DUDE! you're a freaking genius. i've been messing with this thing for 2 weeks. i was this close to taking it into the shop. i had my shark fixed within 5 minutes after watching your video...thanks.
Went looking for an assembly video for my new Shark Navigator DLX and thought "Well, learning some maintenance might be a good idea." So I watched this. This video is excellent. Shark should pay you for this and include it in the shipping box. What I especially like about it is that you have tied in the troubleshooting steps with maintenance steps so that basically the viewer sees an almost repeat of what the buttons and hoses do and how to take them apart and put them back together. Thanks for this very helpful video - it's bookmarked!
Young man, you rock. I have a different model but I was still able to follow your guide to solve my problem- clog. I can't tell you what a relief it is to a. get the mess cleaned up and b. not need to pay a service man or god forbid buy a new one. THANK YOU.
Thank you SO much. I was getting ready to go out and buy a new vacuum cleaner. My husband tried to fix our Shark Navigator and was not successful with it. He was certain the motor was no good any longer. I watched only half of your video, and you showed me what the problem was. Pushing a broom into the hose found a gigantic obstruction at the very end of the opaque portion of the hose. (I accidentally broke the ribby part of the hose, but some duct tape took care of that for the time being). Now our vacuum is working just fine, and you saved me ... well, the price of a vacuum cleaner. I really cannot thank you enough. If you take donations, I would be glad to send you some money. You deserve it.
Duct tape will not seal your hose leak, especially on the ribbed portion. Therefore as you vacuum, you will be breathing in the dust. Until you get a new hose, I advise wearing a dust mask. Me, I always wear a dust mask when vacuuming anyway, as most vacuums are not fully sealed. I also wear earmuffs to protect my hearing, similar to what landscapers wear when blowing leaves.
I picked up a shark vacuum on the side of the road. Got home and it wouldn't suction. I'm like o this is why they threw it out. I was 1:17 in this video and found so much stuff in the hose. Spent 30 minutes getting everything out and now it works like new. Eight years later and this video is still helping. Thank you.
Has this video been up for 10 years and you still haven't corrected the title spelling? Anyway, it's an excellent video and I learned something from it. Thank you for putting this up, it helped.
Good Evening, I was going to throw my vacuum away after several attempts to find out the decrepancy with the suction. You are Amazing!!!!. After trying to clean the hose with a broom. I filled a bucket with hot water let it sit and all the dirty water came out with a clog of built up residue. I have it hanging on my shower head. I will put it in the sun to insure it dries out. I had it stored in my garage 2 years and forgot. I can't thank you enough. You are an excellent teacher. I appreciate your time.
Thank you so much for posting this. I had it repaired from a shop few months ago and it broke down again today. Just few a minute watching your vid I found I fixed it. Thank you so much! U saved me money, mileage, and time! I subscribed!
I just bought this vacuum for $10 because the lady said the head was blown. I cleaned it out at the bottom but didn't think about the top hose. I got to 1:28 and now I have a new vacuum! Thank you :D I am one happy girl!
Man, thank you for taking the time to do this video. The problem that I have is the brush is spinning for 1-2 seconds and it stops and then I get the red light. It’s been cleaned throughout and the hose is clear,lots of power. Many are saying to change the belt but the belt looks like new. Thanks
THANKS!!! I was just about to go buy a new vacuum when I decided to troubleshoot this one. Within the first couple minutes I found the problem thanks to your video. You just saved me at least $100!!
Thank you for helping me learn how to troubleshoot and fix my shark navigator. I was thinking that I had to buy a new one, but thanks to your helpful video, it's working just fine now. You are an awesome teacher....thank you so much!
My daughter was given one of these and she said it didn't suck anymore. I started taking it apart and used a shop vac on blow mode to push the dust out of it just like you said. The top cyclone was packed with dust. I had to add the crevice tool to give it extra velocity and worked on it both directions for a good 5 minutes. I blew out all the foam pads and the hose and everything. Tomorrow its going to be 95 degrees and I'm going to wash the foam pads and put them out to dry in the sun. I figure it will be done in an hour. But so far, its like a new vacuum Thanks!!
Thank you very much for taking the time to create this video. I had already thought I had tried everything to find the problem with my vacuum. Cleaning the hose with the broom handle revealed a juice top that was lodged very nicely in the center of my hose. Everything working great now, thank you :)
Thank you it's so nice to see a young man taking the initiative to help others....keep the good work...and I love the way your cute dog was trying to be part of the lesson....
Thank Gd there are people like you in the world. I thought I did all the troubleshooting but then using the broomstick discovered a clump of dirt in the middle of the hose that I did not see or feel. Did the trick! Thank you!
THANK YOU!!! My shark stopped sucking after just a month, and I was really upset that I might have to deal with the hassle of returning it. BUT- it was a simple fix thanks to you! Nice work!! :)
Thank you Thank you Thank you so ver much. Our Vacuum is up and running again. We took the hose off that was connected to the base and it was jammed. God Bless and thank you for taking the time to post I am very grateful.!!!😊
Thanks so much, this really helped me clean my mother-in-laws vacuum. As a retired teacher, I respectfully request you correct the misspelling on the title though. Professionalism :-)
This was AWESOME!! I have called Shark twice and just called a few min ago and they are sending me a new pod. However, after watching your video and going through every step my vac is as good as new!! Now, I know how to take care of it! Thanks so much!
Thanks a lot. I didn't even realize that the piece at min. 3:10 could be lifted out to clean one more filter. THAT was the critical step I was missing to know how to get the suction back up.
Thank you for the very informative video! I was able to locate and clear an obstruction on my vacuum that I had previously overlooked and now it is fully functional again. Thanks again!
I am getting such a great education on my Shark from this amazing young man. He has a great presence, clear concise instructions and the best utube on the Shark vacuum fix-its. A very awesome job.
Hopefully you don't get corrupted by the world, I'd like to see you prosper, for yourself and for your family. I love what you do, thanks for the help.
Thank you...i just ordered a new one from walmart then i decided to check youtube...because of you, i found the clog in the hose using a broom handle and discovered filters i didn't know existed. the the suction is so hard now that i can feel the resistance when i push it across the carpet. needless to say, i will cancel my order...all because of you!
thank you! 2 minutes into your video I was able to figure out the hose was obstructed in several places. So gross! vacuum works great now. So glad i watched this before i tried to return or buy another vacuum.
Thank you. My 3 month old Shark Navigator rollor brush was not working--no green OR red light. Pushing the black button and removing and reinstalling the head restored the power. You are bookmarked!
Hi LogDog, Just wanted to say thanks I was having an issue with my shark (same as in the video) and turns out it was in the hose (needed to be stretched) and after following the troubleshooting tips I saw the huge ball of fur (cat) that was stuck in the hose. I followed all your maintenance tips in the video and now it runs like new again. My sincerest thanks to you for taking the time to make this video. It really helped me out. Thanks and keep up the great videos! :D
Wow. This video changed my life. Okay... maybe that's an exaggeration but this video provided me with the solution to my problem by the 2:30 mark - a massively clogged hose. Vacuum now works great. Thank you.
Thank you so much! I was ready to go buy a new vacuum today because the beater bar wouldn't work and no light. We'd tried everything except disconnecting the handle from the bottom. That did it - thanks!!!! Oh, and I never knew the filter basket came out.
yep - also a ridiculously clogged hose! broom handle did the trick. had already located a vac shop with plans to drop it off when they open tomorrow. thanks for saving me some cash!
Great video - thanks for making it. I was able to figure out what that awful red light in "carpet mode" was about and fix it in 3 minutes (restoring it back to a green light) thanks to the video.
Awesome Video! I went through step by step and now my Vacuum cleaner is operating like Brand New! I am not very adept at Maintenance,but this was easy to follow.Thanks once again!
This is such a helpful, straightforward video- you are great! I'll definitely be visiting your channel in the future when I need help with my Shark Navigator.
Thank you logdog321. My Shark vacuum was losing suction. I followed your video and it is like a brand new vacuum. I forgot just how great it worked! It's even better than a shopvac or one of those vacuums at the carwash, and with three kids, I need it to have major suction. Thank you so much for your help!
Thank you sooooo much!! Like the comment below, I was going to go buy another one. Thank you so much for your time and effort to put this together!! if you were in person I would give you a big HUG!!
Hi! I was wondering if you could take out the roller, to make it easier to get the hair and stuff that is wrapped around it, like you can on other vacuums. This is what I was searching for. Great video and you did an awesome job of explaining everything clearly!
Thanks so much. Sometimes it just takes someone to sit down and bounce ideas off of to fix something. This video did that by organizing my thoughts and giving me a protocol to follow. Thanks a million.
Wow! That was a genuinely informative video, thanks! I am experiencing a sudden high-pitched whistling sound when vacuuming with this model so I will try your maintenance steps this weekend and see if that solves the mystery.
Your really great at explaining, I was thinking...."Oh crap" Do I have to buy another vacuum? Vacuum is as good as new thanks to you!!!You really know your stuff!
wow, i know this is an old video but thank God it came up in my search. i'd checked my hose twice and didn't see anything, but when i pushed a broom handle through - there was the clog (a piece of wood from construction, actually). THANK YOU!
Thank you, Genius!! My very newish vacuum is ontop! Thank you. It was plugged in one area, and I'm SO GLAD it was n o t the motor. I was so bummed. I'm a widow with NO extra $$. Thank you to you & Sharp Vacuums!!
Great video man! I learned a few things. You forgot one part though, cleaning out the metal screen attached to the fine cyclonic dirt filter. It can get pretty caked up with dirty after awhile and I usually just take a wet paper towel to it and then let it dry.
Nice dog! I have a newer Navigator and had lost suction- had sucked up the outlet safety cover for the outlet end of an extension cord. Had to loosen the 3 screws at the floor plate and pop it off, my problem was obvious. Great video and thanks for the tips!
Wow! I'm impressed! Thanks for this video....my shark navigator runs great now....i never knew about that little pancake looking filter under the big donut filter....you're the man!
Really good info. I do have a new 350 and did not realize no usual accessories included. Plus on second position have no roller action. Will check your method of checking this! Thanks!
Great video, thanks so much. The beater brush wasn't turning, and no green light. I took the floor head off and put it back on, and magic. Good as new! I don't know what it does, must reset something?
