works better in most situations, ect...

Vc é o mago da serralheria,to ligado aqui do Brasil.