Hi, you can pair max 4 persons. But you can only talk with 1 friend at a time. Connecting with 3 and 4 is the same procedure. If it not works, reset all the models and start again.
Hi. I think I found a cheaper way to connect 4 people and all can talk at the same time Sena snowtalk 2 What do you think can they fit in a full face hellmet so we can use it in go karts for example? 😊
I my opinion you can bether pay a little bit more. The Sena SMH-5 is much easier to build in and the quality of the micro/ sound is going to be much better! Especially when there is some noise and wind noise such as when karting. Go for the Sena 5! :)
@@waypointleuven1820 Thx for answer. Yes, Sena SMH5 would be OK if there was no need to talk to each other at the same time. SMH5 can talk only to one set of headphones. To talk to the third, you must press the button and switch during racing which is not quite handy when you drive 80 km/h trough a set of 3 or 4 connected fast corners 😊
@@maroonmedia2000 Hi, that is correct. Then you have to go to Sena SMH10 or others. But do you think the soud is going to be good enough with the Snowtalk?
Hi Sam, our video is only for Sena to Sena, but you can follow this for universal intercom pairing like to a Cardo: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X1DkC2e378s.html
Hi, the sena SMH-5 does not have a universal intercom. New versions of Sena do have this, so in principle it should be possible with them. Normally also with the FREEcon, but we have not tested that yet.
I try the smh5 to pair it with my brothers sema the 5rlite and they didn't work. You know how to get intercom pairing i will like to know how they can pair any help is appreciated!
Hello beautiful people 😊 dose anybody know how to pair 3 devices ? We tried it’ll know all RU-vid tutorials, follow the user manual, sw update and so one but without any success. We manage to pair A with B, A with C, but when we tried to add the B in the call, each time came the message “intercom failed, try again later” :(. I will really appreciate if somebody can give me some hints besides the ones that are already available on RU-vid. Possible that our major problem is that we didn’t know how to confirm the request of joining
Hi, the answer is simple. :) You cannot call A, B and C in one call. You can only have 1 on 1 conversations. From the SMH10 you can work with group calls.
