Shoei Neotec II Sena SRL Communicator Install | Sportbiketrackgear.com 

Just finished my installation. Thanks for this incredibly helpful video!

Thank you so much for guiding through the installation. Very good job 👍

One of the best tutorials on this I’ve seen yet. Great video and instruction

Thank you! There’s no way I could have done this on my own. This is my first motorcycle helmet and I have never removed any parts of it before. It’s also my first time installing something like this. Whew. An hour and a lot of rewinding because I’m new at it but your video was great.

Thank you for taking the time to go through the install, without which, I would have struggled I've no doubt.

This video was excellent. It made the installation really easy. Thank you

Thanks for the great information. I love my new Neotec 2. Now just waiting for the com unit!! Need to save a few bucks 😩 before I pull the trigger on it. Thanks again. Great job installing it.

You’re the GOAT Brian Van. Life saver. Made it easy work for me.

Thanks, this is the best installation video I've seen so far, very clear and concise, with good lighting making it very easy to see and follow along.

Excellent instructions, especially the zoom-in makes it very easy to follow. Thanks a lot!

Excellent guide, had mine installed in minutes, clear concise instructions for us all.thank you

Great job, I just installed my SRL while watching your video. Thanks for the help, it made it much easier.

Excellent!! Thank you in particular for being conscious of camera angles to show what you did!

Great video. Just ran through to install my intercom. Brilliant and many thanks from the UK.

A brilliant video much appreciated just waiting for my Neotec 2 and Sena Comms to arrive ....

Best video on the install

Right on my man! Thank you for the detailed install.

Thank you for posting such a clear and concise explanation of the process.

Perfect. It was way easier to do this using your video than following their pictures.

thx for the video. only because of this video i did buy the neotec 2 with SENA. If there would be no video like this, i would get a rage by installing this and use it without the SENA. Videos like this are gold! Thx very lot. The Quality of the SENA System is awesome, i just did a test and LOVE IT! Greets from Germany.

Excellent method!! I follow and result was great.

Fantastic video. I opened the manual and felt like I'm either incompetent or the instructions assumed you had done this before.

Your video saved my bacon installing the SLR into my new Neotec 2. Bless you my Son. (-:

Very helpful and comprehensive - thank you

Excellent tutorial. Made the installation extremely easy. Thanks.

Thanks for your time , i have a 3 day bike ride and i fitted it the night before cheers

Great video Brian.

Thanks very much from the uk. Was dreading this job a bit but all went well👍.

Gracias Muchachos! Big help for me to be able to get this system into my Neotech-2 lid. Good job 👍🏾

Thanks for posting this. Like you I found the pictures-only installation guide just about useless. Even with your excellent video, I had to stop and backtrack the install three times before everything fit and went back together seamlessly. It may be “made specifically” for the Neotec II but it’s still a fiddly process!

Excellent demo

very helpful video. It worked on the first try. thanks and greetings from switzerland, Thanks Rolf

great video sir!! made the install 100 times easier

Thank you. Great video. Took all the mystery out of the picture instructions. Time for me to go install it now. :-)

Top shelf no question about it and you get what you pay for with Shoei helmets a must have on road trips or everyday use. Do you remember the days when we used hand signals....technology has spoiled us

Great instruction Brian, installing on this cold MI winter day, took my time and got a near factory result...Thanks

Excellent detail in steps to remove plastic parts. I hate plastic snap together parts. Push or pull the wrong way and they easily break.. Good detail here to show how to get it apart without breaking it.

Hey this video really helped me out! Enjoyed the video and thanks a lot

Thanks for the detailed help. Appreciated!

Really useful guide to fitting the comms unit. Thanks

Very detailed and easy explanation! Thanks... now Im ready to instal my Sena system :)

Thank god for this install I could not get it done from the picture book that came with it!

Great installation instructions ! Thank you so much

Terrific job on the video. Thanks very much!

Excellent overview

Thank you so much! I'd never done anything like this before and I managed this on my first run through. Nice job on the walkthrough video.

A really helpful video, thanks!

This video is the best!

Thank you. The video was helpful. Now maybe you can make a video on how to remove the SRL for those of us that jumped the gun and installed it on a helmet that was the wrong fit ;)

Awesome video

Excellent video !

Good video. I'm gonna get the Sena for my Neotec 2.

Thanks, great help on the install

Thanks mate.

Great Video!! The instructions that came with the Sena are just pictures and not very good at detailing out a correct installation. Thank you for taking the time to make this video.

Thsnk you very much, with your explanation very good

fantastic tutorial!

Cool! This will eliminate much trail and error.

Thanks for the great video install. It really helped.

Excellent video. Thanks Well done

Best video on youtube!!!

Nicely done, thank you.

Very helpful, thanks a lot!

Totally helpful - might have to replace my SRL 01 unit. I will try fault reset first. Unit battery time down to only 4 hours.

Fantastic video thank you 🙏🏼 . The instructions that came with it were crap and the video from Sena was too fast. Now I have it fitted perfectly

Great step by step , thanks. I am wondering if we can mount a Senac 10C pro on this helmet (Neotec II) thanks

Excellent helmet and comms ..

I don't know about anyone else, but the wiring on the slide in side pieces were the only real issue with the install where I felt a little let down by the design. Everything else was absolutely instinctual. The problem being that the side flanges on the cheek pads need to be able to reach down quite deeply to hook into the pins, and you just lay quite thin wires right across it's path that need to be tucked away, and there really isn't any good location for them. The official Shoei install video simply warns to not have them in the way of the rear pin to allow reinstall of the cheek pad, but then rushes along and doesn't explain how. I think you did a great job here of at least highlighting the need to push the wires in and down, but I can't help feeling they simply made these wires too long. I mean.. I installed on a large shell helmet. Is the XXL really in need of 3 or 4 more inches or wire on each side? I don't think so. I imagine this issue on a small size helmet must be really quite a pain in the butt. If they'd designed some kind of channel or through hole on the cheek pad flange itself to allow the wires through or a place to run alongside rather than needing to be sandwiched right against the inside edge of the helmet while at the same time re-engaging those hooks.. It might have allowed for a simpler install. It looks great when it's all together, but I found myself feeling disappointed in that aspect of the install alone, and because of the cost, feel this could be an area of wire failure down the road. It's a bit sloppy for such an expensive product.

Great detail. Thx

🔥🔥🔥🔥🔥🔥🔥🔥

Very nice instruction video. One will run into problems when just relying onm the couple of pictures in the Sena manual, Sena and Shoei should put a link on it. Thank you very much!

Nice job very helpful do you do one for the set up as I am having issues a right pain in the check pads

thank you !

Thanks for these instructions. The quick install guide was absolutely USELESS. Half the steps were missing (like removal of the cheek pads) hence the reason I arrived here to find someone actually showing me how to do it IRL. Your video guide was really clear and now got everything installed and routed beautifully! I presume the ear pads that are removed can be left out since the new earphones have a sponge attached?

Very helpful. Just got the Neotec II and decided to try to fit my 10R in it. Nope. There was no way to make the mic work. I could jerry rig the speakers but had to have a mic. Ordered this unit. Sheesh...a $1000 helmet with the Sena. And to think my first helmet was a $100 Bell.

Great Video I just bought this helmet today and I will now buy this communicator to replace my Card Q3 I tried to mount the Q3 on this helmet and it just does not work. again thanks for the great video

For anybody that doesn't want to deal with the SLR's cruddy audio quality, the Cardo Packtalk series are pretty dang easy to install on these helmets. Just put the interface a touch farther back then you normally would with the glue plate and everything else is cake. The JBL speakers on the Cardo system blow these speakers away if you care about it. Plus, the area where you would put the battery is now a nice little storage spot for whatever items you want to stash.

Thanks, buddy! You made that far more straightforward for me to do than it would have been had I tried to follow those cockamamie cartoon intstructions. 👍🤟

Hi Super Video ... Would like to connect the SRL with an other helmet Nolan which has B5 N-com... It do not get that working ... do someone have an idea how ? Thank you

Hi bud. How do u compare this helmet compared to the Schubert C4. I see with the c4 it's much easier as the Mic and speakers are built in and the sena unit just slots at the rear. Do u know how the sound compares to this unit ? Thanks

Is the sena compatible with other sena ,,, ie sena smh 10 r

2 new Neotec Helmets. 1 new SRL, waiting for 2nd (availability issues til July,). 2 new freewires for 2017 HD Ultra. Can’t get SRL mic working via srl to freewire to boom to iPhone. Gotta go directly from srl to iPhone. Also can't get SRL to Prism camera working either. Sena tech support acknowledges this is an open issue. (I would have not made these purchases had I known...)

Have you guys ever done a video on the Healtech obd tool? Would really like to see that.

I wonder why shoei went this way with Sena and not the same way as schuberth c4? The Sena for the schuberth may not be as technical as the one for the shoei but I love the integration and to be able to swap battery’s out is a plus, having no microphone stuck in my mouth is also nice.

So where does the charger plug in? How do you update firmware? Does the microphone grab my glasses? And yes, I would have liked to have seen you pair this with a GPS and a phone.

How do you answer the phone on that thing, i just don't see the bluetooth module

May I ask what motorcycle holder ring that is you're using? I can't find it for sale anywhere. Thanks!

Very helpful video..If you have the Neotec 1 (which i do) Sena make the 10U which is similar.

It's not necessary to detach Center pad bonnet. I'm installing right now according to Sena instruction

Hi!does sena srl for neotec 2 fits on shoei gt air 2?thanks!

Great video! What is the difference between this SRL and the new SRL 2? I understand the SRL 2 fits both the GT Air 2 and the Neotec 2 (newly produced?). Just bought a new Neotec 2 & SRL, and heard the speakers on the SRL is not-so-good. A guy behind me in the lineup suggested to replace the speakers with Bose ones...but if the new one has better speakers I would return the SRL to get the SRL 2.

Does it have to be with this helmet it can it be with any shoei helmet

So I won't need a blowtorch and sledgehammer?

Unbelievable.

After seeing a Video at the Shoei Factory and how Shoeis are hand made with a lot of quality control .. I think this wll be my next Helmet.. Too bad I already chose a Cardo Pak Talk slim.. As cardo has 100% Water proof resistance stands behind their Warranty better and is said to have better customer support. So it's all installed .. I know nothing about the available controls on this Sena.. Not mentioned in this "Install" Video .. I assume you simply plug your USB Charger cable into that back unit Obviously while still installed on the Helmet.. I suppose I will have serious issues trying to install my already paid for Pak Talk Slim Blue Tooth on this Helmet.. Then again switching from one Helmet to the other would be a time consuming hassle every time.. Also I don't even know if this Sena works with Voice commands or not???

Thanks for the excellent instructions! I gotta say it was a little like watching soft porn the way you “teased” those wires in so gently and got the module to “dip in real easy” 😆😆😆

This fucking unit had me soaked in sweat swearing up and down for 2 hours before I got it to fit, now here's hoping I didn't fuck up any of the tiny ass wires

Love, it, helped me out a ton, the senna video and instructions is utter garbage.

Does this communicator sound good?

Mine has these weird left and right pieces that look like antennas. nothing is covered in the manual or in tutorial videos. Sena needs to step up their game