for some reason second method gives me an error(probably because I've updated scooter) and first one doesn't work either. sometimes I manage to switch the "unlock higher speed in S" controller. but it just turns off every time I restart the scooter, and speed just doesn't change what's wrong?
I might not fully understand, does the first solution work with the original software as well, or does it also require hardware modifications? If yes, is there a solution for the Ninebot F2 Pro where the scooter doesn’t need to be disassembled?
@sidi87 method 1 and 2 don't require taking apart unless you need to swap a controller. MAX G2 serial convert:X F2 Pro serial convert:S Will work for f2 pro with method 2 and method 1 If you update your scooter and try method 2, it won't work for g2 and f2 series. That will require a new controller then. No modifications required.
@@DJIDudeX2011 I cannot authenticate with the power button. The application keeps freezing. I don't have a region change button. I haven't made any modifications; everything is as it was when I took it out of the box.
What's the most optimal way of using this one? Updating the firmware and doing the hack or not touching the firmware uptades and directly out of the box do the hack? In both cases, will the warranty proceed?
@@DJIDudeX2011 people are yelling not to upgrade the firmware cuz it messed up with the torque and some speed features as I've written.. I'm completely lost.
Master control 1.11.1 (yesterday was 1.7.8 or something) and not working. If I change the start speed to below. 3km/h, it gives me the message that only on global version.. More speed is S mode can't be toggled under any form. You think they update the app regularly (Xiao) to keep up with Ninebot patches?
Hi! The second method doesn't work for me because I did an update recently. But in the first method, the app won't let me toggle on the higher speed in S. Any ideas why?
@@Idkmusic272 try to put your start speed as 0kph. Then keep toggling it until it turns on. Freely spin your motor while toggling it. You will hear it rev up when you are successful.
Yo la compre aquí en Colombia y viene a 25km, más desde la app de ninebot puedes ajustar la potencia de el motor y subir la velocidad a 35km sin modificar nada, solo ajustes desde la misma aplicacion
U mnie niestety nie działa. Nowa hulajnoga, wersja EU, kupiona w Polsce, max. speed 20 km/h. Podobno mam z najnowsze oprogramowanie w którym nie da się zastosować metod pokazanych w filmiku.
@@DJIDudeX2011 sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
Hi! Isn't XiaoDash paid? Last time I looked, they were asking for money within the app. On my MAX G2 Master Control: v1.5.3 (I haven't updated to a newer version since I got it) Can I hack on this one? Thanks
@intuicio xiao dash will want you to pay if you want to expand your scooters functionality. It should ask you to pay on the BASIC side. The app is free.
If Your talking about F2 Plus. You can do method 1 like the g2. Method 2 is different. Instead of changing the fourth letter to X, you change it to S. You can change to X and will still work.
sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
What firmware were you on? I think I will end on the same fate Man man man I hate these German rules 400KM/H in the Highway is no issue But 35km/h on a scooter: 😱😱🚔🚔🚨🚨