Sheet Vinyl Installation made easy

Подписаться 43 тыс.

Просмотров 16 тыс.

50% 1

Learn how to install sheet vinyl like a pro with these simple steps! We'll cover floor prep, how to cut vinyl, and even how to cut vinyl around door jambs. Whether you're a beginner or an experienced DIY-er, this video will have you ready to tackle your next flooring project!
This description contains affiliate links, which means if you click on one of the product links, i'll receive a small commission. Thank you for your support!
Shop my store right here!....www.fbsb.store/
For ALL your flooring tools and supplies......tools4flooring.pxf.io/LXqLWO
Operate your business like a pro with JOBBER go.getjobber.com/floorsbysout...
0:15: ⚒️ Flooring renovation project with new vinyl installation and repaired quarter round.
4:14: 🔧 Efficient sheet vinyl installation process with attention to detail and precision.
11:37: ⚙️ Efficient tips for installing sheet vinyl flooring with a new knife, certification considerations, and strategic seam placement.
15:33: 🛠️ Tips for installing sheet vinyl flooring efficiently and securely.
22:31: 🔧 Efficient completion of vinyl flooring installation with attention to detail and improvement of existing material.

Хобби

Опубликовано:

23 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@thereal_fatshady6920 4 месяца назад

Ive been doing flooring for almost 20 yrs and i still learn some little things from you on this channel.... not so much the overall basics but i like to learn other installers ways. Ive met these installers that grunt and growl ive been doin this 30 yrs i know what im doing i dont need new ways... i dont get it , why would you not want to learn different ways and combine knowledge and be as good as you can! Thanks for sharing!

@FloorsbySouthernboys 4 месяца назад

Man you hit the nail on the head right there. I don’t get it either

@jsballeck 4 месяца назад

I've been doing it almost 40. I now use my heat gun to remove seam tape because of this channel lol.

@FloorsbySouthernboys 4 месяца назад

@@jsballeck that’s great Stuff

@docdoctme 2 месяца назад

Workmanship at its finest! You did an amazing job. Thanks for sharing your talent.

@FloorsbySouthernboys 2 месяца назад

Thank you very much

@terenceharley7081 4 месяца назад

Job turned out good and really glad to see you started using a utility knife instead of that dangerous flimsy carpet knife

@FloorsbySouthernboys 4 месяца назад

😂😂

@robertgoss7355 4 месяца назад

Time to get your helper cutting in. He want get the knife skills unless you turn him loose. Fiberglass vinyl is so easy to learn on . when I got into it we were laying 6 ft inlaid .

@FloorsbySouthernboys 4 месяца назад

His time is coming soon

@jb-es5zj 4 месяца назад

my old boss never let me cut vinyl so i learnt by watching i still remember my first vinyl job i was so nervous n probably could have done better been doing it now for 30 years in a local capacity / small town so im not going to bad

@jb-es5zj 4 месяца назад

whos gunnna take the video then

@mackadeww Месяц назад

Certified smooth operation.... 👍🏽

@FloorsbySouthernboys Месяц назад

😀thanks buddy

@carpet180 4 месяца назад

I like the tape trick. I will be doing that now . Thanks.

@FloorsbySouthernboys 4 месяца назад

Awesome glad to be of help

@HBSuccess 4 месяца назад

Brings back memories I’m in my 60s now but all through my 20s and 30s I installed sheet vinyl for a local carpet store. We got pretty good but NOT as good or as fast as you are. I could not keep out of the glue so we had to spend a LOT of time cleaning up. Those narrow galley kitchens are the absolute WORST. I would have pulled the two loner cabinets just so I didn’t have to work around them.4-5 screws is no big deal. Back then it was 90% felt back and a lot of really cheap easily damaged stuff bc that’s what people could afford. No flash time on the glue- the felt backing had to hit it while still wet. I’ve never worked with fiberglass backed goods. We almost never cut in dry… we’d get the roll positioned, make a few relief cuts roll back and glue. We cut felt back in last.

@FloorsbySouthernboys 4 месяца назад

Gotcha

@jb-es5zj 4 месяца назад

old school i like it

@johnsteier3535 4 месяца назад

Let’s go!!!

@FloorsbySouthernboys 4 месяца назад

Oh heck yeah

@st1gzee Месяц назад

Here in the uk we use giant super hooks for cutting in the main body for our vinyls and works amazingly on angled cuts 100% no skirting damage and leaves the edge cut at a perfect 45 angle towards the walls also concaved blades are used for accuracy in those difficult to reach areas around doorways . . If you check out vinyl cutting tools you may have noticed that it’s a hook blade set into a 45 % angled tool.. have a go and see the ease and performance those giant super hooks can achieve..all the best

@hog8567 2 месяца назад

Workmanship like yours is very limited and going obsolete these days. I as one who takes pride in my own work and detail, it's nice to see that craft and work still exists.

@FloorsbySouthernboys 2 месяца назад

Man, I hear you on that. Peoples work today is anything but good.

@Outthekennel_frenchies 4 месяца назад

Wanted to see that doorway seam with that knife i seen your previous video were you use the carpet blade

@sidknee4975 3 месяца назад

That’s my favourite trowel handle. It’s nice and low and has a square type grip handle which gives great grip and leverage. Your forearm fatigues less because you’re not fighting the trowel, in my opinion at least.

@FloorsbySouthernboys 3 месяца назад

I feel the same way

@jonathancowdin3775 4 месяца назад

Nice job, i like ardex patch for glue downs, the bond strength is so much better but yeah, looks good dude

@FloorsbySouthernboys 4 месяца назад

😀👍

@user-fr2jl6ci3b 4 месяца назад

I wanted to see the seaming. Oh, well, I still enjoy watching your videos.

@FloorsbySouthernboys 4 месяца назад

I’m sorry it was a long day and honestly there toward the end of it. I was just focusing on getting done. My bad.

@user-fr2jl6ci3b 4 месяца назад

@FloorsbySouthernboys Yea I don't blame ya

@musiclyricsbyalbum5736 Месяц назад

What do you recommend around brick?

@elmofresquez1935 Месяц назад

Why not remove the baseboards and then reinstall, eliminating the quarter round?

@amysimon550 2 месяца назад

Where did you get the flooring?

@robertgoss7355 4 месяца назад

Try the Crain 727 delphin knife. I have 2 dolphin knives and the Crain is way better than the UK version.

@FloorsbySouthernboys 4 месяца назад

Gotcha

@pureskatesboii 4 месяца назад

Id like to see you teach your audience how to self level. I really need to see it done by you!

@FloorsbySouthernboys 4 месяца назад

I do not have a whole lot of experience, self leveling, I have literally only poured two jobs. Both of them were sizable, but nonetheless, I have only done it twice.

@jerridhawkins8133 4 месяца назад

Much better don’t look like a rental now 💥

@FloorsbySouthernboys 4 месяца назад

😀👍thanks Jerrid

@jacobbuckley8232 3 месяца назад

I never use the recommended trowel because they always leave to much glue and have never had any problems

@stevemuoio1968 4 месяца назад

Plus you roll with roller I think no no with pressure sensitive things have changed- just push with a carpet board all is recommended. Old vinyl was rolled recommend. Also a 3/8 Knapp roller is best in my opinion . I do use trowel then roll makes waiting time in half also smoother lay . I used to be certified in many resilient floors and again 1000$ worth of prep you used when underlayment should have been used. I myself couldn’t stand on warranty with nails l seen in old subfloor! I’m sure when you take the new classes you’ll find changes I’ve described. . But you do very good work. Carpet mills will never bend on certification though. I’ve seen them not care all about money and selling.

@FloorsbySouthernboys 4 месяца назад

I’m not sure where you are located at, but I will respectfully say that you are wrong on everything you just said

@stevemuoio1968 4 месяца назад

@@FloorsbySouthernboys Sometime this week I’ll send you papers on pressure sensitive products that we use we had class delivered to Lowe’s on these programs . Rollers are not supposed to be used and you would have to show me or tell me where you think I’m wrong. I carried a perfect score in last two years on anything I’ve ever done . Now I’ll will admit on paper back products and hard goods we used rollers but it’s pretty much stopped in pressure sensitive applications especially when using a Knapp roller . Also could it be your using a congoleum product? I know what Armstrong recommends

@stevemuoio1968 4 месяца назад

@@FloorsbySouthernboys I use a push board or it says push broom . I’ve never been back on any vinyl jobs in along time. I live north of you next state up 35 years experience. Believe me I wouldn’t do anything I shouldn’t. Reason for underlayment is to prevent nails from coming back through only and they will in time. Might be one year might be 10 but wood exspansion will cause such issues. Plus that wasn’t a good subfloor I wouldn’t back it with nails used only if it was screwed.

@stevemuoio1968 4 месяца назад

@@FloorsbySouthernboys Mapei product glues

@user-tg5ux3ii2g 4 месяца назад

Whats the new footwear you got there Reuben ?

@FloorsbySouthernboys 4 месяца назад

A pair of Carhartt boots. I went on a big commercial job a while back and I had to wear steel toed boots and hardhat and a safety vest while I was there kind of like the boots so I went and bought a nice comfortable pair.

@billysmith9347 2 месяца назад

What kind of boots are you wearing?

@FloorsbySouthernboys 2 месяца назад

Carhartt

@billysmith9347 2 месяца назад

@@FloorsbySouthernboys Awesome. Thank you

@russellmcgillivray 4 месяца назад

What are you filming with?

@FloorsbySouthernboys 4 месяца назад

My phone, iPhone 14 Pro Max

@Deanddori 3 месяца назад

What brand of flooring is that?

@FloorsbySouthernboys 3 месяца назад

I’m sorry but I can’t remember

@rossclarke7692 4 месяца назад

Is that Luke doing the dry-cuts, etc?

@FloorsbySouthernboys 4 месяца назад

No sir

@jb-es5zj 4 месяца назад

i dont think luke is married [see the wedding ring]

@Michaellove85 2 месяца назад

Why not use underlayment

@jacobbuckley8232 3 месяца назад

U dont let Luke trim anything?

@jb-es5zj 4 месяца назад

sheet vinyl made easy yes put quad all round easy that seemed like alot of glue even though you did roll it if its pressure sensitive wich it didnt seem to be runny enough to be so , arent you ment to let it dry /set before you put the vinyl into it most of our vinyls here [australia] now are softback felt i just use a flat trowel with pressure sensitive glue and rub the air out with a board with some carpet in it i would have made some more measures and cut tha baby right down when you had it out side mark a spot on both ends and mark that same spot on the floor at both ends and line them up then fiddle with squareing it up also i would glue it all up before making final cuts just in case it moves when folding it back but if yor using quad its probably not that important thats my 2 cents worth happy days

@FloorsbySouthernboys 4 месяца назад

Yeah, it was pressure sensitive adhesive. I used 16th and 16th 16th square notch which is what you’re supposed to use for a porous substrate. I actually went to the Carpet store and got Seam sealer while the glue was flashing.

@stevemuoio1968 4 месяца назад

Why didn’t you just lay underlayment down? One layer vinyl- I wouldn’t lay over that subfloor- plus had nails that in time will come through. And I’ll take my carpet knife against you any day lol

@FloorsbySouthernboys 4 месяца назад

😀👍

@jb-es5zj 4 месяца назад

a knife is a knife its just what your used to i use a stanley knife 99e [for those that know em ] retactable blade for carpet /vinyl /planks /everything i dont change blades ie hook or straight or whatever i just use the old style straight blade fo everything im wondering if you glue the underlay you mentioned down they have made it a standard here in australia more work n messier

@stevemuoio1968 4 месяца назад

@@jb-es5zj no if you could see how much staples go in it , no need to. Now we do glue subfloors to joices ( spelling) lol . And your right a knife is knife . I use carpet knife because of carpet- cut everything with it even underlayment. Luan- sureply

@jb-es5zj 4 месяца назад

@@stevemuoio1968 yes i dont undrestand why we have to glue it i would hate to have to try n take it up being glued and 100 odd staples in each sheet

@terenceharley7081 4 месяца назад

Pattern scribe would’ve been so much easer and a better job!

@terenceharley7081 4 месяца назад

Try using a hook knife to cut vinyl in. I went to Armstrong vinyl school and they made and taught you how to do vinyl the right easy way. You’re a carpet guy that can do vinyl but you’re making it much more difficult than it has to be

@FloorsbySouthernboys 4 месяца назад

I have done it both ways and I prefer this way. Might as well only cut it once there’s no sense in cutting paper then cutting vinyl I just do it once and be done.

@FloorsbySouthernboys 4 месяца назад

@@terenceharley7081 I’ve been doing vinyl just as long as I have been doing anything else. When I started floor guys were floor guys, there was no idea Carpet or I do vinyl if he was a floor guy you did it all.

@jonathancowdin3775 4 месяца назад

He's right about the hook knife but you don't need to tar paper scribe this, it's not linoleum or forbo that's going to break if you crease it, you'd be taking unnecessary steps bud

@FloorsbySouthernboys 4 месяца назад

@@jonathancowdin3775 exactly