Sharp Blades and Smooth Cuts! The EASIEST Way To Sharpen Your Chainsaw Chain Perfectly, Every Time!

Подписаться 431 тыс.

Просмотров 744 тыс.

50% 1

Tired of hand filing your chainsaw chain to end up cutting crooked or not at all? Stop paying repair shops for something you can easily do for free! Today we take the guesswork out of chainsaw filing, using tools you already have! Achieve the perfect pitch and cuts using Dremels chainsaw sharpening attachment. You'll never cut crooked again!
Get your own Dremel HERE!
amzn.to/48Es5E9
Get your own Dremel Chainsaw sharpening kit HERE!
amzn.to/3U0uu7N
Thanks for tuning back into Chickanic! If you found this video helpful, please LIKE, SUBSCRIBE and COMMENT!!
If you would like to show your support, find my Amazon Wish List HERE!
www.amazon.com/hz/wishlist/ls...
Buy your own Chickanic T-Shirt or Hoodie HERE!
chickanic.com/
Find some of my favorite tools in the list below!
Get a WERA tool kit like mine HERE!
amzn.to/3CEkWo5
Get your WERA 8mm nut driver HERE!
amzn.to/3I4tx4B
Find your own 2 Cycle adjusting tool kit HERE!!
amzn.to/3IMn4vB
Get a compression tester like mine HERE!
amzn.to/3KM7Ibg
Get a spark tester like mine HERE!
amzn.to/3vIHUbM
Get your own digital tachometer like mine HERE!
amzn.to/3X2emS7
Find your own digital multimeter HERE!
amzn.to/38aX2FJ
Get some 12" hemostats HERE! I LOVE THEM!!
amzn.to/3tMvlvd
Get my FAVORITE pliers HERE!
amzn.to/36P5ud3
Get an Owl Torx drill bit set HERE!
amzn.to/3urvRze
Want a Endoscope like mine? Find it HERE!
amzn.to/3Ni71Ir
Get your own X-Ray Vision TOPDON TC004 Thermal Image Camera HERE!!
amzn.to/3TjJa1o
Looking for the BEST 2 Cycle Oil? Find it here!
amzn.to/3E4kCkT
My name is Bre. I took two years of small engine repair at the local college. When I left school, I fell into a wonderful job at a local small engine shop where I worked the counter for a couple years. In 2010 my husband and I opened up our own small engine shop in central Arkansas where I am able to work alongside my family and best friends. We see over 2,000 pieces of small engine equipment every year, and answer 1,000's of small engine questions. We specialize in brands such as Briggs and Stratton, Kohler, Echo and Shindaiwa, but work everyday on MANY other brands like Stihl, Husqvarna, Honda, Craftsman, Remington, Red Max, Troy Bilt, Scag, Bad Boy, Hustler, World Lawn, Poulan, Mantis, Etc.. Hopefully, my experience I share, will save you Time, Money and Frustration in the future!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes. Please use all possible safety precautions when repairing and operating your small engine equipment.

Хобби

Опубликовано:

17 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 943

@Chickanic Месяц назад

Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B

@ChrisMorton75 14 дней назад

can you list your pick of the best hand held chainsaws?

@richardbeals1403 4 месяца назад

My dad used to have his chains commercially sharpened at the local farm supply place and they would grind the crap out of them. He was lucky to get 4 maybe 5 sharpenings because they cut so deep. Back in the mid 70's he bought a Foley Belsaw little sharpener and I was tasked with learning to sharpen chains. I quickly discovered the teeth just barely needed to be touched to put the edge back on them and they cut like new again. Chain life jumped dramatically and pretty soon I was sharpening all my dads friends chains as well.

@DS75921 4 месяца назад

You took the words right out of my mouth I have chains that are 20+ years old using a grinder the same way

@kennyremouremovich8788 4 месяца назад

That's funny

@ernestestrada2461 4 месяца назад

Thanks. I bought on sale electric tree limb trimming saw to cut limbs of a neighbor's tree that hang into my yard over the common fence. This will help me to understand what I need to do if I need to sharpen the chain. I have already purchased oil for it, haven't used it yet.

@feez357 4 месяца назад

@@DS75921 20 years doesn't mean anything. Do you sharpen once per month or once per decade?

@tin2001 4 месяца назад

@@feez357 Well that doesn't mean anything either... Do you use your chainsaw once per day or once per season? Do you cut balsa wood or something that seems like steel?

@PaulNoll-gg2qk 19 дней назад

What a blessing for the man who has a beautiful long-haired capable Chickanic.

@dcc2444 3 месяца назад

Learned more about chain sharpening from you in 12 minutes than in over 35 years from the so-called pros!

@rocketmann8333 2 месяца назад

:). I hate to admit it but I did too! 👋👋👋👍

@workingguy6666 3 месяца назад

Lady, you are an angel for teaching the masses without pushing your services.

@2Truth4Liberty 21 день назад

I think that's a key factor in getting 400K subs and growing :-0)

@bennydafarmer865 7 дней назад

I’ve found her videos the most educational out of all. Thanks for making it easy for all of us who wanna learn!

@joemcintyre2090 2 месяца назад

She goes gangster with the lock blade! Have to say Chickanic is one of the best how to channels!

@steveng8706 4 дня назад

How did humanity get by before Chickanic...? Before stumbling onto this channel I thought I knew it all. WRONG!!! I am so hooked on her channel! 😎

@eliazarshaw2213 4 месяца назад

This lady knows how to explain like a good teacher

@Skopper1 4 месяца назад

The best manual method by far is the Stihl 2 in 1 Filing Guide because they knock down the rakers/depth gaugers at the same time. Super easy. I have all 3 sizes.

@AdministrativeReload 4 месяца назад

This. I have a power sharpener, which is fast and easy, but my chains cut the best after I go over them by hand with the Stihl 2 in 1

@joefudd 4 месяца назад

They are made by Pferd, but Stihl puts their name on them. Pferd are the same thing and are cheaper.

@idahoron 4 месяца назад

I also have the 2 in 1 files. They can't be beat.

@sneakyfox4651 3 месяца назад

I use the 2-in-1 to touch up the chain after I have hand-filed it where I first file the gullet with a round file, then straighten the diagonal front and the top of the tooth with a flat fille and then resharpen the gullet with the round file. Or that's how I do it in on my two Stiga saws with relatively short bars. But recently I got a Husky 572 with a 28 inch bar and the X85 full chisel chain, and since the vendor didn't have the 2-in-1 for that chain, I got the combined chain- and raker guide tool from Husky in stead. Haven't tried it yet because it was too cold to stand and file it in my unheated workshop in -6 Centigrade, so in the meantime I improvised a small workbench in my boiler room and also installed working lights. So tomorrow I'll get to it so the Husky will be ready to cut again. Edit: The chain is called C85, not X85. The X belongs to the Husky 572 XPG name.

@ChrisLascari 3 месяца назад

😂😅

@timcolton4680 4 месяца назад

Best explanation on the anatomy of a chain I've ever seen.

@user-bj9ly9yf7n 4 месяца назад

I've been sharpening saws since I was a teenager. I'm 68 now. You make things so easy to understand. Even I learned some things. Thanks for the video!!

@1quickdub 4 месяца назад

The Stihl 2 in 1 is a game changer. It files the rakers alongside the tooth. 2 or 3 swipes on each tooth when you need a touch up, or after each tank of gas/bar oil - and right back to work

@boomerau 4 месяца назад

Yup got one of these and it solves all these problems

@donchristie420 4 месяца назад

I pull toward me, much like Japanese wood planes, it engages the metal better-try it

@harpintn 4 месяца назад

I have one of those as well. I don't have a wood stove, so I only use my chainsaw a few times a year. That means I don't get much practice at sharpening the blade. The 2 in one does a great job and is perfect for someone that just needs a chainsaw every now and then.

@jasonbroom7147 4 месяца назад

Yeah, I love that tool, as well. If you don't cut a lot and don't need to sharpen chains every week or every day, it's a great way to get it done.

@donchristie420 4 месяца назад

@@jasonbroom7147 ??, I touch up chain every tank of fuel (while it’s cooling down to refuel)

@lamarwilliams185 3 месяца назад

Best example of what to do on RU-vid. Thanks for the close ups. Most these videos blah blah blah.

@mattartoo 4 месяца назад

Great video! I've done this stuff FOREVER and know everything anyone would ever want to know about saw chain and sharpening. You totally understand what is going on and it's refreshing to hear how you explained this all perfectly! Always a joy to watch your videos. :)

@Chickanic 4 месяца назад

Thanks 👍

@paulmussey6424 4 месяца назад

Awesome video - first time my chainsaw started cutting crooked I thought I broke something. This explains everything very clearly. Now I need a new gadget for my Dremel 😊.

@vanhagl5591 4 месяца назад

I Learned to sharpen by my grandpa, he owned a sawmill and was a sawyer. I Later spent two years with the forest circus. A lot of good knowledge was passed down. Different angles, different sharpeners, different guides. Even worked with a guy who worked for Oregon in developing chains. Great video. I love my $700 bench grinder, my handheld rotary grinders , Timberline, but my favorite is my Stihl 2in1. Angles and depths are always consistent and it catches the rakers every time. No matter what I use I’ll slowly catch them points with a loose file to perfect them and debur the edges.

@hime273 4 месяца назад

Then why is she recommending to use a Dremel Tool attachment?...Which is crap

@larryscarry411 4 месяца назад

@@paulmussey6424My son gave me a chain sharpener from Stihl i was to proud to except it an told him thanks but i like doing it by hand and it would get ruined in my tool box for the chain saw . Im 60 now it was last year he gave it ,but I can barely do any more cutting an I just bought a new chain place i brought it to said I needed a new bar because i told them the chain was flopping left n right but my old chain was the problem so I said no just a new chain n file please 😅 Glad I saw this video because I've wondered why it would also curve when cutting now I know with out a doubt.

@cladkerson8479 3 месяца назад

This is one of the most informative videos on chainsaw chains I have seen. Thanks for posting!

@krumple8560 4 месяца назад

I struggled for years trying to sharpen my chains with limited success. A couple years ago I bought one of the Stihl chain sharpening guides and it does a great job taking almost all the guesswork out of sharpening. They are a bit pricy but well worth it IMHO. As always, YMMV.

@realamericanz4641 2 месяца назад

Ma’am that was like a sunset...beautiful!

@beerdrinker6452 3 месяца назад

One of the best sharpening videos I have watched, and I have watched many. Thank you.

@user-xp6zd2sf1l 4 месяца назад

I never find your videos dull to watch. Always seem to sharpen my skills when I view them thank you!

@superdave380 4 месяца назад

Good morning Bre, great video. This will help people a lot. I am surprised that you did not mention using a depth gauge for setting the drag height. IMO this is essential, Another great product you did not cover is the Sthil/Pferd 2 in 1.

@LukeWarmwater-yb5lx 4 месяца назад

Thanks Chickanic, very very informative, love the way you explain things.

@hiroshioki17 4 месяца назад

I watched many RU-vid videos about sharpening chainsaw chain. This is the best one. Thanks.

@W1ldt1m 2 месяца назад

Love it! Spent way too much of my life cheaping out and trying to hand sharpen my chain. I always cut curves. Last year I finally popped for the dremmel kit and it fixed all my cutting issues.

@michaelalbert8474 4 месяца назад

Great video. I worked on a farm when I was a kid and the old timers (they may have actually been younger than I am now but they looked to be somewhere close to 150 at the time) would give the chain a lick or two with the file during every break. We did a lot of Locust fence post that were very hard on an edge. Keeping the chain sharp prevents bigger problems that require more aggressive sharpening.

@kevinzahnle8274 4 месяца назад

Everytime I watch your show I learn something,thanks !

@nohemitoobad 4 месяца назад

I am always impressed by your information. I learn something new every time I watch your videos.

@Mainly-boy-outdoors 2 месяца назад

Thank you for posting this. This is the most educational video on this subject.

@je1279 4 месяца назад

I'm a rookie to chainsaw sharpening, but I've found the Stihl 2 in 1 to be a very useful tool.

@larryscarry411 4 месяца назад

Thanks Bren I haven't been on here for a couple m9nths ,but I do learn something that this 60 year old didn't know ! Have a blessed day to you n yours!

@beasst55 3 месяца назад

Never gave a second thought about the leading tip! Thanks, saves me a LOT of re-do, re-do, re-do instill it just works out!

@vangoodwin7335 4 месяца назад

Thank You very much Lovely Lady! Doing most of my sharpening in the field while falling trees or cutting lengths for firewood I've noticed a lot of "crooked" cuts happen because of how people hold their chainsaw. While keeping my son and his friends from getting their hand away from the kick back bar, I had to let them practice and get the muscle memory of holding the saw straight. I build ergonomic furniture and desk sets so measuring folks for comfort sometimes means correcting bad habits. Posture is important in so many aspects of daily life and cutting firewood or falling trees is no exception. Good Luck! Those comments go for sharpening also!! With Respect, You all are in my prayers Hoka Hey

@spankyhadley515 3 месяца назад

A very nice explanation and demonstration of proper sharpening. One thing left out was a bar worn uneven causing curved cutting. Easy fix if you have a stationary belt sander. Be sure to set it to 90 degrees then lightly sand until even on both rails.

@markmcmeen287 4 месяца назад

I thought I knew all I needed to know! Thank you for touching all the bases. Very helpful !

@regsparkes6507 4 месяца назад

Perfect to see this Dremel system, I just bought one, and now I'm looking to see how to use it correctly. Thanks for this Chickanic.

@upsidedowndog1256 4 месяца назад

Great tips! I do my drags about every 3rd teeth sharpening. My saw takes off ribbons after that!

@christopherraso1990 4 месяца назад

Learned valuable information once again and that has to do with how to read the bar correctly and what the actual difference is between the similar chains. Your video is the only one I've seen that actually shows and explains not only up close and personal of chain sharpening but how to read the bar info. Your head and shoulders above everyone else who does these kinds of videos. That's why I love watching you and info and teaching you deliver. 👏👏👏👏👍👊✌️🙃🇨🇦

@jerrygeorgopolis8015 3 месяца назад

Fantastic ! I have been leery at trying my own sharpening, until now !! Thank you and all the best.

@johnnycashbenham1192 4 месяца назад

This is a timely video as i just bought me a husqvarna pole saw, I've definitely been learning quite a bit about chain sharpening

@LTVoyager 4 месяца назад

After working several years as a logger when I was young, I still sharpen my saws my hand with a file. I can get the angles pretty good just by eye and I can sharpen a chain in 10 minutes or so generally and can sharpen in a vise on my bench or on a stump in the woods. No need for power tools. Simple and easy.

@gunterbecker8528 4 месяца назад

FULLY AGREE WITH YOU HANDFILLING IS THE WAY TO GO ! ALL ELECTRIC SHARPENING HEATS THE CHAINS TO MUCH ÀND SOFTENS THE METAL !

@papascruffy 4 месяца назад

Interesting Dremel sharpener, I started out taking my chains in to be sharpened but noticed they didn't last long, followed a fell that showed how to sharpen correctly with a file, I tried it and wow, throwing shaving like wild and lasted much longer. It takes a little time but not bad but this Dremel sharpener looks worth a try! Thank you!

@danellsworth7102 3 месяца назад

Thank you for teaching me about chainsaw blades!!!

@tannaclark4195 Месяц назад

Thank you love the way you broke it down and explained how the chain actually cut I had never been told that breakdown and it helps tremendously to know what does what and you explained it so well thank you

@LouisGodena 2 месяца назад

I'm surprised to see you here. I thought you had gone out of business. Good to see you.

@joesixpack8305 4 месяца назад

I'm a 50-year weekend warrior chainsawer. Used every sharpening gadget known to man, in this video, or mentioned in this video or any other video. I mothballed all of them. I hand file every time because it's just as fast as any gadget and it does a better job. All the issues Bri showed in this vid were spot on. But one major one was not mentioned and I learned this from You Tuber Buckin' Billy Ray. GET THE GULLET OUT! It takes you from a "good" sharpening job to a "great" sharpening job. Trust me!

@Geopolitic157 4 месяца назад

Yes, you got it without question, Buckin' Billy Ray's video on the "Gullet out" was experience talking to the max... That said, we give it up to Bri here, who did an outstanding job on explaining the details behind the chainsaw chain cutting parts, and how they work together in sync.....All good.

@hime273 4 месяца назад

@@Geopolitic157and then she says to use a Dremel attachment, which is crap.🙄

@joesixpack8305 4 месяца назад

The dremel sharpens the tooth. Used that too. The attachment is for beginners. But again, the dremel cannot beat hand filing and getting the gullet out.

@montelott8570 3 месяца назад

Thumbs up on the gullet man buckin' billie ray.

@hanginlaundry360 3 месяца назад

Can you please explain what getting the gullet means ? Thanks!

@jlcdrivewayramps7343 3 дня назад

the best, the very very very best chainsaw sharpening video. simply the very best.

@hickorystx 4 месяца назад

VERY WELL EXPLAINED!!! Great job Bre!!! Thank you!!😀

@petergoertzen8692 2 месяца назад

Great job. I learned something new. Thanks for sharing.

@whodoneit218 4 месяца назад

I've seen a lot of chain sharpening videos, but this is the first one that has at least inferred that you need to lift up when sharpening. It makes since, since the underside of the actual blade is where all the business happens.

@bradlane3662 4 месяца назад

I absolutely agree with you. I still can't sharpen a chain. But I'm the guy who chew's his links up with the file because I've always pushed down.

@frankdrahos8569 4 месяца назад

@@bradlane3662 Check out the Timberline outfit

@garycorrick 4 месяца назад

Excellent chain sharpening video. Very helpful!

@davidkasperek3907 Месяц назад

That was a genuine public service! Thank you so much for the explanation. 👍👍👍😊

@kieronhaney5029 2 месяца назад

Been using the Dremel sharpening system for many years. Being an old fool I'm living proof that it's the easiest, simplest, cheap and effective way I've ever come across to keep a chain sharp. Thanks for the confirmation!

@davidhawthorne7423 3 месяца назад

Good video, very informative. I do like my Harbor Freight chain sharpener. Good enough for the occasional user. I bolted mine to a 2X4, then clamp it to the bench when I need to use it.

@patp4199 12 дней назад

Only recently discovered Chicanic. A brilliant 'How to' resource. You have a great delivery. Interesting and entertaining to watch - my type of person 👍

@pick4u2 4 месяца назад

Thank you, your videos get better every time

@skgmd571 28 дней назад

Thanks chickanic ! I've used a chainsaw for years and always paid to have my blades sharpened. Not anymore thanks to you. I love your videos and have learned a lot. You are the BEST.

@quantumstone992 3 месяца назад

Oh my God. You are very good in what you doing. God bless you. Beautiful and hard work woman. 💜 Roger here 🇨🇦. From Brazil live in Canada.

@ddawson8069 18 дней назад

Why blaspheme dude?

@mikefurness1598 4 месяца назад

One other reason for a curved cut could be that the bar is worn unevenly on either side of the groove. A way to prevent this is to flip the bar about every other time you do a full chain sharpening. Generally not needed when doing a quick chain cutter dressing in the field. Always a good thing to check the rakers before starting a good days work in the firewood pile. And keep those logs clean. Just a little bit of sand, dirt or stone will almost immediately kill the best sharpened saw chain. Hope this helps!

@vanhagl5591 4 месяца назад

The groove in the bar can open up, there is a tool that will roll pinch it back to specs.

@harpintn 4 месяца назад

That is an excellent point. Also the bars do wear out, and sometimes have to be replaced.

@Tman317 4 месяца назад

Great point, and I was surprised she didn't mention it. I always flipped my bar back and forth often to keep it wearing evenly.

@MrGlenferd 4 месяца назад

IV had to true up a lot of bars in my years as a Stihl tech.

@harpintn 4 месяца назад

@@MrGlenferd Isn't it cheaper to just replace the bar?

@randyeling5662 4 месяца назад

Benn doing it with the Dremel for a decade. Thanks for getting it out there.

@enricami2494 3 месяца назад

Thanks again Bre, you're simply good people

@jimbrewer2893 4 месяца назад

I learned how to sharpen a chain from a man I worked for back in the 80s. Always by hand. Takes time, but it works for me. I've done square filing, much harder to learn and square ground chain is rarely used except by loggers and arborists. You hit on a good point about making sure the depth gauge is correctly filed as well. Filing the gullets is important as well. I say, file the way you feel comfortable with. Really good video Bre. Oh, I may have to try the Dremel method.

@donnymitts7277 2 месяца назад

I have been using used 40 w oil from my tractor .. never had a problem. Am I just lucky. My Husky is 25 yrs old , runs and starts easy

@Matt_justlikethat 4 месяца назад

I use the Stihl 2 in 1, soo nice, sharpens all areas an knocks down the raker…😁😁

@skysurfer9655 4 месяца назад

Same here. I bought the Pferd sharpener which is the same as the Stihl and it paid for itself the first year.

@conspiratornot2215 4 месяца назад

MY Dear Lady.....Thank you. Once again, your video came at the opportune time for me. Each video is honest and helpful, and you add a certain charm to each. I enjoy the content, and I admire your finesse. I also appreciate what you do for us all.

@johannbraunstein1190 18 дней назад

Chickanic for President . She has helped me a tonne with all sorts of issues .

@WillysPerformanceCycleCtr 2 месяца назад

Nice illustrations. Thanks.

@sherriberkley188 3 месяца назад

Love your TIPS

@AdmiralDG 2 месяца назад

So vindicating having a pro come out with a video on the method I already use! The dremel bits work a treat, and get it done quick. I can sharpen mid work load and Im only down a few minutes :)

@loisrobinson4794 Месяц назад

Thank you so much for creating this video!! ITS EXCELLENT! I've been watching RU-vid videos again and again in order to learn how to properly sharpen my chains. You're the first person to really show the specific parts of the chain, how to sharpen it correctly and the science of how a chainsaw cuts through the wood. I mean, Wow! Very very helpful! Thanks again and have an awesome weekend!

@mikejerrett7354 4 месяца назад

My uncle gave me an old pioneer chainsaw that would cut on an angle, I thought the bar was bent now I bet it was the chain like you said. Interesting video 😊

@glenspryszak6005 4 месяца назад

Check the rails of the bar to see if they are spread apart or if one rail is lower than the other from wear. That can make a cut lopsided. That can be fixed.

@jbbolts 4 месяца назад

@@glenspryszak6005 correct... 99.9 % of the time its the bar not the chain

@acquasanta6676 4 месяца назад

I bought a used saw and it cut curves , had the same size chains for another saw they cut straight . Turns out the fella was filing the heck out of the right side and barely touched the left side of the chains , teeth half gone compared to almost like new on other side . Some people are not mechanically inclined .

@n2omike 4 месяца назад

The Stihl 2 in 1 chain sharpener allows even an inexperienced guy like me to get a killer sharp chain!!! Look it up! Best chainsaw money I ever spent! Makes the right angles and even trims down the guides.

@PatsPurposefulPutzing 4 месяца назад

I have been using the dremel attachment for several year but still managed to end up with a curve-cutting chain. Your tip about the tips is very helpful. Also The curve-cutting chain was very old and the bar was the one that came with the saw 20 years ago. New bar, new chain, ready to sharpen when needed using your tips. Thanks so much.

@johnduffy6546 3 месяца назад

You are AMAZING! A wealth of very good knowledge that you so generously share. Thank you! I've been cutting wood for almost half a century and I've seen a LOT of smoke & mirrors when it comes to sharpening. You've got the right info straight and unbiased. rest assured, I will put this to good use;

@TheBeatenPaths 4 месяца назад

BUckn' Billy Ray has the best chainsaw sharpening tutorials.

@leonardryan8723 4 месяца назад

Buckin is a Canadian logger in his life . 😊

@TheBeatenPaths 4 месяца назад

@@leonardryan8723 I don't know what that means, but I'll agree with you lol.

@58dorsett 4 месяца назад

That only works if you are Canadian.

@TheBeatenPaths 4 месяца назад

@@58dorsett I am Canadian and still don't know. Never heard the term "in his life" before.

@raincoast9010 Месяц назад

@@TheBeatenPaths He probably has a universality edumacation.

@aeroforce100 4 месяца назад

Glad to see that you survived the snowstorms. Excellent presentation as usual.

@eliazarshaw2213 4 месяца назад

Great for real. She does research and organized her sequence so it flows and keeps the audience 🪝ed

@AodhMacRaynall-dr1sf 4 месяца назад

Man, best info I've ever heard on chain-saw sharpening!

@richnorman5017 4 месяца назад

GREAT video Bre!!!! Need this on a loop on the front counter for the shop!!!! Very good explanation and examples!!!!!

@joyceterra2265 4 месяца назад

❤Thank you so much. My husband recently past and he always took care of the maintenance and sharpening the blades. I never learned how but he was a champ at it. Now I have 4 chainsaws to sharpen and had not a clue how. I do know how to use them though. So this is a great bit of info. I will get me the dremel sharpener. We do have all the other types too but I think the dremel accessory will work better for me. I am excited to get it and get them sharpened before spring.

@justlearning6371 4 месяца назад

Look in to the stihl 2 in 1 chain sharpener it’s the easiest and the best does the blade and the racker all in one literally 4 passes on each blade

@joyceterra2265 4 месяца назад

@@justlearning6371 Thank you. I will do that.

@hickorystx 4 месяца назад

Wow!! Very impressive story and individual!!!! BEST OF SUCCESS!!!😀

@barmanvarn 4 месяца назад

I was gifted a chainsaw about 8 years ago as a house warming gift when I moved onto a property with alot of trees. I knew how to be safe but really didn't pay much attention to the blades. I rarely used the saw (maybe once a year for a single day) so I was lazy and just bought a new blade each year. After a few years of that I decided to do it the right way and just bought a Stihl handheld sharpener.....man, it was night and day difference on my blade. Happy with the purchase and super easy to use.

@juhajuntunen7866 4 месяца назад

Its good idea to give chain light dharpening (ond or two push by file,) every time you fill tanks. It takes couple minutes but made work faster and funnier.

@chuckhowland5146 2 месяца назад

Excellent method. I have just been buying new chains but have saved old ones for an easier way to sharpen. I am ordering one! Thanks.

@hooterfivesix 4 месяца назад

All superb "tips"! Thanks for explaining it in terms I can understand, as you usually do.

@jimmyknowles436 4 месяца назад

I bought the harbor freight bench mount sharpener mounted it on 1/2 inch plastic sheet with a two bar of same material screwed to bottom for putting in vice works great .

@D-B-Cooper 4 месяца назад

I have used one for years, gone through a couple of blades. Besides firewood I mill logs freehand. I have found that a ripping chain cuts fastest and smoothest if sharpened at 0deg with no rackers on 36” bar.

@Sean-he2ng 4 месяца назад

Nice video. Don't forget to check the bar rails for uneven wear or the "ditch."

@henryparrott2447 4 месяца назад

Great show young lady 👏 may God richly bless you. Very helpful

@Tman317 4 месяца назад

I've been using the Dremel attachment for nearly 20 years. Glad to hear from ypu it's worthwhile. It's never let me down, and I've done a lot of cutting over the years!

@eddiemertin3381 4 месяца назад

I'm addicted to using the files. It's extremely satisfying to pay attention to the angle and see that burr form on the top plate edge when the point on the tip gets restored. Then it's truly sharp. Yeah, get the gullet a little too much, but I'm getting better.

@JG-kv4oi 4 месяца назад

I agree. After years of using different type filing guides I now use just a file. Clamp the saw bar in a vise, a few strokes pulling up on the last stroke. Cuts wood like crazy. A touch up stroke or two every time I use the saw, never has a chance to get dull

@glennllewellyn7369 3 месяца назад

Amen bro. We need beers. Australia

@OriginalTailhunter 4 месяца назад

As long as you use a raker gauge (depth gauge) the size of the teeth do not matter if a the rakers are the same depth. 😉

@mrcryptozoic817 Месяц назад

The Dremel attachment is the best thing I ever bought for my chain saw. Cheap, not complicated and quick.

@bradh74 3 месяца назад

Your husband's a lucky guy! Not only can you fix most everything and share interests but those stone washed cut off jean shorts in the beginning made me miss what you had your foot on three times! lol Wow! You have done a great job with content as well!

@timnason2294 4 месяца назад

Stihl sharpeners sharpen and lower gauges an the same time. Easy to use one you get use to them.

@kbittorf335 3 месяца назад

As the depth gauges get lower do not forget the radius the leading edge to make it look like a factory new one. When there is too much flat area on them they don‘t perform as well either.

@Chillituber 4 месяца назад

Drag. That's called a raker.

@dannyblends5017 3 месяца назад

Oh my goodness, it’s a pre spring time and have a lot of tree to tend this spring and my saw chain gave up😂, knowing how much they are new in a stores I turned to our teach it all beloved You tube and after watching a few videos I’m so SO glad I stumbled upon you, the best explanation , step by step, now I feel so confident and can’t wait to show off with my knowledge 😂, thank you so much, you are the best❤wishing you a blessed day!

@johnnyshell2839 4 месяца назад

I am so glad im a landscaper with tree work in my history. Im old school. Files for life. I have to feel what's being touched by my file. But the Dremel thing is a good idea for regular folks

@beingthere597 4 месяца назад

To get the drags (rakers) right, a depth gauge is needed. The flat ones that lay on top of the bar are OK, but for a chain in the last half of life or a chain with uneven top plates, an indexed depth gauge is needed for best results. These will give you a correct raker height for an individual cutter. Stihl makes these for each chain pitch, but last time I checked , they were not sold in the US, go figure. Also, if the drivers are the correct thickness but the chain does not cut straight, check the bar groove width and profile - the bar might be too worn. An old logger trick was to put Husky chains (.058 ga) on worn Stihl bars (.050 ga) to take up the slack.

@kenbrown2808 4 месяца назад

I know Stihl makes a "one and done" sharpening tool that uses 2 files and 2 guide rods to touch up both cutters and rakers at the same time. I just use a file guide, and if the chips start getting smaller than I like, I give the rakers a stroke with a file.

@heathboeddeker5401 4 месяца назад

Actually the index depth gauge from still is sold inside the U.S. , But you have to ask your dealer to order it in for you.

@Mackeson3 4 месяца назад

@@kenbrown2808 Stihl 2-in-1. A very good tool actually, that's what l use

@hime273 4 месяца назад

@@kenbrown2808yeah, but it still requires you to manually match the angles on each side of chain.

@kenbrown2808 4 месяца назад

@@hime273 yes, but with practice, it becomes pretty easy.

@inkedandjacked1930 4 месяца назад

Ha , my new ringtone is her saying "pretty nice tip, pretty nice tip, pretty nice tip ".😅

@jeffcarpenter6306 4 месяца назад

Thank you! I have a lot of those dremel bits from my dad, but never used them. I will have to try it now.

@googleuser868 20 дней назад

Got a 12 volt Dremel style tool specially made for sharpening in the field. Works great.

@ChrisTaylor-xv2tc 4 месяца назад

Stihl 2-in1 Easyfile best thing ever. Got a bench grinder that is good but it eats chains - the Stihl 2-in-1 sharpens like no other plus files the rakers at the same time (hence 2-in-1) - don't use anything else now - even sold the Bench Grinder! Dremel attachment may be OK but files will cost a fortune & what if you haven't a Dremel?

@RobReapz 4 месяца назад

Looking at the tooth shape 11:08 after using the dremel, i wouldn't recommend anyone use it who is serious about cutting performance, looks like you destroyed the top plate under angle (now a ski jump not a nice hooked shallow chisel) 😂. People should really be using a raker gauge for the 'drags' as well, wierd you didn't advise that.

@arnobertogna4718 Месяц назад

I wish the Chickanic lived in Brisbane as I’d love to be her apprentice & do it for free - I’m 65 years old & run a Lawn & Garden Care Business - in Brisbane & love her work & videos - I’ve just subscribed - thank you for making my life easier 👍🙏