A potential "fix" for the bolt handle is add some locktite you get a pretty good grip on it anyways so you can twist off the loctite if needed but it might not come off in use
You can reverse the stock folding direction and snipe with it while it is folded. Thats how I run it. Edit: Novritsch also sells a TDC kit especially for the A3 and it's awesome. I know the stock and TDC is actually made by Maple Leaf but getting these items through Novritsch is faster and easier.
I wouldnt buy any of his guns, they tend to be a bit overpriced for what you are getting, nov uses kjw as a oem for the ssp1 and ssp18 so here in the u.s we can get the kjw ones for a lower price. The ssg10a3 is a bit overpriced also, it uses the same internals as the ssg10a1 but he changed the stock. The price should be around $50 less for it but that doesn't include the fact that he most likely gets the parts for a lower price so that number very well could be higher
@@kamea2202 he upgrades most of his guns by adding a barrel and bucking, his ssp1 has a dyed bucking that tears very easily and some purple feeding lips
Unfortunately it kind of comes down to why you buy one pair of jeans over another. The feel/name. In my unbiased opinion I think what you get is good and I personally like the look. But you can always buy the same parts for a few dollars less. Though the warranty is a nice feature. So all in all buy it if you like the look, and are too lazy or can't tech yourself. That goes with all of the products.
This is a modern styled sniper rifle, this type of stock is called a chassis and it's what all special operations either have moved to already or are in the process of converting to (funding permitted). The style stock you prefer are older and dated and are not considered current.
loctite would fix the bold handle i guess, i dont get why these "pro snipers" always have a rotating bolt they dont have to hold any pressure and straight pull would be quicker
If u reload underhand you actually tighten the bolt (cw) like you should, keeping low profile.. But If u pull the reload from the top, it is able to unscrew (ccw).. Maybe some dedicated tape on the thread, might add some more friction for you or even lock tide, if u do not want to change the looks.. But then again when u are reloading underhand both should not be needed.. Cheers!
I think another very simple solution to the bolt handle issue is using some good thread locker. Especially if you don't think you're going to change it.
Год назад
I'd simply drill a side hole to the shaft and place a set screw. Done.
@@JudeOhHecc the majority of it is overpriced, over hyped and performance is nowhere near what is claimed. Rebranding an already existing system is not innovative nor does it help make airsoft better. But, that's my opinion on it, if someone wants to purchase his gear, that's on them.
To be honest just apply a drop of Loctite or superglue on the knob of the charging handle. Hopup adjustment is like that on all VSR style rifles, annoying sometimes but it is what it is.
Get the TDC 2.0 PRO. Use medium screw glue on the boot handle. That fixes the two issues you seem to have. The skeleton frame may look odd but once ghillie wrapped doesn't matter what it looks like...it is light at 4lbs
Nice vid man as always but this time I have a request can you reveiw the tactical force 6xp from airsoft station and see how well it does on the field?
If you want this gun, but can’t afford all of the money for the name brand, just buy the cyma cm707, same sniper stock, basically same performance, for a literal fraction of the cost. Good airsofting, y’all
Is the body from aluminum or plastic and does the grip and cheek pad have rubberized feel or is it hard plastic? (Just use simple Loctite for the bolt handle, it solves your issue)
ayo rev go review the 6mmproshop mk18 mlok from evike, it looks good so i considered buying it, but im not sure how it performs, would be cool if you reviewed it.
I'm sorry I have to do it. The ssp1 and ssp18 are rebranded kjw pistols with a higher price tag, the sse18 is a cyma aep and most aep's are bad in general, the ssx23 is a stti mk23 that usually costs around $50, the ssx303 is a ssx23 with a carbine kit and gas dmr's are not that good of a option, the ssr15 is a vfc Avalon with a gate titan basic and some pts externals, the ssg10a1 and ssg96 are decent but it's better to build a rifle because novs snipers are not perfect(they are not upgraded that much), the ssg10a2 and ssg10a3 use the same internals as the ssg10a1 but he raises the price due to the stocks. Most of his guns like the ssg10a2 and ssg10a3 cost more than they should but you also have to remember that nov most likely gets all of the guns and parts for a lower price due to wholesale and other stuff. Another thing about nov is his customer service, all of the story's I've heard make me think that his customer service is a complete shit show, they will say that you broke the gun so your warranty wont work and when the ssx23 was released we all got to see the "you are pulling ze trigger wrong" meme(from cards32 on RU-vid)
@aidanengebretson1822 SSP5 is good tho sure The lower is a KJW but the upper is a completely new design that no one's ever seen before. And it's actually pretty good too i'm getting 1.7J at green gas
Hey I have a legitimate request for a review, there’s a 99$ famas valorisé on eBay, it’s says abs, but other than that it’s says it’s an aeg but refuses to elaborate on anything else, it’s called academy fr 5.56 full size electric airsoft rifle
