Selecting Table Saw Blades - Types, Uses and Buying Advice

Подписаться 554 тыс.

Просмотров 269 тыс.

50% 1

Support What We Do at The Katz-Moses Store lddy.no/stih
In this week’s woodworking skill builder we’re talking about Table Saw Blades. I go over the different types and give some great buying advice. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
Read the blog on this video: kmtools.com/blogs/news/ultima...
----
CMT Saw Blades (3 new patents 2022) 32%-50% off plus Use Code KMT10CMT for Additional 10% Off-
ALSO check out their BRAND NEW THIN KERF CHROMIUM BLADES (2022) kmtools.com/collections/cmt-s...
*The Katz-Moses Store (Suizan Saws, Stop Block, Dovetail Jig and more):*lddy.no/stih
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd

Хобби

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 431

@katzmosestools 4 года назад

*CMT Saw Blades (3 new patents 2022) 32%-50% off plus Use Code KMT10CMT for Additional 10% Off-* *ALSO check out their BRAND NEW THIN KERF CHROMIUM BLADES (2022)* kmtools.com/collections/cmt-saw-blades *The Katz-Moses Store (Suizan Saws, Stop Block, Dovetail Jig and more):*lddy.no/stih

@madkinson1 4 года назад

Just ordered a rip and cross cut blade.. i was honestly on the fence about buying my first forrest blade but i just couldn't justify the cost when ive never had any issue using my freud glue line rip blade.. anxiously waiting to see if there is noticeable difference between them!! I've also read a lot of poor reviews on Forrest saying they just don't make them like they used to and that there no better then Freud at the 3-4x's the cost.. I'll let you know my experience but at that cost i got one of each for under 120 bucks!!!👍

@chrischatham5948 4 года назад

Matthew Adkinson just did the same. Can’t beat the price for giving em a shot.

@dpcnorcal7021 4 года назад

You just posted this video 20 hrs ago and your recommended supplier is already sold out of the blades I need. So much for supply chain management. Amazon has them in stock. I guess Bezos did make his move.

@katzmosestools 4 года назад

They're going to be back in stock in about 10 minutes. Dont miss it because the company cleaned out CMT on their 2nd order.

@katzmosestools 4 года назад

They're going to be back in stock in about 10 minutes. Dont miss it because the company cleaned out CMT on their 2nd order.

@grayrichardhenry 4 года назад

Great video, thanks for the information! One point to fix is your comment about copper plugs at around 2 mins. Copper is actually a very good conductor of heat (about 7 times as good as Steel). I think the plugs are there to reduce noise and vibration because copper is softer.

@dylan-nguyen 2 года назад

It’s also a mini heat sink All the heat moves to the copper instead of the steel blades

@romeoC9968 4 года назад

For a beginner like myself, this was the most informative video I have watched on saw blades. Thank you for putting this together.

@short7440 4 года назад

I don't even own a table saw and I am still watching this video.

@mattambrogi6734 3 года назад

...I bet you have 7 or 8 different miter saws though. Have a great day.

@phantomcreamer 3 года назад

Get one

@fuzzy6329 3 года назад

Same here 😂🤣

@jodyaugust5087 2 года назад

I bet you own a table saw now in this video is worth it

@RVHabit 4 года назад

I ordered the combination blade and just received it today. All I can say is, Wow! This is a nice blade and sharp as sharp can be. It cuts wood like butter. Thank you and thumbs up.

@InterventionalWoodworking Месяц назад

I bought your essential saw blade bundle. 1. Immediately, my saw was quieter upon first power up. 2. My cuts were absolutely smoother and less effort...yes the blades were new. 3. Ive been cutting daily for one month with virtually NO detectable change in performance...the only maintenance has been to clean the blades with the CMT cleaner that comes with the bundle. I absolutely recommend first, to purchase from small businesses like KM, and second, to make your own comparisons on your equipment/tools. I believe you'll find that JKM is spot on with what he claims in this video.

@michaelmunro2820 4 года назад

I am new to your RU-vid channel. My first vocation was that of a mechanical drafter. I was educated for this and after doing time in the military I found work as a draftsman for a construction firm. After several years of this, I was drawn to the work done by carpenters on the project and changed my vocation to that of an apprentice carpenter. I am now retired and have set up a woodworking shop in my garage. Recently, I constructed the CNC as shown in Woodworking magazine. I am proficient with Sketchup and now working on a class about Fusion 360. You have a great channel, and I will continue to follow.

@tonyr484 4 года назад

I'm a newbie to woodworking, & this is hands down the most thorough & professional explanation on saw blades I have come across Period!

@markmurdocca2456 4 года назад

Great video. I know I needed a better miter saw blade but didn't know how to decide. You've made it simple. Thank you!

@egj1975 Год назад

I have used CMT for 20 years and they are the best. I am resharpening them up to 15 times. Festool are also really good but also quite expensive. Stay safe ya all

@StamosTee 4 года назад

Honestly that was the best video I've watched about saw blades. Great presentation 👍

@ethixphotog_adventures 3 года назад

Thanks buddy! You're one of my favorites on RU-vid. I bought your stop block yesterday too and making an awesome sled. You and burbonmoth are awesome.

@1832pro 4 года назад

Thanks JKM! I'm learning that even the simple things I still need to learn much more about. Thanks boss!

@randalblair 4 года назад

Very well done video! I recently brought a high end blade and it has made a huge difference in my work.

@fredkoch1109 4 года назад

Thanks for the thorough review and instructions Jonathan! A new rip blade will be in the shop soon. Great deal.

@ForWildsSake 3 года назад

great video, awesome prep on blade templates. overall very educational video. Keep up the great work!!

@joebiggerstaff636 3 года назад

As a newbie, I cannot thank you enough for these "tool" videos, Joe.

@kevinetheridge6153 4 года назад

A very nice, comprehensive video on blades and teeth and whatnots. Thanks!

@markparker9092 4 года назад

Jonathan, I usually watch your videos on TV, so never comment. This one video is an exception so I’m using my IPAD. GREAT information. I plan on getting a couple of the new blades. Love your videos. Can’t turn out the work you do cause my cheap ass power tools. Your still an inspiration. THANKS!

@BiggMo 4 года назад

This is really good advice. I remember the first time I installed a thin kerf Forrest blade on the Ridgid contractor saw I owned in the 90’s - amazing difference. I felt like my entire saw was upgraded.

@josemilian4167 2 года назад

would have been cool if you gave a bit of info on what blades cut certain materials better and why you want to use specific blades for different materials and then maybe show some cuts on different materials.

@stufarnham 4 года назад

Jonathan, Your description (plus the deep discounts) persuaded me to order a CMT combo blade from Taytools. The blade arrived today. I’ve only had a chance to make a few test cuts, but what was immediately obvious was the quality of the build. A very well made blade from all appearances. I’ll follow up here after I have had a chance to use it on a couple of projects. Stu

@katzmosestools 4 года назад

Great to hear bud!

@livingthereal 4 года назад

Was just contemplating this topic! Thanks for the advice and the lead!

@GiGaSzS 6 месяцев назад

Thank you for this thorough explanation of different types of blades and quality!

@makethepart 4 года назад

Great Video, very informative about the WHY behind the different options and anatomy.

@dennisseemann571 4 года назад

awesome, you have changed my saw blade buying habits with this video, no more low end blades, thanks for the education.

@katzmosestools 4 года назад

Hahaha it really is a no Brainerd. Cheers bud!

@ruizd14 3 года назад

back when you first released this video I bought the rip and cross cut blades with the cleaner and man I have been so happy with the performance of these blades especially the rip blades cut through 8/4 hard maple like butter I really mean it so thanks for the review and I have only had to clean the rip blade once using the cleaner and I also then spray on glide coat dry lube and it's like cutting sticks of butter no matter the wood species.

@ryanbecker6584 3 года назад

I finally put my rip blade on and I couldn't believe how great a cut it made! It even crosscut better than the crosscut Sawstop blade I have, so I just ordered a crosscut one. Might pick up a crosscut for my miter saw too! I honestly thought the claims of using a high end blade were overstated, but I was wrong and couldn't be happier!

@ivanruzevic981 4 года назад

AWESOME tnx for the tips. For me this is the best video format. Useful and educational, and also best deal

@katzmosestools 4 года назад

Win win win

@RMquickbit 4 года назад

Great video, just bought a general purpose 40t hiatb cmt blade and absolutely love it! Great content man keep it up 🤙🏻. And like you said the blade is intentionally made to sharpen which is awesome.

@dariushmilani6760 3 года назад

Jonathan, your educational videos are great. Keep up the good work. Regards from UK 👍

@markcrowley1804 4 года назад

Just picked up the combo blade. Thank you for the video and the special deal. Glad it was through Taytools as I have purchased from them a few times. Good Missouri company that has great service.

@GeorgeIreton 3 года назад

Thanks for the excellent info. I just ordered a rip cut blade and the cleaner. It is now mid-December and they still honored your offer code! I have high hopes on this! Thanks again my friend!

@johne9341 4 года назад

Thanks for the very informative video. You are right the Forrest blades are top quality with great customer service and they do the sharpening and other blade tuning and truing for you at a very reasonable price. Made in the USA!

@jimspring7434 4 года назад

Thanks for the information. As pre usual you present the details in understandable fashion. I'm going to invest in some of those CMT blades.

@j_b_9381 4 года назад

Came for the view, stayed for the deal. I totally didn't expect to be buying saw blades when I sat down this evening to catch up on my sub videos but you sold me with the big discount deals. I just ordered myself a new rip and crosscut blade. Thanks!

@giulioterigi1581 4 года назад

Living in Italy I know CMT very well. With Fraiser they are some of the best Italian companies for woodworking out there. I'm glad that you like it

@mikeoneill2127 4 года назад

Okay Jonathan, I just got a new table saw so we’ll see how these blades work in it. Thanks for all the videos, keep it up!

@chipsterb4946 4 года назад

Great instructional video! I already knew some of this, but learned so much more than I expected. One comment: I work almost entirely with plywood. A specialty plywood blade from Forest is awesome. Much cleaner cuts and much less burning. A rip blade is way down the road for me ...

@boomerangfreak 2 года назад

Yeah first thing I bought for my tablesaw was a 80T tcg blade from cmt. It actually is a splinter free cut. SUPER clean!

@larryk6330 4 года назад

I have two blades I use for pretty much everything; A Forrest Woodworker II 20 tooth Rip and a Ridge Carbide TS2000 Super Combo Blade 1/8" Kerf ATBR 40 Tooth. I've had the RC sharpened (and repaired - bent a tooth) and it works pretty well. Just ordered the CMT Ultimate Cross Cutting 60 tooth blade. Looking forward to seeing how it compares.

@justinbentleybse 4 года назад

Great Video! thx so much for A: explaining everything in detail with visual examples especially rake and B: showing off the blade I want to buy (CMT 80T crosscut) ;)

@74nrt Год назад

Awesome video! Answered so many questions for me, thank you

@campriole5410 3 года назад

I purchased CMT blades for both my chop saw and table saw. They are incredible. Very sharp, Mirror like finish on my miter cuts. Thank you for the recommendation.

@Dragon-Slay3r Год назад

It's a huge broken saw blade from the other day with a toucan blade with the cover.

@FTADaddio 4 года назад

Thank you for the codes, just ordered a ripping blade and I have been needing a dado stack for some time now. I can't wait to try them out

@katzmosestools 4 года назад

The dado is awesome! The shims are super cool and don't get stuck in threads as easily

@kevincary1 4 года назад

That was great Jonathon. And wow you aren't kidding on the deal. That really is a killer deal right now for a high quality blade.

@FaignDaeth 4 года назад

Thanks for the info! I’ve been looking to pick up some higher end blades, just picked me up some of these blades, can’t wait to try them out.

@katzmosestools 4 года назад

You'll be very happy

@Forbes123 3 года назад

What a great video, you put a lot of thought into it.

@smacfe 2 года назад

September 18th and the code still works. Great prices on these blades AND the new 3M sandpaper which is a must buy item as well. Thanks!

@g8r22 2 года назад

Great video. One thing though - copper transfers heat much better than steel. That is why it is used in heat exchangers.

@ashilling9283 4 года назад

Had been looking at blades and was going to talk to my Dad about it, but then you made this video. Thanks so much! I bought my blades with your discount code. I wonder if someone might read my comment and think, "oh no, you are not going to call your Dad now". I talk or email with my Dad just about every day. He's the best! I got lucky. Love your videos, Jonathan!

@katzmosestools 4 года назад

I talk to my dad about every day to! Not wrong with that haha

@WFcameradad 3 года назад

Thanks for all the knowledge. You’ve definitely helped me improve my woodworking game. Now that I’m spending some real money on saw blades, I’m curious what you do to care for/store/clean your saw blades.

@georgejones9059 Год назад

Such a good video with accurate info, thanks.

@nn2380 4 года назад

Nice video and impressive blades. They were a good deal and I also made a purchase. Thanks!

@benjenkins2415 2 года назад

Just bought the blades from Tay Tools. Really great educational video. And discount code still works!

@BronkBuilt 4 года назад

Tons of great information. Thanks for sharing!

@tommycristaldi9037 4 года назад

Awesome video. Thanks for the information!

@watti-yi7sw 4 года назад

Great video! For me I agree Freud is a great jobsite blade but is a 'throw away'. Used Forrest and CMT for years for trim work/cabinetry. Both resharpen multiple times. Something to look out for...the person that resharpens your blade. That's why I use Forrest blade service. Not only do they resharpenand set the rake but also retention the blade even weld new teeth if needed. The grind is perfect like brand new. They will also do other manufacturers. Even though more expensive that's why I lean toward Forrest for fine finish. Check out their service. Thx for vid and your usual spot on presentation

@azmike1956 3 года назад

Freud makes different grades (lines) of blades, the Diablo being the lower but more affordable line (still can be sharpened). Make sure your sharpening service isn't just over grinding your blades to sell you new ones. My Freud 8" safety dado is a very nice long lasting set, check out more of their products.

@dro8528 4 года назад

I used the link to buy a CMT saw blade and was amazed by the difference it made. I have also used your link to get your favorite dovetail saw and my wife bought me your dovetail guide last year. All have been amazing and well worth it. My dovetails are getting better and better.

@katzmosestools 4 года назад

Awesome my friend!

@bridgetboo73 3 года назад

Thank you for video. Very informative. I just ordered the blades and the discount code still worked!! :)

@stufarnham 4 года назад

Gonna give these a try ... At this price it’s worth a shot, and I trust your recommendation.

@dadsdoit4770 4 года назад

Got the general purpose blade for my new saw and the cleaner thanks for the discount! also got a free magnetic angle finder

@ziyadbagharib7803 4 года назад

Perfect timing. I'm so glad I hadn't gone ahead and bought new blades before you published this video. Any updates on the Katz-Moses apron that's going/gone into production? :D

@JDDupuy 4 года назад

I ordered 2CMT blades from your link. Been using Diablo blades for several years and my Woodcraft Dealer has a Vendor that sharpens them. I have had good results with these $35.00 dollar blades. The more expensive Forest blades (Rip Blade) I also have and while they run quieter, they excel better in ripping.A little more metal mass. Looking forward to these CMT blades to see how they compare. I already use the CMT Orange Blade cleaner. Good stuff. Simple green does well also on most painted blades. Thanks for the heads up on the sale and discount code.

@jamesmorse7867 3 года назад

These videos are all great! I was debating whether to replace my Dewalt contractor saw (the 7491) with a new Laguna Fusion II or invest in a Laguna 6” jointer. This video helped me decide to first upgrade my blades for the Dewalt and get the jointer. (If you think that is stupid, would welcome your comments). Thanks again!

@kaiserbailey 7 месяцев назад

Did you get a full kerf blade for your Dewalt? If so, does the saw have plenty of power to run it?

@CharlieGroh 6 месяцев назад

I went from Forrest to Tenyru years ago...and haven't had even a flicker of desire to go back. I use the Gold Medal version for GP and a CMT for ripping.

@missdee212 Месяц назад

This was so helpful beginning wood worker

@BrianThorstad 4 года назад

"Crying once" followed links, got great flat dado set $125, LOVE IT, gave away my cheap ass ragged bottom set. Also got quality combo blade... have not used yet, but it looks marvelous!!

@blakeloke5586 4 года назад

Thank you for the video Jonathan. I think you may have sold a ton of the rip blades because of your video. Immediately after watching I tried to order and the website said they were sold out. Fortunately, they sent an email next day and said the blades were back in stock. I ordered and included your discount code. Thanks a bunch!

@anthonyyribe183 2 года назад

This is Tony (Legacy Furniture LLC) from Sacramento. Katz, bro, I hope you know how much your video helps people.

@diydad6723 4 года назад

Very informative, great video 👍

@dutchkushman9984 3 года назад

I bought a table saw today. Thanks for all the info

@mattman2088 4 года назад

Awesome! I've been looking for a great deal on a dado stack for a while!

@ReferenceFidelityComponents Год назад

Have to agree 100%. Yours is the best blade buying advice on you tube. Have grown tired of watching so many vids pushing cheap blades like low end Freud, Saxton and others. Bought cheap blades and generally things like run out was good but teeth were no more than 5 or 6mm in size, not really resharpenable and never lasted that long. In the uk, CMT chrome industrial series seem the best vfm and are decent blades starting at around £60. Night and day better made to any cheap blade and with more meat in the teeth and superior coatings.

@Dad_ASMR 4 года назад

Just ordered the general purpose, great deal!

@dannymeil3294 3 года назад

Incredible job great teacher

@tmhirsch65 4 года назад

Thanks for filling my brain cavity full...again! Awesome video as always and super useful information. I've heard some of this before, but somehow I'm always watching one of your videos when I'm ready to change something in the shop or pull the trigger on an upgrade purchase. I've got an early 2000's Jet contractor saw with a 1-1/2HP motor (at least that's what it says on the plate...). I immediately bought a link belt and a Forrest WoodWorker II thin-kerf combo blade with a stiffener. I read somewhere that that saw would perform better with a thin-kerf blade. The saw performs great, and I've never had any issues (except the limited depth of cut from the stiffener). If I go for one of these dedicated crosscut or ripping blades, do you think I should stick with the thin kerf on this saw? I'd like to get the deeper cut, but don't want to overwork the saw. I don't have plans to upgrade any time soon...

@user-qg6fy4yp8t 4 года назад

Good video 👍 . I bought Freud and diablo blades for my table saw ( each for different cutting) a huge difference frome the cheap one that came with the table!!! And i bought a blade to my mitre saw from DeWalt ( i saw the Amazon reviews) it wasn't expensive but it had good reviews and from what I'm using it have clean cuts also much better than the blade that came with the mitre saw. Where i live we don't have a variety of brands and the possibility to s by sharp the blade is not available. Love all your content !! Be 💪, take care !!

@kmfw1160 3 года назад

I learned a lot! Thank you!

@jlinkhart 4 года назад

Perfect timing. I need some new blades.

@joerodriguez3338 4 года назад

I just ordered the 10" combo blade. I needed a a new one. I hope it is as good as you say. I still have the same one on it that came with the delta. Thanks.

@BrianThorstad 4 года назад

Joe Rodriguez I just got this too, plus promised FLAT dado stack

@Jeremoid 4 года назад

Man, another "go to" video was wrapped up again. So much knowledge dude, thanks a lot.

@lazyh-online4839 3 года назад

2:04 "copper is not a good conductor of heat" actually copper is an amazing conductor of heat, one of the best commonly available materials for conducting heat with specialty materials like diamond being one of the few that conducts heat better. There's a reason why COPPER heat pipes are used in any high quality heat sink for your computer. Aluminum is only ever used because it's cheaper than copper but even aluminum doesn't conduct heat as well as copper.

@SawdustmakerLori 4 года назад

Great information to know.......thanks!

@theenderface7379 4 года назад

I've been running Freud blades for over a decade and they most definitely can be resharpened. I've even had the Diablo line sharpened before, so not sure where people are getting their info from. Other than two new brazed teeth on my ripping blade, I'm still on my original blades and teeth. Not a bad investment as far as I'm concerned and I do this for a living. Six days a week, 6-14 hours a day, that's a lot of racked up hours on blades.

@joebiggerstaff636 3 года назад

Jonathan, cant thank you enough for sharing your experience with newbies like myself. Im catching this video 8 months late, what offers are available from CMT at this time, thx again, Joe

@jamesmorse7867 3 года назад

Also, thanks for the Codes. Have used them a bunch of times!

@SwapnilBhartiya 2 года назад

Wow. What an excellent video.

@timmerrill7064 3 года назад

Love your vlogs

@BryanHemedinger 3 года назад

Awesome knowledge! I wasted too much time and $$$ this video tutorial is essential for all!

@walterrider9600 4 года назад

thankyou Katz great info . me poor head hurts now must lay down . stay safe

@foos.998 3 года назад

Wow, how educational!

@davidshaper5146 4 года назад

I just bought all three CMT blades based on your recommendation. If they suck, I know where you live! Actually, I don't, but they better be good. Thanks (I think).

@besot1022 4 года назад

Phenomenal, I just bought a table saw.

@BradsWorkbench 4 года назад

Ridge carbide makes a 40 tooth ATB-R... by far my favorite blade to use. Great video bud

@samueldavis5895 4 года назад

That’s probably my favorite as well. I go with Popular.. they’re a few hundred or more per blade but worth it.

@zen9209 4 года назад

Perfect timing I needed a dado stack and go one from them for only $12 more than home depots red set that’s a great deal

@cu0ngpitt 2 месяца назад

Wow, I think this video answered my question/issue. I'm new to woodworking and have begun ripping long boards and have been experiencing blade gouges. My guess of this was being caused by the blade wobbling because my cut line becomes much wider than normal. I was cutting with a general all purpose blade, which is also ultra thin kerf. This video explains there's a difference between cut types and which blade you ideally should use. I should be using a 24-30 tooth blade and either use a full kerf or get a blade stiffener. The video recommends thin kerf for "underpowered saws" but what does "underpowered" actually mean? How do I know if my saw is underpowered other than assuming so because of lower priced buys?

@MrEldoradot 3 года назад

Forrest blades are incredible and well worth the money.

@ChrisBarrett643 4 года назад

I’m in the UK but this has been dead useful thank you.

@josephlebo7320 2 года назад

This is a great video with lots of helpful information, but I'm still stuggling with the practical difference between a general purpose vs combination blade. I just got my first table saw, the Dewalt 7491rs and want to get one nice blade to start. I'm thinking a thin kerf general purpose or combination blade but I really just don't know which I should get. 40T ATB general purpose? 50T ATB combo? 50T ATBR combo? I will be doing a lot of general lumber and plywood for awhile before venturing to nicer hardwoods. At that point I will be getting dedicated ripping and cross cut blades but just want to start with one all around one now.Thanks!

@TheWrinkledCheese 11 месяцев назад

I have an old 70s 9" saw. Upgraded from a contractor saw that had a warped aluminium table it off the box. I got a Freud Industrial combination ABTR that had a coating ( silver not red ). Forest has 9" blades but CMT doesn't. I clean my blades with liquid laundry detergent. I soak my blades for 15-20 minutes in hot water with about 50ml of laundry detergent - single pod or a shot glass filled. The pitch will wipe off with a paper towel. Some of the pitch is stubborn on the tooth face so a gentle wipe with a scotch brite pad gets it.

@JiuJitsuAngel Год назад

Had issues with the CMT blade while doing cross cuts on butcher block. Burn marks and veered off the straight edge. Going to double check square but never had issues before with Diablos.