No video :(

Serviced Lawnmower Won't Start- Here's Why

Подписаться 34 тыс.

Просмотров 26 тыс.

50% 1

For All Spares And Service Items For Your Mowers, I Use And Recommend This Website tidd.ly/47Sy8oT
In this video, I show what to do if you service your lawnmower and it still won't start, here's a checklist of what the problems could be.
Lawnmower Service Manuals Download Here www.shareasale...
Check out this playlist for 100s more videos like this. • Briggs And Stratton La...
Please support the channel here www.paypal.com...
My favourite lawnmower of 2021 geni.us/5bABm (paid link) As an Amazon Associate, I earn from qualifying purchases
NGK spark plug (most Briggs Engines) geni.us/0B5dS (paid link) As an Amazon Associate, I earn from qualifying purchases
Spark plug socket/remover geni.us/6PUjTjB (paid link) As an Amazon Associate, I earn from qualifying purchases
Spark plug tester geni.us/vwa0
NGK Box of 10 spark plugs geni.us/rF7KU (paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs Diaphragm and gasket. Genuine parts that actually work. geni.us/PAhPj (paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs governor springs 35 Classic geni.us/sEH1
Briggs 35 Classic Carb genuine geni.us/E4Rn (paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs carb new style geni.us/5ZYWA
SV150 Carburettor geni.us/ELFqcJ
Briggs petrol cap. geni.us/MdCSj0 (paid link) As an Amazon Associate, I earn from qualifying purchases
Briggs Primer Bulb geni.us/o0ARomD
SAE 30 Lawnmower Oil geni.us/AQnvoAY
Briggs Classic air filter geni.us/xGHx
Briggs 35 Classic ignition coil geni.us/LaYz (paid link) As an Amazon Associate, I earn from qualifying purchases
Pull cord rope 100 Metres geni.us/mO4wX (paid link) As an Amazon Associate, I earn from qualifying purchases
Pull cord handle geni.us/PxEif (paid link) As an Amazon Associate, I earn from qualifying purchases
Carb spray geni.us/1PGAI (paid link) As an Amazon Associate, I earn from qualifying purchases
Karcher K2 Pressure Washer geni.us/GEqboBA
Ultrasonic cleaner geni.us/7tWfGK
Air Compressor geni.us/98Gyqi
Bench Grinder geni.us/rFbPXSc
Blade balancing tool geni.us/5zqJt
Woodruff (Crankshaft) keyways geni.us/KZJYEm2
Wire Brush geni.us/K60a
Oil extractor geni.us/qAKBB
Ryobi Impact Driver geni.us/zsPR
Clarke Impact (very powerful) geni.us/jAHzde (paid link) As an Amazon Associate, I earn from qualifying purchases
Clamps geni.us/14Atk (paid link) As an Amazon Associate, I earn from qualifying purchases
100 piece Socket Set geni.us/1BN5otc (paid link) As an Amazon Associate, I earn from qualifying purchases
Screwdriver set geni.us/rza1CI
Magnetic parts tray geni.us/YQXNt
My Video Camera geni.us/diYLt9
WD 40 geni.us/ADykd
Here's a link to my second channel • Get Thick Snow Foam Wi...
Royalty-Free Music Provided by Paul Stamp. • Alphatronic- Totally R...
(paid link) As an Amazon Associate, I earn from qualifying purchases

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@ArtFarkle 15 дней назад

Thanks a lot for the really informative video. I had serviced my engine but it still wouldn't start. Your advice regarding the kill switch was the key. Adjusted wire till pad was lifting clear and away it went. Thanks so much for taking the trouble to help duck eggs like me!

@Mike-oh5jk Месяц назад

Couldn’t find any decent videos in German..! After a while I found your videos which helped me a lot 😀 Thanks for that and keep up the good work 👍🏻 Greetings from Germany, Michael

@owdred6314 Год назад

Welcome back young man, thanks for the troubleshooting video. I’ve just repaired a mountfield like yours. The owner had tipped it on its side to clean underneath and the petrol was black with oil. carb and tank clean job done. Started repairing after watching your earlier videos thanks 👍

@MowerMan Год назад

good luck!

@petewilliams5517 Год назад

Great video and as you do ignor the rude messages explained perfectly thanks 😊👍👍

@MowerMan Год назад

Cheers Pete!

@christiangeiselmann Месяц назад

Thank you. I have watched quite a lot of videos to learn about maintaining this type of engines from different creators, and your video is clearly one of the best. Clear, focussed, good audio and video... I will be happy to watch more.

@themowerman Год назад

Jammy Dodger.... Does life get any better... Yes.. a video from the mower man himself...

@alanmarton9409 Год назад

Good video refresher...I don't mind biscuits , pressure cleaners or black cats 🙂

@MowerMan Год назад

Thanks Alan!

@alandobb950 Год назад

Hi, glad to find an up to date video, Ive watched your videos from way back when, in the last 3 months, since my neighbour said his mower was broke and he was getting a new one. I asked what he was doing with the old one, he said it was for the scrap man, so I said I would have it. Thats when I came on RU-vid and found your videos (thankfully). Its a Qualcast with the Briggs & Stratton engine, so, after watching your video on changing the diaphragm & gasket, then about the Govenor springs, I put the new diaphragm & gasket, changed the govenor springs, new fuel, new oil, it started on the 3rd pull. I was hooked, I fetched our grandsons from their mothers, at the gate was an Einhell petrol mower, after asking why it was there, again, for the scrap man, she said it wouldnt start, I asked if I could have it she said yes, when I got it home, I started at the beginning, pull the deadman, listen for the micro switch, no sound of the switch making/breaking the circuit, I looked & noticed the lever wasnt lifting the arm high enough to make/break the contact, I bent the lever up slightly, contact made/broken, although I didnt know how old the fuel was, the oil was clear & up to the level, so it hadnt done much work, a couple of pulls & it started, brilliant. So, with someone without any mechanical knowhow, after watching a few of your videos, 2 non working mowers now both work perfectly well. So, I would like to say a big thank you for sharing your knowledge & all those viewers of yours, give it a go, if its broke, have a go at fixing it, iif it doesnt go when youve tried, at least you had a go & it was broke anyway. Sorry Ive drooled on but as I said, I wanted to thank you for sharing & please keep the videos coming. Ive subscribed & always give a thumbs up.

@MowerMan Год назад

Awesome nice to know I could help. Well done!

@andrewsmith7287 Год назад

Started watching you videos years ago always good content thanks

@leshill7647 10 месяцев назад

Cheers I have taken the responsibility of servicing my bowling clubs mowers / strimmers etc and found your videos very helpful. Thanks again.👍

@Bargle5 4 месяца назад

Thanks for the list of possible problems. My mower quit running while mowing and I couldn't figure out why. I've rigged a separate kill switch. To do this required me to disable the grip handle kill setup. I wired the piece that kills the ignition back. The last time I was mowing, the piece I had holding the pivot piece back broke and fell off. I hadn't thought to check that. Your list reminded me and sure enough, there was the problem. Got it held back again and it started on the first pull.

@GeorgeLennon100 3 месяца назад

15:54 this is what happened to my triangle but it was turned 180 degrees in the opposite direction. I couldn't stop it from having a very high idle until I noticed it and now is running perfectly.

@chrissarson5113 4 месяца назад

Thank you after watching your video it put me right and solved a big problem I now have a good idea on what I'm doing with more comfidence

@Telrynn 25 дней назад

Hi Ive just inherited a mower with this same motor which was running fine but now cuts out after about 4 to 15 seconds after starting... It is an old and dirty machine that needs some love so after watching a few videos and setting to stripping off the tank and draining the oil to get to the cooling fins the tank doesn't come free of the manifold and the manifold pulls out about 2 inches or so any advice would be appreciated as i didnt want to pull it too hard and break something internal. Cheers for the content your videos have been a tremendous help so far.

@rodfulford4306 Год назад

Good to see you back on. A stupid thing that I did 2 years ago was to get some fuel in a proper can from a garage filled the mower and it would not start, eventually after stripping it all down I realised it smelled wrong, I had bought diesel. Now beware not all diesel pump pipes are black, the super diesel was green like the petrol one. Had it been the car it wouldn't have fitted but it did in the can

@MowerMan Год назад

Thanks for the heads up!

@lord.onk99 Год назад

Missed you, welcome back.

@tinkeringtaylor3053 Год назад

It's great to see you back mower man, really good video

@MowerMan Год назад

Thanks! I appreciate it!

@ronaldmaxwell4579 Год назад

Good to see you back,greetings from Northern Ireland

@MowerMan Год назад

Thanks Ronald!

@mhemsley2366 Месяц назад

Brilliant video, really helpful. Many thanks. 👍

@taz6122 3 месяца назад

"sometimes called the magneto" not sure who does that, the magneto is part of the flywheel, not the coil

@geoffwilletts4683 7 месяцев назад

Great video thank you. Very useful when removing the carb especially the spring positions.

@MowerMan 7 месяцев назад

Thanks Geoff

@richardhetrick4770 22 дня назад

In England go you have e20 gasoline. You need to use stable with your gasoline. I use 85 octane aviation gasoline the faa forbid ethanol in aircraft engines

@jeremythorburn9977 3 месяца назад

Many thanks for your informative, clear advice, please keep it up , learnt soooo much from your videos !!!!! 🎉😊😊😊😊

@MowerMan 3 месяца назад

Always nice to hear! Thanks

@philipnewton7942 11 месяцев назад

Paul Great video mate lots of useful tips easy to understand saving us money on a 2 stroke mower is ghe engine oil the same to add to the fuel mix Phil in stoke 😂

@meyou3064 Год назад

Hi so pleased to see you have returned, would you be able to offer me your advice and guidance ? I own a Mountfield SP485 HW V I am not happy with the performance of the existing mulching blade it does not cut well and I don't want to have to mow my grass several times to shorten it down each time I cut the lawn just to get the blade to work, also the grass pick up into the basket is not very effective. I would like to replace it with a normal cutting blade ! from what I can gather there is not an option for me to be able to do this ! which I find hard to believe can you help or will I have to replace my mower ? Thx

@rich1234ish 5 месяцев назад

Ta very much,the black and white washer tip appears to have solved my problem. Quick one,what's best way to tip mower to get access underneath to clean blades and not upset oil or petrol?

@MowerMan 5 месяцев назад

Extract it

@doloresesparza2952 2 месяца назад

The screw for my filter cannister does NOT tighten into anything--- just spins and with motor vibration, the filter flopps around and is NOT doing what it should. I have gotten New screw and still doesn't tighten into anything. I have tried to make sure that the screw hole is NOT plugged with debris, and it doesn't seem to be the issue... Any advice?

@simracingcentral10 29 дней назад

Hello there! About to try to get into this kind of business where I've found a £20 McCulloch Mower with a Briggs 35 Classic on it, so if you don't mind, I have a few questions. Is buying non genuine parts like foam air filters, governer springs, diaphragms, gaskets and so on OK? And do you have any other tips for starting off? Many thanks! 😊

@Daisy.florina 6 месяцев назад

What do you think ? mine was working fine until I refill after moweing and started to loose power, until it stopped and no power and surge I changed to fresh fuel and it is still the same, thanks

@ParalexJ 4 месяца назад

Hi MowerMan, Great video, I have also used your video on the diaphragm service and it was wonderful. I bought a second hand mower around 12 months ago and I haven't serviced it ever, on the first 10-20 seconds of start up after replacing the diaphragm, spark plug and air filter, it does the hesitant high rpm > low rpm cycle and then levels out to a consistent speed and mows fine. Could this happen as a result of lack of oil change? (P.S I am popping down tomorrow to get some fresh oil and petrol for it) Cheers!

@MowerMan 4 месяца назад

Make sure the springs move freely

@ParalexJ 4 месяца назад

@@MowerMan Thank you very much, I'll have a look to confirm tomorrow. Have a nice night.

@jimryan5724 Месяц назад

Very interesting

@tyjordan444 Год назад

Mowerman. I need some help with a mower. It's a husqvarna lgt48dxl with a kholer 7000 series 25hp. As soon as I start the mower it sounds like it is going to explode with how high the rpms are. I replaced all the springs in the linkage and installed a new governor, cleaned the carb. Set the govern and still no change. I'm at a loss. Any ideas would be greatly appreciated. Thank you.

@suzys4316 Год назад

Hiya, thanks for all your video, a few years ago I watched one and was able to service my own mower from that, but now I seem to have the revving problem, its a mountfield SP530 with a briggs and stratton , is there any advice you can give me please, also when I used the last of my oil, I threw the old bottle away, and now I cant remember if it was 2stroke or 4 stroke I used, thanks for any advice you can give , also will the governor spring you have the link for fit my mower many thanks regards Suzy

@burnsy1426 9 месяцев назад

Whats the shaft size for a 35 Classic? I want to put a 500E series engine on a 35 classic mower

@mattlaverty2241 Год назад

Hi mate. I just did a service on my mowers carb. It's started but seems to be running a little rich. I mean faster than it was. What would you advise?