Service Stabilitrak Service Traction Control Service Brake Assist 2014 Impala Limited 

I am really blown away. God really talks threw us . Thank you so much. I came here for my impala and I got a passage suited for me. It made my wife cry . That is really crazy. What are the odds? I ended up here for abs lights and hear something so deep. A true sign.

very easy to follow along, you explain everything very well and in a timely manner, very much appreciated, thank you

Very informative video. Thank you very much for making it and being very detailed in your explanations. You are very clear and articulate. Have a blessed day!

Thank you for the scripture! Well made video, thank you for your efforts fellow human!

Amazing Dave .. not that I could do this with out a mechanic .. my stabilitrc, ABS light came one after having Cadillac recall on my rear toe link something lol but my regular mechanic said he’s never seen the code that came up when he checked it 🤷🏼‍♀️

Awesome I'm happy to see your message. GOD Bless you and yours

this just popped up for me today on my 2011 impala so of course will be looking at everything you did and see what i come up with

So when the speed sensor light was on did it also trigger your check engine light as well? That’s what mine has been doing. I’ve got harness replacements but I haven’t put them on yet however it’s getting worse.

so when opening connector release lever, open it ALL the way 1/2 circle if you want connector to slide fully out., the EBCM connector has 7 rows of holes(3 noted). the top row are the tiny holes on top of black rectangle that don’t look like proper electrical holes but R, while middle row that do like like elec. connecter holes RNt🤔. the middle row is the lower row of top rectangle(that don’t loook like holes), & lower row is bottom black rectangle. as for you mr video creator, gr8 video, it turns out your pin#s also work, for at least 12 & 13 LT models as well, & your thE only 1 who has put this in a video!, (cudos chEf).. now Y didnt a resistance discrepancy show up for you? & how’d you fix it(for unknown duration) w/heat shrink? from other such videos you’d know, this is often an intermittent situation with Yr’s freying &/or breaking from heat. they brake on inside of actual rubber wire, not visible(& can be found & checked by gently folding wires & if 1+ turns at right angle it’s likely broke or nearly so) - & when you heat shrank it you attached it to itself again for unknown amount of time(could be 🖐 minuts, a kalpa, or anywhere inbetween) but if-reoccurs now you know where-how to fix it. as for all of us, 1st ohm test from plug to hub, proper resistance means hub-ABS’s probley ok, then replug & with ignition, or maybe even -terminal?, disconnected.. go to EBCM connector & continuitity check each circuit.. then, if they all APPEAR to be gud have some1 gently wiggle each wire while watching ohms. & IF NON-A-THAT works, don’t forget the recall that happened for 12-13s., && again if none of ALL THAT hupla wrks, don’t forget 2 Us the 4c, like mr video maker did.. & there-in fixed problem with a spare peice of heat shrink, & 1/10th of a cent of lighter fluid

Did your brakes go to the floor when the message came on ? My Yukon does this when driving and then the brakes won’t work , I turn it off and start it back up and it works fine but I don’t ride cars close because I never know when my brakes are going to give out, I also notice rpms reving more when I start to brake? Pls help

Thank you very much. This video was very informative.

I have the same problem. I have a 2014 limited Impala. It rides smooth the light turns off on his own. But sometimes when I stop or before I turn it stumples. You have any idea or suggestions? The video was helpful the verse was encouraging

I'm having this problem how much does this cost to repair

Interesting video. Thank you for the upload, I was never quite sure what does ribbon looking things were. Makes sense now. When turning right and going over a bump every now and again it feels like my passenger front brake kind of like pulses? Not sure if that makes sense. Wondering if the ABS module activated for a second as a result of the short

Great video!! Thanks for your work!!! God Bless

I’m having the same problem just that on my 2013 impala it’s throwing c0035 and u1827 and I’m wondering if those 2 codes are together.

I have the same problem on my 2014 impala limited and it's only when I make a left-hand turns especially drastically on the acceleration

My 2015 Impala I just bought is having this issue whenever I drive on dry ground, and/or if I hit a bump. I literally took it to GMC, the dealership I bought it from(3x) and now my actual mechanic, just tonight, and it's still happening. It also reduces my engine speed. Idk what else to do but I can't drive like that. It drives me insane!

My stabilatrak system lights turned on after making left turn. Then car shut off and won’t turn back on when try to start it just dead

I have all of these lights on after replacing a hub assembly. The service stabilitrac was on prior but the service brake assist came on a few days after service. Both wheel speed sensor harnesses are just fine. Any ideas?

I had the same problem but pep boys said they fixed it, yet my traction control keep flashing when I accelerate and car hesitate

This is what my car is cursed with , replaced all wheel bearings rotars calipers pads power steering pump and hoses rack and pinion and rewired sensor and just came on again this morning ,2008 Impala SS , spent a kings ransom now I'm done with it !!!! If something pains you soo much , there comes a time to cut it off.

I have a 2011 Chevy impala reduce power is on check engine is on It starts perfectly… I go into drive and my car moves but then it’s like the car isn’t responding to the wheels anymore not even in reverse I push the pedal and it’s nothing but I cut off the car and restart it it’s back working but it doesn’t last long I’ve changed the throttle body (this probably the shiniest part on the car now lmao ) and the acceleration pedal now but notice I was getting more response from the old pedal then the new one. What can be the issue it’s like a sequence with it having to restart it for it to only work but only for a couple seconds also my rpm be moving on it’s on

I have the same issue but my gauge needles start flickering and car barely moves or shift gears

I have all the same lights on as well and my steering wheels is a little hard to turn ..

The traction control on my 2015 impala keeps engaging when accelerating from a stop...on dry pavement when there's no reason for it to engage. Any ideas?

I changed my speed sensor reset battery and I still have the same problem. Message didn’t go away. What else is there to do??

Im having a stabilitrak problem but my abs and my check engine light isnt on.

Did the car shift really hard when u put it in reverse?

God used that passage as confirmation

wow mine just came on after a slight bump. mind me asking what scan tool you used to find which sensor it was?

Thank you for the scripture

Hello I just got one of these when I turn it on when cold there is a grinding but goes away as the rpm sets . Also I hear a squealing on passenger side I already replaced the belt and the tensioner. When i ever I apply pressure to gas pedal there is a slight squeaking upon acceleration. You have any suggestions? Thanks I've also gotten this light while turning slow left at gas station happened twice already . It drives good but I feel like it don't drive as smooth as it should be .

When replacing ebcm does it need any programming?

I have that car and got these issues constantly...

2013 ls impala here. Service stabilatrack 1st cane on. Then service brake assist. Today traction control service, pulled over shut off,after 1mile only. Turned off traction control, engine light came on and door locks popped, gauges stopped functioning. Turned off, tried starting, nothing at all Popped hood, looked around, checked battery, fluids,and all seemed OK. Turned key and started, engine light remained on. Drove home 100 miles. Went to local mechanic, put scan on, have 7 codes fails, reset and some went away with engine light gone. Drives fine. Going back for brakes and further diagnosis. Any ideas!? So very weird

My wire was separated from the connector to the hub. Do i need to replace the entire wire or can i replace the end?

Good prayer 🙏

I have an issue that's prob notbing never seen before so sometimes my car won't start and when it does it says service power steering when I drive it if it stops it shuts off and won't start up again the lights work the windows don't its a sometime thing had it in the mech 5 times no service lights ever came on changed starter..fuse.. alternation battery .... still have this prob from time to time....thinking about taking it to the chevy dealer and see what it is

It is sad how they rob us with bs. Won't even last 50k miles. Mines saying the same thing, and every bump or hump my chevy shakes. No control driving it in the rain. Hou tx, any good mechs? Msg me

Having samw problem, but my car completely stopped and wont turn on

my say engine power is reduced how do I check on it. 2014 Impala

I'm having this issue with my 11 impala

I am having this problem with my car and my car shift hard when I put it in reverse

Hail Satan

Have the problem impala. 2013 sold the car , solve the problem