Senton 3s 17mm Hub Conversion 

Awesome! Thank you! I am glad I could help. AJ

Awesome. Thanks for the comment. AJ

That video is in the works, but waiting on delivery of parts takes a bit of time. Thanks for the comment. AJ

It was my pleasure. AJ

We’ve done that same thing with the typhon and it does work but the motor mount on ours needed the 3s version and the diffs for the older Megas are plastic but held up for quite a while. Then there’s the slipper to accommodate having to mod slightly to get it installed for 3s. However, the effort was well worth it in the end. And don’t forget to add the center driveline breaking kit to it. Best of luck on your build, AJ

Bandito MT Belted 3.8" Mounted Front/Rear Tires .5 Offset 17mm Black DTXC5628 There you go. I found these on Ebay some time ago, but they are still available. I love the way they act on the pavement, but I would suggest checking the offset to make sure they fit your car as you would like them to. Also, the wheels are a bit weak, so be cautious in tight, high traction turns. I blew two of them out, and it only blew the hub, not the tires. Perhaps purchase a tougher wheel and then buy "just the tires" and mount them yourself. That solved the issue for me. I hope this helps. AJ

Not yet. Thanks for asking.

For more ground clearance

We are building one with Mojave tires on it. I'm not sure yet how it's going to work, but it will be exciting none the less. Thanks for asking. 😎👍

We suffered no ill effects running them. So far no issues.

@@AJJAMStudios Thank you will definitely try this one out!

My first thought was to use the Arrma Felony "Rear" wheels and tires (107mm rears) for that application. They are similar in size to the stock wheels, and they are wide enough to handle the weight and still get good traction under load. Plus, they are speed rated, so you can gear it up and get a move on with out fear of rupturing a tire and killing your Mojave. For my Mojave, those are the tires I'm planning on using when I take it to the asphalt. I would also recommend lowering the suspension and tightening up the shocks to limit chassis sway whilst cornering. That should get you in the game. If you find better tires for that application, please let me know. Thanks for asking, AJ.

@@AJJAMStudios I thought about those, but they look so much smaller. The 1/5 GRP look to be a better fit, but changing to the square wheel hub gave me pause. I I'll look at the Felony wheels again, thanks!

1:8th

Our local hobby store had them on the wall. They are Red Cat hubs, but I no longer have the part number.

@@AJJAMStudios ahh ok no worries could I maybe fine some that are similar if that's alr

I have a pair of Smax's by Remo that are small and cost me less than $80.00 each at the time of purchase. The rest of my collection is higher end. Thanks for the question. AJ

After testing the part, I will definitely be buying the M2C conversion to see the difference for myself. I was unaware of the M2C upgrade at the time of producing the video. As you suspected, "The cheap ones do work", but there is a bit of slop in the system with them installed. I'm hoping the M2C system is tighter and hopefully stronger. But, as I said, these do work. Thanks for the input. AJ

Are the Arrma Typhon 4x4 3s / 6s BLX dBoots 2-HO Tires the same size at the 3s senton wheels and tires? I want to put the typhoon tires on my senton but don't want to cut my body

Sorry, no link, they came from my local hobby store, but I do know they are Red Cat hubs. I wish I could help more, but I lost the tag for them. Search Red Cat parts and you may be able to find a set.

@@AJJAMStudios thanks I found them on e bay