No video :(

Set Up: EtherNet/IP to Modbus TCP Gateway

Подписаться 19 тыс.

Просмотров 29 тыс.

50% 1

This 5 minute training video takes you step-by-step through actual screen shots for the setup and configuration of the EtherNet/IP to Modbus TCP Gateway (PLX31-EIP-MBTCP)(PLX32-EIP-MBTCP).
EtherNet/IP to Modbus Gateway Product Page: psft.com/A21
Modbus & Modbus TCP Solutions from ProSoft: psft.com/A20

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@rickberrey1642 5 лет назад

Thanks for the clear and clean video! really makes this easier

@wandersonpereira9884 2 месяца назад

Hi guys. Do you have a video showing how set up a SLC 500 to read data from a PLX31-EIP-MBTCP and a PLC as a MB Server?

@prosofttechnologyinc 2 месяца назад

Hi there! We don't, but your regional tech support team can help with this: www.prosoft-technology.com/Services-Support/Customer-Support

@kevinpena105 2 года назад

Hi, i'm having an issue with the PLX32-EIP-MBTCP. It always shows 0 at Current Cmd in the diagnostic page and the comand errors keep adding up. I had to put a 0 in the Serv Port because if i put 502, it'd start showing error -33.

@prosofttechnologyinc 2 года назад

Hi there! Our tech support team will need to discuss with you to help. Please contact your regional team: www.prosoft-technology.com/Services-Support/Customer-Support

@seimela 2 года назад

hi i need a gateway that will translate from ethercat to Modbus TCP/IP servo drive

@obliviousal5320 5 лет назад

I have a problem, I got new PLX MBS4 and tried to connect to Ethernet on my computer but always says cable unplugged. I tried p2p and crossover Ethernet connection but same

@prosofttechnologyinc 5 лет назад

Hi there! Please call our tech support team at 661-716-5100 - they'll be able to help you resolve this issue.

@chocloso 3 года назад

How can I do a Factory Restore for a MVI56-PDPMV1 module?

@geraldsanders9232 3 года назад

There really is no 'Factory Restore' for that module, and, indeed, for most ProSoft Technology modules. The only thing you can do to put them back to the way they were from the factory would be to add a new MVI56-PDPMV1 to the modules in ProSoft Configuration Builder (PCB) and then download that new, default setup to the module. This is the way they come 'from the factory' before you download your specific changes to them. This is the only "Factory Restore" you can do. Jason Sanders Senior Technical Support Engineer ProSoft Technology, Inc.

@chocloso 3 года назад

@@geraldsanders9232 thank you!