Setting up the Devil Forge Furnace

Подписаться 25 тыс.

Просмотров 14 тыс.

50% 1

John from 'To the garage' sets up his 'Devil Forge Furnace'
Installing the burner, piping up the gas supply, lighting it, first runs through to running in the crucibe and adjusting the burn.
Links to current prices on Amazon
Weed burner
amzn.to/2Ij2EOT
Devil Forge 10kg furnace.
amzn.to/2EtgTOy
“When you click on links to various merchants and make a purchase, this can result in this channel earning a small commission when you make qualifying purchases. Programs and affiliations include, but are not limited to, the "eBay Partner Network.” and the "Amazon affiliate network" Using these links does not increase the price that you pay in any way

Авто/Мото

Опубликовано:

14 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@footrot17 2 года назад

Ahhh left hand thread!!! Bloody hell I thought I was losing my mind

@ToTheGarage 2 года назад

🤣👍

@stillhere007 2 года назад

Thank you for talking us through it step by step

@TrevorHeathPhotography 5 лет назад

Now that was cool to watch, very exciting. I think this excites man at a primal level, playing with fire is strangely satisfying. Even more so when you intend to create extreme temperatures and melt metal! Nice one!

@ToTheGarage 5 лет назад

Couldnt agree more Trevor. My house has double glazing and a really effective central heating system. That didnt stop me installing a wood burner though!👍🔥Explosions and molten metal in the next episode Trevor so hang onto your hat my friend.

@michaelnagel2557 8 месяцев назад

So everyone knows you want to apply a refractory cement to the insulation of any furnace, to help prolong the life of the furnace and keep toxic fumes from comming off the insulation, granite it is not much it is enough. It is very easy to apply. The product provided with the furnace works but a 3000°f refractory cement will last longer

@americasfavoritehoarder 4 года назад

Thanks

@revenant-knives 3 года назад

My devil forge came today not sure what gas bottle to get is the thread 21mm

@derricknorris7493 4 года назад

Concerning the regulator, the knob in the center adjusts propane flow? Where about should the meter read?

@Wheres-Wolfie Год назад

It depends on what you're melting..08mpa Aluminum .1 mpa silver .12 copper/gold. I have a 4kg devils forge and melted all these metals I listed beside gold but copper and gold have the same melting point. Hope this helps

@spacecasejlp5373 4 года назад

Did you have to apply any tape during the setup? And I'm making guesses at some of my setup since I've never done any of this before and you skipped steps. Also. Do you need a temperature gun?

@ToTheGarage 4 года назад

No tape used and the temperature gun is nice to have but not necessary. Just warm it up relatively gently the first couple of times.

@Ducesweden 4 года назад

I'm gonna do my first run tomorrow and dry it out.- I'm just curious, is it steaming as the moisture leaves and when it's not steaming anymore it's ready?

@ToTheGarage 4 года назад

Ducesweden. You may see a little steam, but it changes colour / shade slightly anyway so you will pretty much know when the moisture has been pushed out.. good luck, enjoy and stay safe.

@ToTheGarage 4 года назад

Hi Guys. Yes very much agree that the colour change is very obvious and I dont think you will be in any doubt👍. Have fun and stay safe

@ottoalbuquerque2868 2 года назад

i've bought a similar forge from the same place, however the air valves on mine are not opening up at all, I have moved the butterfly up the thread and used all my strength to do the same with the valve, it wont budge. does anyone know why?

@mjwalters8394 3 года назад

Hiya what size crucible is that you are using in this video

@SoBeit777 Год назад

same question^

@dizzolve 2 года назад

10:06 that was kinda funny ......... but look I have a healthy respect for the system as well.

@thedon1lvp744 3 года назад

What size pots should i buy for a 10k one pal

@k1golfa1lessons20 2 года назад

Hi Just Thought I would share this with you? Hopefully it is helpful. The New interchangeable crucible Tongs heads are on pictures 10 and 11 and cater for sizes 4/6/8 kilo crucibles. And they fit. Type in on eBay ( furnace crucible Tongs for the devil forge 10kg And see what you think . The set of two tongs At £126 for two and £56.50 each for the pair They are for the devil forge 10 kg fully closed the tongs diameter is 8cm across and are for crucibles measurements of 12 cm diameter above and below Fixed sizes. For safety reasons keeps the person away from the crucible and furnace at all times during the pickup and pouring of hot metal crucible pouring. They are heavy duty : Nearly 3kg between the two. Well balanced when in motion with crucible full and not full and when not in use. both can pour from a crucible with ease the one’s in the picture are for advertising purposes only . Contact for enquiries: on sizes of crucible Tongs as they are made professionally to order. Contact for further details from eBay on orders. Hopefully this is helpful as it was for me and my 10kg devil forge. Great tongs.