Beginner Woodworker Tips on Buying the Right Saw Blades

Подписаться 616 тыс.

Просмотров 150 тыс.

50% 1

What is the best saw blade for a table saw? Best saw blade for miter saw? Best saw blade for hardwood? This is the beginner woodworker's guide to saw blades for both table saws and miter saws. A beginner needs to know what to look for when buying a new saw blade. This video shows you how to choose the right blade. Amazon and other affiliate links are used in this description to help support this channel.
Videos To Watch Next
Beginner's Guide to Dado Saw Blades: • Ultimate Beginner's Gu...
Diablo vs a VERY Expensive Saw Blade: • Watch This Before Buyi...
PLANS and MERCH: www.731woodworks.com/store
Greatest Free Gift: story4.us/731Woodworks
Blades Mentioned in Video at TayTools:
use code 731CMT10 to save 10% on CMT blades at TayTools
CMT 60 Tooth Table Saw Blade (TayTools): lddy.no/13sx0
CMT 80 Tooth Miter Saw Blade (TayTools): lddy.no/13sx1
CMT 24 Tooth Table Saw Blade (TayTools): lddy.no/13sx2
If you Prefer to Shop at Amazon:
CMT 60 Tooth (Amazon): amzn.to/3s71ZWo
CMT 80 Tooth (Amazon): amzn.to/35BUWgI
CMT 24 Tooth (Amazon): amzn.to/3seqMrB
Irwin 50 Tooth (actually a pretty good blade) amzn.to/3oof5NP
Diablo Table Saw Blade I Recommend: amzn.to/3oocLGF
Diablo Miter Saw Blade I Recommend: amzn.to/3uot1LF
Diablo Circular Saw Blade I Recommend: amzn.to/3ATcBMu
Dado Stack: amzn.to/3IXOqPV
Other Products I Use:
Dust Mask I Use: tidd.ly/3fv9O25
Miter Saw I Use: amzn.to/3HsdQou
Table Saw I Use: amzn.to/3gl4ZsU
Follow me on Amazon for my favorite tools and supplies: www.amazon.com/shop/influencer-4e5e1fdd
Join this channels membership to get access to exclusive member only livestreams, discounts, and other perks:
/ @731woodworks
You can support us on Patreon as well / 731woodworks
I get my stickers from Sticker Mule: www.stickermule.com/unlock?re...
I've used TubeBuddy for years to grow my channel and get awesome insights: www.tubebuddy.com/731woodworks
0:00 Intro
0:10 Saw Blade Terminology
1:34 How to Choose Tooth Count on a Blade
2:42 How to Change a Table Saw Blade
3:25 ATB vs FTG Saw Blades
5:12 Different Brands of Saw Blades
6:31 How to Choose a Miter Saw Blade
6:51 How o Change a Miter Saw Blade
7:34 What Saw Blade for Plywood
7:53 Arbor Size on Saws
8:25 How to Clean a Saw Blade
9:19 Outtakes

Хобби

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 182

@731Woodworks 2 года назад

Best table saw blade for most people (affiliate): lddy.no/13sx0 use code 731CMT10 to save 10% off CMT blades

@patrickkerfoot1989 2 года назад

I use Diablo on my miter and table saw. In took two finger tips straight and clean, surgeon was impressed. 😂

@csemeniu 2 года назад

I'm 57, been in the shop A LOT and I still learned something in this video. Thanks man, keep it up!

@allanhearl2328 2 года назад

To clean your blades get a 5 gallon bucket cover. A 10 inch blade fits perfectly, spray on blade cleaner and scrub with a old toothbrush. I use Trend Tool Cleaner.

@benjamincurtis6711 2 года назад

One more thing to mention that was not covered here regarding the kerf/blade thickness, is that a balanced saw with a thicker blade will cut better and more precise with less chance of kickback. The thinner blades often wobble slightly back and forth giving you imperfect cuts and chance to throw the wood out such as a contractor saw or midrange saw on a stand if the saw is not perfectly level. The Forrest WWII blade will last you 10 years if you take care of it and get it sharpened as seen at the end of the video. Will have to try a CMT blade. Nice vid.

@notasheep199 2 года назад

I have the Forrest for crosscut and got a CMT 24t for ripping. The CMT was a game changer for me on ripping, since it has eliminated the burning i was getting with the Forrest blade. The time I spend changing the blade is far less than the time i spent sanding the burned areas. Love the videos Matt

@blayne2029 Год назад

I really like your simple and helpful approach to new workers and woodworking. Thank you!

@Sharkey94123 2 года назад

Okay, okay! I'll replace my original saw blade that came with the table when I bought it (2 years ago)! Thanks so much for the tip, Matt! At least that will save me from having to clean it. Love your channel - been watching for several months now. This video has a lot of useful information. I've seen other people say to use nylon or brass to clean blades, never steel.

@Piscesgyal26 2 года назад

Thank you so much for this information! So helpful and you made it sound easy. 😊

@brentfowler2317 2 года назад

I've got that same DeWalt tablesaw that you showed the image of. And I love that saw. I've never found it to be under powered at all. Also the 32 tooth blade, I got that same blade with my tablesaw along with 2 other blades. I use the 24 blade tooth for carpentry type work. I use the 32 tooth blade(you had in your hand) for crosscuts. And the 60 tooth blade for rip cuts. I haven't had a problem with anyone of them. I also purchased a - Freud thin kerf 24 tooth rip cut. The only reason I ordered that one is because it was a ftg. And wow the difference. I get as good of cuts from the Freud blade as I do from any of the DeWalt blades. Anyhow I was just chatting. Great video. Anyone starting out will learn a lot from this video, Matt. I wish I would have found a video like this when I was starting out.. lol. Thanks for the great content, keep up the great work.. God bless you all. Take care.

@guybowers9094 2 года назад

I have used the Diablo blades for many years and they work great but I bought a Forrest brand blade for my table see a few years back and it's a really nice blade. Having said that. I have been using the CMT router bits for some time as well and they are great bits so I plan on trying their saw blades for my next purchase, especially after seeing how much you like them too.

@CrooksNannies 2 года назад

Informative as always! Your video editing has really come up in the last few months too! Keep up the good work!

@DriedMoss 6 месяцев назад

I was about to cut finished plywood with my handsaw and rip cut tool using a 24 tooth blade…the user manual recommended a 40 tooth or higher, didn’t know why…yup, glad I watched this video first. Thanks for the help.

@nancywitcher2641 2 года назад

Another great video. Information I needed.

@blackpillrising3164 Год назад

Nice information,thank you.

@tedpuckett2779 2 года назад

Always helpful. Thank you.

@gatoborracho4572 Год назад

This is the wonder of technology... great people sharing his knowledge... like this man . Thanks very helpful 👌

@UsNCollord216 2 года назад

Finally went from a dewalt 24t to a 60t on my chop. What a world of difference it makes with blowout too

@krisgray4025 2 года назад

I switched to CMT blades a few months back and haven't looked back. I still have a bunch of spyders and diablos but find myself using the CMT more so. They are great quality from the full kerf to the thin kerf. They also look good with that chrome finish!

@poppopsworkshop 2 года назад

Love my Diablo blades. I do have a CMT blade on my circular saw and am impressed with the cuts from it. Need to upgrade my table saw blade so I might go with a CMT on it.

@zacandmillie 11 месяцев назад

I am so pleased to have stumbled on this video. I never knew there was so much to consider in blades. I'm just getting in to outfitting my man cave workshop so I'll be looking at my existing blades and changing accordingly. Thank you.

@Damon_Barber 2 года назад

Another highly informative video. Great job, Matt! I appreciate you pointing out the arbor size difference potential between miter sauce and tablesaws. Some people might luck out and have the same size, but it’s not something that should be taken for granted.

@Dragon-Slay3r Год назад

That was in the middle of the kandoor block from yesterday with the vagina padlock

@BACHSLIQOUR 2 года назад

thanks for the video. even though i have a saw of most types the sliding miter saw is my main saw 90 percent of what i use. i will keep you tips in mind.

@DBNJWoodshop 2 года назад

Thank you for the helpful content. I jump between Diablo and Avanti.

@dumiledomani 6 месяцев назад

Really I got to thank you for your wonderful works in doing RU-vid videos❤

@chrishapp4742 2 года назад

Very good video, Thanks, Matt. I am searching for a blade to go on my table saw right now. 1" arbor, saw can take up to a 14" blade. Current rip blade that came with saw (used) is a 14", 0.177 kerf width monster. Moving down in size so I can hide the blade below the table surface when saw is not in use. After watching, I might be in the market for a couple 12" blades. One with 42 teeth, one with 96 for that cabinet work.

@ronswoodshack3855 2 года назад

Thank you for the content Mighty Matt!

@731Woodworks 2 года назад

Thanks Lloyd!

@DrFunFong Год назад

Useful! Thanks!

@stoneyj1a1 7 месяцев назад

Diablo are my favorite so far. I think they are a good price and good quality for most home woodworkers. Never tried CMT but maybe I'll try them next time.

@derekjarman1638 2 года назад

I cleaned my Diablo blades for the first time last week - was like buying a new blade!! Definitely will be doing it more often 👍

@AshHalls 2 года назад

I never even thought cleaning the blade would do anything, been woodwork for over 10 years now. I’ll be cleaning my blades on Monday

@mikeryan2802 Год назад

So good. Thank s.

@lrparrish227 9 месяцев назад

Thanks for sharing. I have a lot to learn

@731Woodworks 9 месяцев назад

Glad to help

@stevejensen3471 2 года назад

Have always used Forrest Woodworker II 10" x 20 or 40 #1 grind/square cut for most all of my table saw work. Expensive about the best out there!

@michaelbalkcom3281 2 года назад

I used Diablo blades for years. Thought I’d up my game and purchased both a rip cut and crosscut CMT Orange blade. The difference is night and day. Sure, they cost more, but in my opinion, you “get what you pay for.” Wish I’d switched a long time ago.

@d.k.1394 Год назад

Great video

@fritzginger15 2 года назад

I like CMT blades, they are my favourite for sure 😁

@marconiandcheese7258 11 месяцев назад

Its been a year since you recorded this, but thank you so much. Your explanation of a realistic "what you actually need when you start" v. " the absolute best." Its advice like Project Farm. I was really confused and lost on what I need to buy to replace my junk blade that came with my miter saw.

@chrismiracle4152 2 года назад

I use Diablo blades in my table saw and they are great.

@KyleHarrisonRedacted 11 месяцев назад

According to Project Farm my stock Ryobi blades aren't all that bad ;) Im happy to have picked up my first diablo blade, it's a high tooth count and i've been humming and hawing over which machine to put it in (both my table saw and miter are 10") and this has basically convinced me to to put this thing in the miter, and seek out a decent combo blade for the table saw

@omenreaver7953 Год назад

thanks bro this was really helpful.... my father makes wood works to sell but he has a harbor freight table saw and i see him struggling all the time with it and i would like to give him a big table saw like the one that comes out in your video but thing is that i don't know where they sell them nor have the money or the age to buy one and that sucks cuz i know how much my father likes working with wood.... i think every guy how loves wood crafts go's thru that struggle.

@DaKeCat-KunLunTooth 3 месяца назад

This video is very good. If you use the Kunlun tooth saw blade we developed, you can achieve higher results. The Kunlun tooth can make the upper and lower sides without chipping, bursting, or cracking.

@user-sb6ec7iy3o 9 месяцев назад

As always-Great 'quick' review. Hope YT provides you with residuals for a LONG time

@mattandrews684 Год назад

I bought a combination and crosscut blade from Luxite which is part of York Saw and Knife company. They have worked great the little I have used them so far.

@PatricesProjects Год назад

A lot of useful information.

@731Woodworks 11 месяцев назад

Glad it was helpful!

@bigdog51 Год назад

I like the way you explaine stuff how do you know when to change a blade

@rigsby7255 2 года назад

Had really good luck with amana blades

@p8check Год назад

Thanks!

@williamguzman6037 2 года назад

Appreciate your time and teaching. I am new to wood. Cars is another story. I restored the wood work (veneer) on a MK ll jaguar. Very expensive since I had to do it twice. I love exotic veneers. Any advice? Thank you for your time I am learning lots from you. Not to old to learn 72 glorious years😎

@jeffwilder7117 5 месяцев назад

I do like the Diablo blades. Have them on miter and table saws. I get them at woodcraft or Rockler. A little more expensive but a little better quality. Every 5th tooth is flat. Kinda best of both worlds. They cut great and when cleaned regularly are awesome. I have tried the Ridge Carbide blade too. It is simply amazing! I’d put it right up there with the Forest WWII!

@sbledstl 2 года назад

Have Diablo on Miter and new table saw. Used Masterforce from Menards on old table saw and still have them on my circular saws. Looking into CMT now. Thanks for the info

@sonne2351 Год назад

to the point! Wow took way too long to find this concise video! Yes beginners don't need all the fluff and as a women I really need to understand the basics.

@marianosaab2560 2 года назад

You're the man, Matt.

@731Woodworks 2 года назад

👊🏻

@ryanlaurenceflores9170 2 года назад

Diablo Blade for me is awesome! 💪

@photoggenes7443 Год назад

Thanks.

@Daniel-li1jt 2 года назад

CMT blades are great. I got a good deal using the discount code. Thanks.

@AMcho 2 года назад

Love the t-shirt!

@tristankayne666 2 месяца назад

So I'm fairly new to woodworking, and the wife bought me my first table saw for Christmas last year. It's the DeWalt with an 8 1/4" blade, and I'm having the hardest time finding a flat top grind blade that isn't thin kerf. Wanted to do finger joints, so a thin kerf blade would be a bad option. Is there anyone out there with any suggestions? I've looked, read multiple comments, followed links, and so far I've been denied. I've gotten a lot of good advice and ideas from this channel, so you were my go-to guy. Hopefully someone can help me?

@lynbbor Год назад

I have a radial arm saw that I picked up used for a really great price. I use that machine instead of putting a dado blade in my table saw. It's so much faster and easier to set and cut half-lap and similar grooves in boards on that machine and avoid the pain of changing the blade on my old craftsman table saw. Anyway, my question is what do you guys use for a FLAT tooth blade? I have a lot of trouble finding a good quality flat tooth blade that leaves a nice clean flat cut without spending $175 for the blade. I tried one of those ATB blades that had a few flat teeth mixed in but that still does not leave a nice clean flat bottom on the cuts. Any suggestions would be very welcome. As always, GREAT video Matt! It's been really fun watching your channel grow over the years.

@jonathane40 Год назад

I have been watching lots of your videos and they are great! I’m about to start learning with a table saw and a miter saw and was wondering if I can use a 10 inch blade on a 12 inch miter saw like the Dewalt DWS779? Since my table saw used a 10 inch blade it would be nice if I could use the blades interchangeably between the Teo machines! Thanks again for such great content!

@RubenHernandez-ub3xg 3 месяца назад

Thanks for your expertise. What would be the best blade to cut butcher block

@todds4101 2 года назад

Great video! I work at a local Woodcraft part-time and most of our customers purchase Freud blades. I tend to push the Freud 50 tooth combo blade if they want an all around "pretty much do anything" blade. Our more serious customers, the ones who make a living with their saws, or are more serious hobbyists, usually go with Forrest blades.

@afpitbull60 6 месяцев назад

What blade(s) do you recommend for the DeWalt DWE7485? Happy New Year!!!

@tales_of_the_crypto1583 2 года назад

Thanks for all the great information. I got a Planer, and Router coming today. I still need a brad nailer and miter saw to get started in my wood shop, I never realized all the difference things you need to know to buy the best tools.

@RoshDroz 2 года назад

Lowes has been selling a craftsman Brad and finish mailer two pack for $59, sometimes down to $29 in store. FYI, that's what I got

@onehappydawg 2 года назад

I’m still using the stock blade that came on my miter saw 😎 😬

@andyboxish4436 2 года назад

I love Diablos because of the price and they are made by Freud, so they are excellent quality

@dragonskeep9142 2 года назад

Thank you so much for this. I got the CMT ITK 50 Tooth 10 In Combination for the table saw and a CMT ITK 96 Tooth 12 In for the miter saw. They have a great sale on them right now that stacks with your discount code. I just have a quick question now though. Going to a thin kerf blade what do I do with my riving knife? Should I make a zero clearance insert and get the Micro Jig splitter set up?

@bigdog51 Год назад

I watch you a lot

@jordansaunders9366 2 года назад

Enjoyed the video! Just picked up a 50 tooth Diablo combo for a new table saw. Been happy with it so far. Side note: How’s that ice down in Monticello? We have 1 inch plus of ice on our driveway in Sheridan.

@731Woodworks 2 года назад

We didn’t get any accumulation here

@Danko88 Год назад

Have you used the new CMT thin kerf blades on your saw stop yet ? I was looking at them trying to decide if I should try one.

@CopperJohnsBeard 2 года назад

Love this; great job my friend!!!

@731Woodworks 2 года назад

Thanks so much!

@idahopete9211 2 года назад

Some higher quality blades have a clear coating on them to provide a "slicker" and less burn cutting as the wood passes thru. Simple Green will often remove this coating. A better cleaner would be something like Boeshield Blade and Bit. Just my opinion. Otherwise I enjoy your videos, keep up the good work.

@d.k.1394 Год назад

I love cmt and diablo

@oldtireman4665 2 года назад

A good reason to go with a lower tooth count blade, especially in heavier stock is the deeper gullet between the teeth. Makes it easier for the blade to remove the chips from the cut. Blade runs cooler, motor doesn’t work as hard. Usually your rip blade will have fewer teeth.

@irishRocker1 Год назад

He says that in the vid. 3:22 he mentions when he might go for lower tooth count.

@williamguzman6037 2 года назад

I like a blade that cuts 😂 Seriously I am following your advice Diablo

@williamguzman6037 2 года назад

How about a video on the best bench saw planer etc.

@PDillz 4 дня назад

I'm curious if you know much about the miter saw blades they have at harbor freight, I've tried to search on RU-vid and I really can't find much details but their pricing is pretty sweet and nice that I can just walk in and grab one if I need it but I don't want to pull the trigger until I figure out at least which one is the best to choose from between Hercules and Bauer or if I should just stay far away from them. I know one of them blue Hercules blades will match my miter saw stand lol

@adamchesis7443 2 года назад

CMT blades are ok, I prefer Amana, I also use Guhdo they're noice as well. I don't use thin kerf they flex too much, don't like the Diablo ones

@39Renne 7 месяцев назад

what do you think about the Spyder table saw blades

@davidahart2476 Год назад

Hi Matt, Got a question that I'm thinking might be a little silly. My riving knife on my table saw has a thickness of .090, the Diablo combination blade has a kerf of .098. I'm thinking as long as the blades kerf is more than the riving knife I should be ok.

@thibault_de_proost 29 дней назад

I'm from europe and in my own big box stores bosch blades are very common, in different price ranges, are the Bosches any good?

@ravenheart1439 8 месяцев назад

Yeah I think most beginners including me don't think about the arbor length because we aren't thinkin bout Datos ya know, me I knew I wanted more then a job site saw so I was lucky the contractor saw I got was fine, or I would have sold it straight away lol....super important for beginners to know this...

@quirtdrozario856 Месяц назад

Love your videos. Always wait for that virtual fist bump.

@731Woodworks Месяц назад

👊

@RonHutcherson-hj3rx 8 месяцев назад

I have the SawStop CTS. I feel it lacks power. What would be the best blade for clean cut on plywood/melamine? I am a hobbyist and not ready for a blade for every cut. Will a Combination 60T with painters tape give me a great cut? Also, what about kerf size? I know thin nerf will give the CTS a little more power but what about blade flex or wobble? Thanks

@user-ch3oj3cy7s 10 месяцев назад

I Have a Dewault 184mm 1,6mm saw. I guess 60T will be too much for what you said. So what would be the tooth count for the same on a 184mm blade?

@joenoe10 2 года назад

I use Freud and Forrest. Both can be resharpened

@starttofinishpodcasting3721 6 дней назад

Are miter bkades and Circular saw blades interchangeable?

@enufots4621 Год назад

Does any of this apply to worm or circular saw blades?

@billboy7390 2 года назад

Carbide Processors Cermet II saw blades.

@michaelstark703 2 года назад

Do you get your blades sharpened when dull? Any recommendations on having that done if so.

@clintonpayne4690 Год назад

What do you recommend on a very tight budget and plus I do this for a hobby not a job

@targus98 Год назад

your awesome, I was wondering if I needed to have several different types of blades or can I get away with three... a thin kirf, combination tooth and flat tooth. I am starting my DIY and will be making furniture, those will help.

@731Woodworks Год назад

Yes, you can use those 3 for most things you'll cut

@darrylportelli 11 месяцев назад

Hi , did you have any problems with any 3rd party blades on a saw stop? I have bought an amana 24 tooth flat top blade and it is a tiny bit smaller than the saw stop by about 4mm ... I got an error code to adjust the brake cartridge so I adjusted it and in order to get the code to go away i had to tighten the screw quite a bit to a point where the supplied yellow gauge of 70 thou doesnt fit between the lower part of the brake and the blade , but a credit card which is 30 thou fits ... Have you experienced this with any blade ?

@joshsoom131 2 года назад

I always appreciate your content, keep up the good work brother! Time to go make sawdust..

@edward_dantonio 2 года назад

Do you sharpen the CMT orange blade when it starts to give poor performance or do you just buy a new blade? How can you sharpen blades? Thanks for the explanation video and the 10% discount code for Taylor Toolworks.

@carasmussen27 2 года назад

I have Freud or Diablo saw blades

@corym2513 Год назад

The only other blade I've used is Diablo. Should I try other brands or honestly they all do the same.

@Leatherface123. Год назад

What kind of sawblade would I need for slicing through 3/4” AR500 steel within under 30 seconds

@archerxo1 Год назад

This is a really concise video. I watched one prior to this and it was so much blah blah blah... I just wanted plain information told to me in a reasonable amount of time.

@leochan7572 Год назад

Thank you for the tips! 6:30 - Dd you actually take selfie with your miter saw when you bought it? :D

@731Woodworks Год назад

lol yes I did.

@robertsmith3518 Год назад

I just bought a WEN Brand off Amazon .All I can say is wow .$14.00 for a 80 tooth 12 inch for the miter saw . First one lasted 5 mo ,on my second ,I tossed the first one away