ShopSabre CNC - Creating Beautiful Reeded Doors and Door Fronts 

Sounds like a great project!

Rift White Oak

We are the CNC manufacturer - ShopSabre.com

They can be many difference style - just depends what bit you select -- Vortex Tool is a great resource for sourcing the bit of your choice.

Becker Vacuum pump with our HiFlow vac technology

@@shopsabre I have the Hurricane. It won't hold down my parts any near what you show in that video.

@garyh5181 yes, the hurricane is very under powered for such attempt.

tooling feeds and speeds are variable based on chip load rating for the tool itself. The Tool manufacturer should be able to supply you with that.

You can purchase them through our parts department by call 952-461-4570 M-F 8am to 5pm cst

We did not have any chipping issues on this project

@@shopsabre what’s the pass depth on those?

@@jweeks1995I will try to gather that information for you but if you have a ShopSabre the full lesson will soon be available for SabreNation University which goes through the tool path. In the meantime, tech support is available to go through technical questions as well.

These are 1/4" beads so roughly 1/8" depth

No, typically if done correctly with the right materials it should not be an issue.

@@shopsabre You would think otherwise from the feedback I get from door manufacturers telling us how difficult these are, hence so expensive.

@@Curious_Skeptic well difficulty level is all dependent on the process, tools, equipment, staffing, software, etc. I cannot speak for their business model

These warped. Ask me how i know😂

@djhighgloss the ones we made for this video are still flat here in the shop.