Тёмный

Setting up CT clamps for grid load and solar Pv output pylontech batteries 

Pylontech Solar Panel Battery Storage Installation
Просмотров 9 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 13   
@leeebbrell9
@leeebbrell9 Год назад
Correct up towards meter when wiring coming from main supply, point away from meter if being installed on wire between meter and fuse distribution board
@philipwood123
@philipwood123 Год назад
Hi. I have micro inverters. so all AC NOT DC. The PV CT clamp should go around the live, 240V, of the panel inverters with the arrow pointing towards the panels? so awa from the Consumer unit? thanks
@pylontechsolarbatterystora3979
Yes
@mkay6089
@mkay6089 Год назад
Ok i am lost, you said the voltage is coming FROM the meter.. then the sound cut out a bit. So the CT clamp arrow goes with the direction of flow of electricity from the meter.....or against it? ( it is for a zappi) Cheers
@pylontechsolarbatterystora3979
It goes against the flow , not following the flow
@MikeIOW2
@MikeIOW2 Год назад
We have a Zappi and solar....& both are seen in the MyEnergi app We now also have Pylontech batteries. How can we add a CT clamp to that so the MyEnergi app sees it? (Sparkies failed to install as requested originally, & are now....less approachable.....)
@avtarkataria6456
@avtarkataria6456 Год назад
Hi we have a zappy charger with ct clamp and also solar ct clamp should they both be on the same meter tail coming from the meter tail load side ? Thanks
@pylontechsolarbatterystora3979
No the solar ct clamp should be on the solar positive load side
@avtarkataria6456
@avtarkataria6456 Год назад
@@pylontechsolarbatterystora3979 thank you for your advice.
@SpacePodCommander
@SpacePodCommander 2 года назад
What energy meter are you using? Mine doesn’t t have a directional ct clamp so reads the same which ever way it is connected
@pylontechsolarbatterystora3979
@pylontechsolarbatterystora3979 2 года назад
Its a conventional digital type electric meter. My setup has a directional CT clamp with a arrow on it , to make sure its pointing the right way
@leeebbrell9
@leeebbrell9 Год назад
Can you show wires and layout for solar ct clamp
@pylontechsolarbatterystora3979
CT clamps . One goes on the AC meter side , AC coming in on the Live wire to monitor Load in house , the other CT clamp goes on Live of PV in, so you can monitor the power generated by the solar panels. Ok. Thanks for subscribing.
Далее
Ледник 1:0 Мужик
00:53
Просмотров 1,5 млн
How I stopped my Zappi draining my battery
19:54
Просмотров 14 тыс.
Understanding CT coils and battery settings #Sunsynk
5:26
How To Force Discharge Your Fox Ess battery Storage
16:06
Ледник 1:0 Мужик
00:53
Просмотров 1,5 млн