No video :(

SETTING OUT #14 - How to mark a line with Leica TS15. Robotic Total Station 'Reference line' program

Подписаться 20 тыс.

Просмотров 12 тыс.

50% 1

SITENG - Setting Out #14 "Leica TS15-Reference line". In today's video you will learn how to use a reference line program working with Leica Robotic Total Station (Leica TS15). It's a step by step guide on how to mark the lines using your EDM.
Welcome to SITENG channel. Here you will find all you need to know to be a good setting out, site engineer. All in 5 sections: 1.Setting out 2. Construction Drawings 3. Autocad 4. Structure 5. Construction Site.
JOIN the best engineering community 👍👍👍 SUBSCRIBE NOW!!! 👍👍👍
leave the THUMBS UP!!! Follow the LinkedIn page 😁
LinkedIn: / siteng
/ greg-stepien-7346ab183
Subscribe: www.youtube.co...
JOIN the best engineering community 👍👍👍 SUBSCRIBE NOW!!! 👍👍👍
leave the THUMBS UP!!! Follow the LinkedIn page 😁
LinkedIn: / siteng
/ greg-stepien-7346ab183
Subscribe: www.youtube.co...
👷‍♀️👷‍♂️ EVERY GOOD CIVIL SITE ENGINEER MUST HAVE - watch the VID 👉 • 10 MUST haves for CIVI... - items I use and recommend 😁
SAFETY BOOTS-choose your size ⬇️⬇️
👉 amzn.to/3NfjUCJ
👉 www.screwfix.c...
TAPE MEASURE ⬇️⬇️
👉 amzn.to/3xQ3cEf
👉 amzn.to/3xZ9ykM
TAPE HOLDER ⬇️⬇️
👉 amzn.to/3NzLDOV
👉 ffx.co.uk/prod...
CALCULATOR - sometimes you can also find them in Supermarkets half price 😁⬇️⬇️
👉 amzn.to/3u2hHE6
DRAWING FOLDER ⬇️⬇️
👉 amzn.to/3NqYoeA
👉 amzn.to/39OUNZP
NOTEBOOK - get whatever really to take some notes 😁⬇️⬇️
👉 amzn.to/3HQkbLx
PENCIL - 0.7mm - good price, but for this colour 😁⬇️⬇️
👉 amzn.to/3OlvwW3
PENCIL - 2mm ⬇️⬇️
👉 amzn.to/3QHVIff
JOINER'S PENCIL ⬇️⬇️
👉 amzn.to/3xRIaFl
TIPP-EX - these are the best I used ⬇️⬇️
👉 amzn.to/3QNrKGH
PERMANENT MARKERS ⬇️⬇️
👉 amzn.to/3ykpcZv
CHALK LINE ⬇️⬇️
👉 amzn.to/3A0aUOY
👷‍♀️👷‍♂️TRY TO GET THESE ON SITE BEFORE YOU BUY 😁 👇
RETRO TARGETS - Tell your senior engineer, or PM to order these and they will. It’s sometimes the waiting time…⬇️⬇️
👉 amzn.to/3NkSsnh
STRING LINE - These will do. You can always get a one on reel, or with a handle. The thicker the better really, but don’t go crazy of course 😁 ⬇️⬇️
👉 amzn.to/3u08bkB
SURVEY BOOK - They should have these on the site, if not tell them to order 😁 ⬇️⬇️
👉 amzn.to/3HSLGUv
👷‍♀️👷‍♂️FEW EXTRAS I USE TOO 👇
SMALL SPIRIT LEVEL - you can always borrow from a Chippie if needed 😁 ⬇️⬇️
👉 amzn.to/3OEXs79
KNIFE ⬇️⬇️
👉 amzn.to/3HQKUrl
GLASSES - Despite you will get safety glasses, on some sites they’re really low quality and I don’t want to get my sight worse using them. Fortunately it’s a rare situation :)
👉 amzn.to/3nawPeN
👉 amzn.to/3yhMMWM
GLOVES - I got them first on one of the jobs and I use only these from then 😁⬇️⬇️
👉 amzn.to/3bvldjC
#siteengineer #constructionuk #civilengineering

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@ongames9063 16 дней назад

thank you you are really a life saver

@SITENG 16 дней назад

Great to hear that! All the best!

@ng2764 3 года назад

We want more videos.....maybe some tricks with 3D line.....cad files inserted in ts..... You are a very good teacher! Thank you!!! 😀😀😀😀

@SITENG 3 года назад

Hi NG! Thanks! There will be more. I am starting now Construction Drawings series where I will explain more and more :) CAD will be next one, but be patient please.

@ionelt3123 3 года назад

Keep posting your videos are interesting good luck and a large number of subscribers.

@SITENG 3 года назад

Thanks for comment Ionel, beggining of October starting new series so there will be more vids and do all my best to keep it regularly this time :)

@user-mz5ty8wk7n Год назад

Great lesson learned from you

@SITENG Год назад

Thanks!!

@robinsheridan3951 3 года назад

Hey I just finished this series, thank you very much. great info, great editing. Best of luck!

@SITENG 3 года назад

Hi Wickstead! Happy you liked it, I hope you will enjoy new vids :)

@TheMrasimqureshi 3 года назад

Greg, Absolutely stunning videos for the people like me who want to jump from the manual Leica to Robotic Leica and your videos are very educational and very down to earth material with simple clear crystal explanation. You used the map to set the Reference Line on your Controller and which is fine. I wanted you show me if you have the coordinates of the line and you then set the Ref. Line for work using the coordinates from your memory on board. On the manual Leica this is how it is done but the coordinates are drawn out of the memory to fix the Ref. Line. I am assuming that you can do it the same way on TS15. But a demonstration would have been a diamond cut education. Fantastic video and a great education material. And........ why are you stopping making more videos in this setting-out series? You could have shown the following. 1: How to measure the height of the building or the tree? 2: How to set the circular arc and the offset line from the circular arc? 3: How to measure the AREA of the land on the set program? 4: How to measure the VOLUME of the earth mound? 5: How to set the Batter Rails. Hopefully you will cover them in future videos.

@SITENG 3 года назад

Thanks Asim! Very happy to hear that :)

@500label 3 года назад

GOOD EXPLAINATION KEEP IT UP

@SITENG 3 года назад

Thank you , I will :)

@arababaian9047 Год назад

Need more video about leica s15

@SITENG Год назад

Hi! Watch my other vids please, there is enough knowledge to start 😁

@asujatta4018 Год назад

Yes bro engineer I love it

@SITENG Год назад

Happy you love it!

@ebrahimmirmohammadi2315 3 года назад

Hi Greg, thank you for amazing videos. I am a graduate civil engineer and aiming to get a career as a site engineer, not sure with the new situation how much chance I have with out experience but your videos are being very helpful. I saw the video for introduction to drawings but have not seen any videos to follow up as you have mentioned in the video you will go through a lot of stuff to do with drawings. I would appreciate to see them too. Thanks a lot.

@SITENG 3 года назад

Hi Ebrahim! Despite situation there is still busy in construction, but the sooner you find something the better as many project are held, or stopped. I think we will see a big slow down next year(especially residentials). Soon I will start to upload construction site vids and construction drawings which will come one after another giving the view of elements and than cover in terms of drawing information :)

@ebrahimmirmohammadi2315 3 года назад

@@SITENG Thank you Greg for reply, All the best. I'll be expecting more videos! :)

@SITENG 3 года назад

@@ebrahimmirmohammadi2315 Begging of October the latest I will start to upload site videos and drawings series as well :)

@ebrahimmirmohammadi2315 3 года назад

I can’t wait for them thanks a lot for the effort mate! :))

@tonnag7588 3 года назад

Hi, thank you for your videos. Could you make videos at your real construction site by showing how you set out plate bolts, foundations, footings, drainage etc. Thank you

@SITENG 3 года назад

Beginning of October the latest I am starting construction site series videos so that will be exactly what you ask for :)

@stephenedwards7995 2 года назад

Greg. If you are marking accurate gridlines on a poured slab. How do you do this? Do you take the prism off the large pole, and fit a small point to it, like a regular prism? Or do you mark a point by the laser pointing to the line?

@SITENG 2 года назад

I would probably use a laser in this case, but if you have a small 'rod' that would be good with the prism too. I would still prefer the laser anyway to make it as perfect as possible, but it all depends what access you have etc etc

@lessismore83009 3 года назад

I'm managing the restoration of an old building that requires pilling an underpin. I've set up a local grid an stuck retros around the building to monitor any movement whils the foundation works begin. What's your thoughts on using a 5second instrument an not a specialist montoring station?? Great vids by the way 👍

@SITENG 3 года назад

I think it's enough, I am using 5sec. instrument and if there would be monitoring needed I would have no problem with that, unless the client has some requirements. If possible monitor the points from same position :) Thanks!!!

@lessismore83009 3 года назад

Thanks for your reply, no client requirement its just a personal preference really. Same point makes sense cheers

@unomoarecare4392 3 года назад

Fuck seak Greg, I didn’t know you got a channel 🙌😄. Good luck with that anyway..!

@SITENG 3 года назад

Hi Gabriel! I wanted to show you guys when it'll be more developed :) BTW don't forget to subscribe ;)

@dondito90 3 месяца назад

I wish u show the screen when u do "power search right" because i couldnt find it in my ts15. I found only "joystick" by which i can only rotate instrument manualy right or left :/

@SITENG 2 месяца назад

I will do for this weeken, will add a short video 👍

@SITENG 2 месяца назад

💪 Power Search Button 🏗️ Leica Total Station 👷‍♀️👷

@vikasrajput6191 2 года назад

Hlo bro.keep it up.i inspried to your work

@SITENG 2 года назад

Thank you Vikas! 👍👍👍

@mrmightyz6501 3 года назад

Hi mate, I’ve been using the TS06/07 model for about 2 years but I have found a new job and they need someone that can use the robotic EDM. Would it makes sense to take the job without having prior use of TS15 and the likes. Many thanks.

@SITENG 3 года назад

Hi! Hard to say really, it's not difficult like you can see on my videos, but good to have at least a bit of practise. Will you be the only engineer there? What kind of job that would be?

@mrmightyz6501 3 года назад

@@SITENG Yes I will be the only engineer there, and it’s a groundwork’s job mainly pilecaps and drainage.

@SITENG 3 года назад

@@mrmightyz6501You can always try as you have experience, but you know how it is when it's busy and you would struggle with the EDM. You will be working with Leica?

@mrmightyz6501 3 года назад

@@SITENG Yes I absolutely understand, and yes they need someone that can use Leica TS15.

@SITENG 3 года назад

Sorry for late answer :) I hope you made a decision, let me know.

@sujithpayyanur9624 Год назад

What is a stake line?

@SITENG Год назад

You can stake the line, or measure to line. Staking the line is marking the points where you can also set the increment you want to stake on the line. You can use is just to set the line as well.