Setout using Emlid Reach RS2

Подписаться 1,2 тыс.

Просмотров 17 тыс.

50% 1

This video provides an introduction to Setout using an Emlid Reach RS2 base station and RS2 rover with the Reachview 3 app.
This was filmed during real work for a client, who is rehabilitating a tailings' storage facility at an abandoned tin mine, inside the Wet Tropics World Heritage Area, and adjacent to the Great Barrier Reef World Heritage Area.
Emlid Reach RS2 have been instrumental in:
• establishing benchmarks using static observations (RINEX post-processed with AUSPOS)
• conducting RTK survey of Ground Control and Quality Check points for aerial photogrammetry surveys
• collecting RINEX logs for LiDAR and Photogrammetry PPK workflows
• collecting terrain surfaces to inform engineering redesign and volumetric calculations
There have been a few queries about the quick release mount shown in the video at around 2:30. The chapter marker below should link to that. The Quick Release Mount is a non-rotating mount available from Map Gear www.mapgear.com.au/product/qu...
00:00 Start
02:30 Quick Release Mount
0:3:17 Stake out on site
Subscribe for alerts - we'll be making more detailed videos using this equipment, handy tips and more!

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@gilbertocosta6387 2 года назад

Great tutorial! Thanks for sharing knowledge and tips!

@Max3Design 2 года назад

Excellent Video Alistair, Greetings from Mexico!

@shahayazkhan7308 2 года назад

Amazing GPS I would love to use it.. Alistair sir is the best person.

@Map-Gear 2 года назад

You might enjoy our most recent video about the Triangl External Antenna Kit - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AuGeaHzz6No.html

@CR3DT Год назад

I love your truck!

@MangoesmappingAU Год назад

Thanks - we do to, especially since we did the new drivers seat upgrade! We are thinking of doing a walkthrough video showing how we set it up - anything you'd like to see?

@harshithgowda9885 2 года назад

Is it advisable to purchase emlid or go for trimble/topcoat gnss receiver w.r.t 1 pricing 2 accuracy 3 user interface n workflow

@BERNARDIN_1986 2 года назад

Great video. Did you set manually the position of the base? Or you set a base point before (measuring a few hours and then using a PPP online service).

@BERNARDIN_1986 2 года назад

Do you work with relative or absolute coordinates?

@MangoesmappingAU 2 года назад

Hi Marcelo - we established our own base control point. We have a more detailed article on the Map Gear web store blog here - www.mapgear.com.au/setout-using-emlid-reach-rs2-gnss-receivers/

@BERNARDIN_1986 2 года назад

@@MangoesmappingAU Thank you so much, your link was exaclty was I was looking for. I wish I could travel to Australia and do some work with you just to learn and then bring some "know-how" knowleged to Chile.Meanwhile I'll keep watching your videos and reading some tutorials.

@jamiegoosney 2 года назад

Excellent tutorial. Do you have a workflow available?

@MangoesmappingAU 2 года назад

Hi Jamie, we haven't created any workflow documentation at this stage. Emlid have excellent online documentation and tutorials on their RU-vid channel for Reach devices. Read product tips and case studies on the Emlid blog.

@raymondokyere4040 2 года назад

How did you import the coordinates ? Or they were existing jobs

@alistairhart9908 2 года назад

Hi Raymond, I generated the coordinates in my GIS software and exported them as a CSV. Using MS Excel, I then modified the format of the CSV document to meet the requirements from import into ReachView3. Check out this helpful video from @Emlid - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E0TX5h7sOR8.html TIP: Remember that the points need to have the headers of the columns in English, and they must be literally: "Name, Easting, Northing, Elevation". If you have additional columns, you will need to edit your data to remove those prior to import. Once you get the hang of it, it's really straightforward! Email me at hello@mangoesmapping.com.au if you would like a sample dataset to use as a template and to work from. Cheers, Alistair.

@postiveminds9864 2 года назад

It has 182 channels while other brand have more than500 channel .does it affect accuracy

@MangoesmappingAU 2 года назад

The RS2 has 184 channels, and according to the Emlid's specifications in PPK mode has a positioning accuracy of H: 5 mm + 0.5 ppm & V: 10 mm + 1 ppm. While more channels may provide additional accuracy, the improvements could be very subtle depending on your scenario. To double check - we contacted Emlid's technical team and their response is.... "182 channels is more than enough for obtaining the cm-level accuracy. The additional number of channels don't really affect the accuracy. In reality, 500 channels are seldom used fully, so the difference in the end result is negligible." I hope that helps!