Should YOU Make Your Own Cables?

Подписаться 16 млн

Просмотров 1,7 млн

50% 1

Get $20 off the Drop x Sennheiser PC38X Gaming Headset with code DROPTHIS at dro.ps/ltt-pc38x-off
Offer ends Sept 29th, 2021
Get your G.Skill Trident Z Royal Elite DDR4 Ram today at: lmg.gg/RoyalElite
Custom cables can be expensive, but parts and tools are too. Is it worth it to try to build your own? Watch Alex and Anthony try to put together their own USB A-C and 8-pin PCIe extension cables for the first time.
Buy USB-A Cables
On Amazon (PAID LINK): geni.us/jv2G
On Best Buy (PAID LINK): geni.us/dU6k9U5
On Newegg (PAID LINK): geni.us/8epSMAD
Buy USB-A Housings
On Amazon (PAID LINK): geni.us/WM6LsfW
Buy USB-C Housings
On Amazon (PAID LINK): geni.us/WivANj
Buy 18awg Wire
On Amazon (PAID LINK): geni.us/vSnH
On Best Buy (PAID LINK): geni.us/8ZLNkG
On B&H (PAID LINK): geni.us/V6XMAOm
Purchases made through some store links may provide some compensation to Linus Media Group.
Discuss on the forum: linustechtips.com/topic/13688...
►GET MERCH: www.LTTStore.com/
►SUPPORT US ON FLOATPLANE: www.floatplane.com/
►LTX EXPO: www.ltxexpo.com/
AFFILIATES & REFERRALS
---------------------------------------------------
►Affiliates, Sponsors & Referrals: lmg.gg/sponsors
►Check out our podcast gear: kit.co/linustechtips/lmg-podc...
►Private Internet Access VPN: lmg.gg/pialinus2
►Our Official Charging Partner Anker: lmg.gg/AnkerLTT
►Secretlabs Gaming Chairs: lmg.gg/SecretlabLTT
►MK Keyboards: lmg.gg/LyLtl
►Nerd or Die Stream Overlays: lmg.gg/avLlO
►Green Man Gaming lmg.gg/GMGLTT
►Amazon Prime: lmg.gg/8KV1v
►Audible Free Trial: lmg.gg/8242J
►Our Gear on Amazon: geni.us/OhmF
FOLLOW US ELSEWHERE
---------------------------------------------------
Twitter: / linustech
Facebook: / linustech
Instagram: / linustech
Twitch: / linustech
FOLLOW OUR OTHER CHANNELS
---------------------------------------------------
Mac Address: lmg.gg/macaddress
Techquickie: lmg.gg/techquickieyt
TechLinked: lmg.gg/techlinkedyt
ShortCircuit: lmg.gg/shortcircuityt
LMG Clips: lmg.gg/lmgclipsyt
Channel Super Fun: lmg.gg/channelsuperfunyt
Carpool Critics: lmg.gg/carpoolcriticsyt
MUSIC CREDIT
---------------------------------------------------
Title: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro Screen Music Credit: Approaching Nirvana - Sugar High / approachingnirvana
Intro animation by MBarek Abdelwassaa / mbarek_abdel
Monitor And Keyboard by vadimmihalkevich / CC BY 4.0 geni.us/PgGWp
Mechanical RGB Keyboard by BigBrotherECE / CC BY 4.0 geni.us/mj6pHk4
Mouse Gamer free Model By Oscar Creativo / CC BY 4.0 geni.us/Ps3XfE
CHAPTERS
---------------------------------------------------
0:00 Intro
1:04 Why bother?
1:45 USB Materials and Tools
3:50 Sleeving
5:18 Soldering
6:36 Testing
7:55 TechFlex and Coiling
10:10 PCIe Materials and Tools
12:15 Crimping and Sleeving
14:52 Install Wires
17:33 Testing
18:30 Conclusion
19:49 Outro

Наука

Опубликовано:

19 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3 тыс.

@danieleckert3508 2 года назад

Some corrections to the part from 2:58 - 3:20 No, a C-C cable does not need any resistors to work properly, but it'll need a fifth wire, the CC wire, needed for assigning power and data roles and power levels. The part of the spec you've shown, with the 5.1 kΩ resistors is not for cables, but for receptacles: Any USB-C port intended for recieving power will need two 5.1kΩ resistors, so it'll be correctly identified as a power sink. And an A-C cable. like you've created. actually needs a resistor; a 56kΩ resistor between one of the CC pins and Vbus to operate properly - I hope for you that the used breakout board already had that resistor installed, these kind of boards usually do.

@radium9 2 года назад

This needs to be higher up.

@nimoy007 2 года назад

This should be pinned

@disc0very 2 года назад

Yep

@BaxBunny 2 года назад

When I was watching this I thought it was weird that they said that you didn't need the resistor for the usb A to C cable. I specifically remember running into this problem when I was buying cables for my nexus 5 and 6p phones. Daniel has it right here, and LTT should address this!

@gyulamasa6512 2 года назад

And also the wire color sequence matters! The green-white wires are for data and they are twisted pair. So, if you group red/black with white/green, it most likely will not work, or it will work with really slow speeds. Of course, if you just want to use it for charging, it is theoretically OKay.

@Fatty420 2 года назад

Put Anthony in the thumbnail and wait half the video for him to appear? You're playing a dangerous game there, Linus

@LakeVermilionDreams 2 года назад

I'm 5 minutes in and was worried about the same thing!

@karehaqt 2 года назад

@WHO LOVES OLIVIA Stfu

@bmora2133 2 года назад

I read this before the video starts and idk if I want to watch it... He's the only one who interests me really. He knows so much it's interesting

@lecogti177 2 года назад

Most people praise Anthony because they feel sorry for him.

@hrishabh 2 года назад

@@lecogti177 lmao not even close. Most of us like him for his soft sound and his extreme depth of knowledge

@okamikfp5660 2 года назад

Linus: why do you want to work at LTT? Anthony: I like orange. Linus: you’re hired.

@jake_3745 2 года назад

YEP thats what qualifies Anthony xD

@justlixian293 2 года назад

you forgot he says that in the most nicest and easily understandable voice tune

@okamikfp5660 2 года назад

@@justlixian293 Thank you FBI agent 🙏

@kerbain 2 года назад

Can you say "water bottle"

@kulareddy5331 2 года назад

Later Anthony talking to himself, “I like 🍊 🍏 🍌 🍉 🍑 🥝 🥭 etc”

@cris_crafter 2 года назад

The Order you solder them on actually matters. The Green and White Cables are the data wires and are twisted with eachother. If you use the red or black wire as the data cable, you might get issues with the connection reliability. Especially over longer distances. So, if anyone want to do this on their own, just remeber that. :D

@tapatazapata5970 2 года назад

In addition to that, red and black can be thicker / lower AWG, so if you mix them up you could also have unnecessarily high voltage drops when charging / powering devices (yes RasPi, don't look away...)

@cris_crafter 2 года назад

@@tapatazapata5970 Haha, I totally forgot about that one. Also, I cant remember a single time where my RasPi didn't show the flash symbol. lol

@Helveteshit 2 года назад

Depends on the cable. Not all cables got twisted pair. Might just be four twisted wires, which reduces noise equally well. To take an example, most cheaper CAT4 tend to not be twisted pairs.

@_s_9920 2 года назад

twisting them together helps stop interference from rogue frequencies both from the power supply as well as from outside equipment such as wifi, radio receivers, lighting etc.

@chaos.corner 2 года назад

@@_s_9920 Yes. This is also why they are D+ and D- and not just one cable referenced to ground.

@frankgrimes9299 2 года назад

Pro tipp: Before removing the core from the paracord just glue it to the cable you want to have as core instead. Then simply pull the core from the other side.

@mattshaile1721 2 года назад

Came here looking for this, sounds simple, does it actually work?

@EVILLASER 2 года назад

Holy geez, Batman. If that works, you just made my life much, much easier as it pertains to building custom cables.

@RirtyDascal 2 года назад

Learned this type of trick as an electrician pulling out old conductors from conduit while also pulling in new ones.

@10throwfilms Год назад

What kind of glue? Super Glue?

@der_rechtsamwald Год назад

If you're building lots of cables, fe a 24pin, it's also easier to build one very long 10meter cable with this technic. Afterwards just cut it in peaces.

@user-neo71665 2 года назад

When you coil the wire: After it's cool take it off the metal rod and twist the cord backwards so it coils back up. That will make it springy and tighten up the coils like a store bought cord.

@pawanyadav9854 2 года назад

wdym "twist the cord backwards"

@WRSTxPumbaa 2 года назад

@@pawanyadav9854 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jU8oGeoS8A0.html

@JaredBusch 2 года назад

yup, in fact, it's paramount to a proper cable coil!

@agustiomaitimu144 2 года назад

@@pawanyadav9854 like re-coiling it, but inwards

@user-neo71665 2 года назад

@@WRSTxPumbaa That's long and drawn out. I just clamp one end to the edge of a table and twist the other end till it's done. I don't rewrap it around the rod. Unless your doing a few feet it's not really hard.

@iloveshw 2 года назад

As for the colors of the cables for USB - I would suggest keeping to the standard (red - power positive, black - power negative, green - data negative, white - data positive). First of all - it's color-coding so a person fixing it would know what to expect. Second of all, I had experience with cable where red and black wires are thicker since they potentially carry more current. So making sure that they're the same on both sides protects you from destroying devices you connect, following a color code helps in the long run - protecting the cable and making fixes/changes easier.

@BrianG61UK 2 года назад

YES YES. You need a proper twisted pair to be carrying the data. If you mix the pairs or even use the wrong pair it's not going to work reliably.

@falsemcnuggethope 2 года назад

@@princes2623 too cheap to buy a domain name for you spam?

@dankmemes3447 2 года назад

@@falsemcnuggethope domains can get revoked, he's eliminating a potential point of failure by directly using the ip.

@PeterHertel 2 года назад

@iloveshw was going to comment the same thing. Standards do matter, do it properly and follow them. Slightly related I worked for a guy who relocated a utp patching rack and had to cut all the ends. He wired them to code and nothing worked. He then found out the person who installed them didn't care about the colours and just did them randomly (albeit the same on each end). He ended up having to terminate all the cables on both ends.

@preciousroihomeshoppingnet7908 2 года назад

@@PeterHertel I know someone with a house that has 2 runs of cat 5 cable to almost every room in the 4-bedroom 4 and 2-1/2 bathroom house running down to a central punchdown board...all of them are wired as phonelines. I'd fix it myself, but looking at all that spaghet, I don't know how to do it properly, ideally they'd all terminate to a switch or hub or patch panel. In reality she needs like 1 or 2 phone lines (1 to her bedroom and 1 to kitchen where cordless base unit lives) and the rest could be ethernet.

@LRM12o8 2 года назад

9:37 apparently you can make the coil springy by "reversing" the coil, meaning wrapping it around the stick in the opposite direction to which it is coiled. This should add tension to the coil and make sure it contracts back to shape after it's been expanded. I will give this a try, when I find the time.

@NijiharaKaito0 2 года назад

I like your name. YT could at least have given us a toggle for this "feature".

@pebble.s 2 года назад

Yep, reversing the coil works really well, I've tried it

@Litruv 2 года назад

also, use an oven instead without the connectors on, I use oven ~1/2hr before reversing, and 1/2hr after reversing @110c

@JBantha 2 года назад

i tried it myself. it works great

@BenRajan 2 года назад

9:37 It's actually really easy to make your coil spring. Just follow what they did to make the coil, then when it cools simply rewrap the coil around the rod again but this time go in the opposite direction. The tension makes the coil really springy.

@3nertia Год назад

I don't s'pose you'd know of any videos about this off the top of your head?

@jasonwalon5470 2 года назад

I like where this is going. Maybe we are going to see a PSU build next time

@llortaton2834 2 года назад

i dont see how this could go wrong, teaching linus subs to build a psu.

@jordananderson2728 2 года назад

@@llortaton2834 It'll probably explode and then the user will get blamed. Wait. Wrong company.

@CatsMeow_ 2 года назад

Can't go worse than gigabyte...

@darkwingduck7247 2 года назад

@Anna I didnt know that 😨

@jasonwalon5470 2 года назад

@Anna aye fam, that was unexpected but you made me cry

@hikaritsumi2123 2 года назад

"Have you done it before?" "No" "Perfect I haven't either" That make me laugh so hard

@glitchmanshandle 2 года назад

@@DemeDemetre Same

@DeerJerky 2 года назад

@@princes2623 thanks for your website's ip

@michaelbraaten 2 года назад

I sleeve cables professionally… this was hard to watch lol

@jkmorbo 2 года назад

That and when Anthony said "I like orange". Anthony cracks me up sometimes lol

@mrmattbassett 2 года назад

I don’t understand why anyone would want to do this. It seems like it would cost more money and time then just buying online. I can find all lengths and color in 30 seconds for under $10.

@KiwiKeebs 2 года назад

6:30 - isn’t that technically incorrect? Green and white in proper USB cable are a twisted isolated data pair which should be used on the data lines as far as I know

@LMojzis 2 года назад

No, the proper explanation is "F*CK THE STANDARDS". What do you want, an accurate information and LESS pribability of fire? Are you new here? /s Obviouisly I'm joking :D EDIT: I already fixed 1 typo. This'll have to do...

@DasKloputzer 2 года назад

yeah the blondie has no idea what he's doing

@GodLike-pe6kj 2 года назад

Often the power wires are thicker as well... I wouldn´t try mixing up data and power wires, the standards are there for a reason.

@chaos.corner 2 года назад

Linus should never joke about tweezers again after putting this video out.

@kb3khs 2 года назад

I was logging in to say this exact thing. Data lines are a twisted pair for differential signaling and power lines are higher gauge in quality cables... order matters... the rate of twisting and number of twists overall matters.... not just any wire will work... you need shielding as well... anyone attempting this should do their research.

@kitsunesenpai441 2 года назад

No idea if someone has already mentioned it in the comments - but Alphacool has a "crimping kit" containing all the necessary tools - and yes Anthony, the crimping pliers has a ratchet. :D But the really great thing about this kit is that it contains a sleeving needle - the cables can be easily dragged through the sleeve. And a tip: If you use Paracord, you can crimp the sleeve together with the cable jacket in the pins, so you need not "ugly" shrub hoses or melted sleeve for fixing the sleeves.

@alianlammers9025 2 года назад

Note: for usb cables it is important wich wire goes to where on the connector because the red and the black are for power and just go straight through but the 2 data wires are a differential pair so there twisted together inside the cable to keep both interference from outside out of ur usb data and to keep the usb data itself from interfering with other stuff. Have a good day y’all

@kstricl 2 года назад

Came here to see if anyone else caught that. The power leads are often a heavier gauge as well to better handle current.

@Jpeg6 2 года назад

Came here to say the same thing Plus is generally good form to use correct wiring since if you have to fix one side or attach another end you may not know how it was wired.

@OgbondSandvol 2 года назад

Came here to agree with all of you. An experienced guy would prefer to buy a cable, ever!

@hellterminator 2 года назад

Yup, that was an instant dislike. If you're making a tutorial that will be seen by literally milions of people you *have to* do it right.

@tehbest 2 года назад

I would have probably told the viewers the correct way to do it and suggest to use the conventional pinout, despite it probably working either way

@M.C.Turnt69 2 года назад

14:56 Also, if you frequently plug and unplug the cables....it might be a good idea to apply a VERY small dab of hot glue where the pin meets the wire right before putting it into the housing to ensure it doesn't come out at any point. I had this issue when sleeving molex back in the day. They had a bad habit of coming out.

@The_Cyber_System 2 года назад

I have no interested in doing custom cables, so this was something I had playing in the background while working. But I'm actually doing a separate DIY guitar project and the soldering tips on display here are actually super helpful for that. Unexpected advice is the best!

@irishgiant5150 2 года назад

It's funny how DIY instructions often mean the concept is poorly executed and poorly shot. We both need to see it being done up close, and see it done well. Meanwhile high end products and car videos often get top notch camera work, which isn't a bad thing, just feels bad by comparison.

@officialspaceefrain 2 года назад

Why no close ups right? I wanted to see the soldering and the crimping but left dissatisfied

@martinjose6273 2 года назад

Yea I felt the same!

@jpaugh64 2 года назад

It takes a lot of effort to make a high production-quality DIY tutorial, plus lots of prior experience. If the topic's niche, don't bishe.

@jo09oi 2 года назад

Marketing money

@PabzRoz 2 года назад

This might be the worst tutorial I have ever seen for custom cables lol... We can barely see anything being done up close. They made this seem way more intense and difficult then it actually is and if I was new to this it would definitely steer me away from trying. Good thing there's plenty of fantastic tutorials out there on RU-vid for making custom cables like this.

@MickBasterd 2 года назад

Watching Anthony try to keep a straight face when testing his cable was the highlight of my morning.

@kulareddy5331 2 года назад

What?

@anomalousresult 2 года назад

@@kulareddy5331 WATCHING ANTHONY TRY TO KEEP A STRAIGHT FACE WHEN TESTING HIS CABLE WAS THE HIGHLIGHT OF MY MORNING.

@kulareddy5331 2 года назад

@@anomalousresult weirdo

@Brunghis 2 года назад

Anthony is always a treat to have. His grin every time the counted off the multimeter is precious.

@jasont659 2 года назад

Ahh, brought back memories of back in the days (2000's) when I worked in a computer shop and people would pay us to customize their power cables for gamer computers. The first module power supply just came out, but rest of them I would have to sheath them on the power supply after popping off the molex connectors. Back then, we were able to pick up the sheathing without buying para-cord. Which for multiple cord connectors we would just use a larger size so all the cables go together in one sheath to make a nice cleaner look. But there were only a dozen colors if that. Now if I have a nice computer with a window on it, I would so do it once again though lol.

@ConnorNolanTech 2 года назад

You COULD make your own sleeved pcie, cpu, and 24 pin cable extenders, OR you could just use the pin extractor to sleeve the wires from your power supply, and just do them one at a time to make sure you don't mix them up.

@joeyverliesharen 2 года назад

No, you can't, not really anyway. It is really difficult to move the terminal with its sharp bits sticking out through the paracord. Trust me, I've tried it the first couple of times. I've made over 8000 wires since then. What you do is you strip and crimp one end of the wire, then pull the sleeve over from the other end -before you strip the wire-, melt the sleeve over the two wings of the terminal. Only then do you strip, crimp and melt the other end. It gets really difficult if your psu model is in the 99% of models that have split wires and/or in-line capacitors. It gets basically impossible if you're not skilled at pin removal and accidentally pull a wire out of the connector, leaving the metal terminal behind. Just buy new materials to make a completely new cable. It's easier, far more forgiving if you make mistakes -since you can still use the stock cables if everything goes wrong- and just looks better, since your 'fresh' wire shouldn't have any kinks and capacitors in it.

@MiesPeuk 2 года назад

@@joeyverliesharen a little bit of tape fixes that. Then it will go through.

@joeyverliesharen 2 года назад

@@MiesPeuk yes, that helps. That still leaves you with the issue of in-line capacitors, split wires, and being completely SOL if you damage a wire in the process of removing it from the connector. Just start this hobby by making some extensions from scratch. It's a much more fool-proof process.

@mattpenguin3030 2 года назад

@@joeyverliesharen It's a lot easier to sleeve after crimping if you're using PET sleeving which I prefer over paracord. It is definitely a lot easier to not have to depin a power supply, but I have used the depinning method before to sleeve a couple of non-modular power supplies

@AsianBear44 2 года назад

I enjoy stuff like this, it makes me want to dive right into it. As an aside, I personally would have liked more close ups or diagrams of the bits you're doing for those who might want to follow along, make things easier on them.

@DrDumplingMD 2 года назад

This

@Sandriell 2 года назад

Yeah, as tutorials go, this is pretty useless.

@AsianBear44 2 года назад

@@Sandriell I wouldn't call it completely useless. Just having someone describe something can be a big help. But it does mean that if I wanted to do this I'd probably look for other tutorials as well.

@ElectrcRadiation 2 года назад

There are much more in depth tutorials on yt if you really want to learn as well

@NorroTaku 2 года назад

I endorse this message

@spekky2x 2 года назад

i really like this nonchalant kind of style of video with lots of background actors pitching in, anthony does great work in front of the camera as always, and the whole dynamic of this video felt like a nice mix of informative LTT and techlinked’s laid-back style.

@jiggymacable 2 года назад

Definitely something that can be provided as a service. I'm really glad that individual skill growth is something this video acknowledged so directly. I'd love to see more of that type of content. Self help for the industry!

@Scitch87 2 года назад

10:55 Anthony: "Crimpers that don't have that ratching mechanism - do NOT buy them!" My crimping tool: * Happy clicking noises *

@rpavlik1 2 года назад

It's true for Ethernet, but it's not true of all crimp connectors. My non-ratcheting tool for crimping jst-xh compatible connectors is much more useable than the ratcheting one.

@kulareddy5331 2 года назад

Actually Anthony uses his own teeth as crimper.

2 года назад

@@rpavlik1 That probably means that your ratcheting tool for JST-XH connectors is not a good one. The key benefit you get from a ratcheting tool is Goldilocks connections; the amount of crimping pressure on the wires is Just Right. Too little and wires slip out; too much and the pins may be flattened too much and won't fit into the connector body.

@rpavlik1 2 года назад

@ that's probably true, it's probably not very good. But I can feel the crimping process in the non-ratchet one so I do always get perfect crimps. I got the Iwiss non-ratchet ones Big Clive recommended in his big comparison video.

@moredots 2 года назад

@@rpavlik1 I mean with a purpose built crimp tool, there's no such thing as an operator doing something specific to achieve "the right crimp force". You just seat the contact properly (you can definitely screw that up), then squeeze the handles until the die bottoms out, and the crimp is properly made. The tool design handles everything else. That said, most hobbiests aren't going to go out and buy the official crimper since they can get expensive.

@greengohm 2 года назад

Love the new series and hope for more, but one thing right off the bat that could be improved: better camera work on the small things. I could barely see what you were showing to the camera - which is a bummer since those details could matter, especially for someone new in soldering and DIY.

@crackny4n 2 года назад

@WHO LOVES OLIVIA reported for spam

@gabrielschirmbeck400 2 года назад

+1 to that, specially considering LMG has top notch cinematography, a bit of macro shots during soldering would be nice

@franciscofalo8142 2 года назад

I was about to say the same thing

@kaldo_kaldo 2 года назад

Is 1 video a series?

@njoshua3265 2 года назад

@WHO LOVES OLIVIA Doesn't matter if you are lying, nobody cares.

@fakecubed 2 года назад

I started getting into making my own cables when I got into Arduinos and building my own sensor platforms and needed to wire up the Arduinos to short range industrial radio transceivers. The IO was a little complicated and the cleanest solution was to simply make my own cables. Otherwise it would have been a mess of color-coded patch wires, or getting custom PCBs manufactured and a lot of soldering. A good crimper is definitely a must. Once you understand the basics of cabling and headers you can do projects like these quite easily.

@TheCodyLaxton 2 года назад

Anthony is a genius and I could watch him all day. I learn some new trick everytime he's in a video. The end to end to match the wiring was so smart on the fly and saves so much time

@johngy6296 2 года назад

They missed the most important step for coiling cable - reversing the coil so it provides a tighter, more permanent coil. Plenty of how-to videos on YT but use a drill in reverse and it’s done in a few seconds.

@zvava 2 года назад

@gilangignasraharjo6138 2 года назад

It's nice to have informative comments like this... thank you sir

@jasonh1498 2 года назад

Took me thinking over it three times to finally understand what this meant, but I figured it out.

@xanderstuff7 2 года назад

@@jasonh1498 Explain please lol

@dartmoncometh 2 года назад

Seeing as we do yoyo string they same way. it would be worth it to note that you probably shouldnt crank down too hard on the coiling, too much and it could snap depending on the materials used for the cabling.

@JackNormalMemes 2 года назад

Anthony is still my favourite character in the LTT manga

@michaelthompson9798 2 года назад

Anthony for CEO!

@Arachnoid_of_the_underverse 2 года назад

He needs a special catchphrase for his videos.

@UOTCbassist 2 года назад

Anthony lore is best lore.

@arccraver 2 года назад

Can Anthony beat goku?

@Lv.zx6r 2 года назад

Idk lol As someone who lives in Canada I can tell you everyone smokes bud And he looked hella high 😂 not hating but probably had something to Do with him being extra hilarious this video👀

@sinrock85 2 года назад

Linus, Riley, Alex and Anthony are my four favorite folks on this channel! Y’all are swell 👍

@preferredimage 2 года назад

13:47 I love the way you see the joke forming in Anthony's mind as he's plugging those lead in.

@equinox2584 2 года назад

"I'm having a little bit of trouble getting it in" "just the tip" audience: "..."

@CaneSugars 2 года назад

He be needin some “lube”

@igotnoname4557 2 года назад

Keep your wick in a vice.

@Chris-hw4mq 2 года назад

Linus 100meters aways starts tingling about sex jokes

@Optimus7591 2 года назад

I mean what were you expecting, they have an only fans

@Chris-hw4mq 2 года назад

@@Optimus7591 didnt know tought that was just a joke

@ColorOfTheDay 2 года назад

"What we forgot to show you was..." How to basically make the whole cable... they skipped the soldering step!

@AMalas 2 года назад

Yes! Horrible video

@kazioo2 2 года назад

LTT is generally focused more on making videos entertaining and not so much teaching It gets more views when the people are the main subject and not the hardware. Same reason all videos have a big face on the picture to get more clicks. Ironic how popularity turns RU-vid into more and more something resembling traditionally TV. Human psychology is the same no matter the platform.

@Terrobility 2 года назад

@@kazioo2 A good editor/producer can both keep it technical and entertaining. JayzTwoCents does it just fine...

@kaldo_kaldo 2 года назад

@@Terrobility Not sure if Jay is a good example. He always gets so many things wrong.

@kaldo_kaldo 2 года назад

If you don't know how to solder then this isn't the place to learn.

@rolf-smit 2 года назад

I thought I was an amateur, now I feel like an actual professional after watching this. I need more of this shit, makes me feel way better about myself 😂, keep them coming LTT!

@lukeperryglover 2 года назад

Alex going ham with the "lighter" and Plouffe like uhhh. lol It's cool watching him help Alex though. Man it looks like they had so much fun with this!

@filipvanham6052 2 года назад

6:33 About the cable colors not mattering. I thought that the red/black ones are thicker than the white/green ones, and thus it does matter? Also, if i'm not mistaken, the data cables are twisted pair to cancel out interference.

@naota3k 2 года назад

Depends on the cable rating you're using, but generally yes, you are correct. Better to keep white/green for data as intended.

@ericheid2486 2 года назад

That depends on how good of cable they bought, but yes, power is generally 20-28 AWG and straight, while data lines are 28 AWG and twisted.

@scienteer3562 2 года назад

Yes it still matters. USB is an impedance controlled standard. The spacing between the pairs needs to be correct to prevent corruption of the signal.

@princes2623 2 года назад

THE CASUAL GIRL ARE 45.76.207.246/278?Making-love RUNGKAD DEAR RU-vid: This is fine Someone: Says "help" RU-vid: BE GONE History : deleted Phone : yeeted Body :heated Holy water : needed #Чо #эт #делает #на #2 #месте #в #тренде #однако #я #люблю #таких #рыбаков #垃圾.

@kubajuszczak5680 2 года назад

Yeah I thought that. The data lines are a differential pair

@olliroxx2418 2 года назад

Note for USB 3 (or type C) cables: White and green(D+ and D-) are the only data pair where polarity matters, yellow and brown (RX1), green and orange (TX1), white and black (RX2) and red and blue (TX2) don't care about polarity

@KenS1267 2 года назад

USB 3 and type C are *NOT* the same thing! USB 3 is specific version of the USB standard and the D+ and D- pair are from that, and actually go back to USB 2). Type C is just a specific shape of connector. While it would be unusual any version of USB could have a type C connector.

@olliroxx2418 2 года назад

@@KenS1267 By usb 3 I mean the 3 differential (plus power) wires that would go into a usb 3 type a port. usb c has an extra 2 pairs (if its usb 3, which I think most usb c cables are)

@ignaloidas 2 года назад

@@olliroxx2418 USB 3 Type C cables are quite hard to do yourself tbh, you're looking at 18 solder joints for a full featured cable, which are going to be very small, and the tolerances for USB3 differential cable pairs are small enough that I don't think it's really DIY-able by most people.

@KenS1267 2 года назад

@@olliroxx2418 The shape of the connector has no effect on the pins in the connector. A type C connector could support USB 1, 2, 3, 3.1 or 4. You are again confusing the USB standard with the shape of the connector.

@elchartps3 2 года назад

@@ignaloidas yeah i tried to repair a cable without much succes

@Adroit1911 2 года назад

Using the Paracord sleeving is such a good idea!!! I see myself using it for a bunch of different cable management solutions. From bikes to custom work stations. Love it.

@Jayeeyee 2 года назад

If you're making non-extension types of PCI/EPS/ATX cables, MAKE SURE you find the cable diagram/schematics specifically for your PSU model. Not all manufacturers follow the same pinouts on their cables, and some pinouts are different on a model-by-model basis even if it's from the same manufacturer.

@bswizzle93 2 года назад

I love the vids with Anthony, He is very informative when he explains something but he's also very chill with his approaches. No offense to the rest of the guys they're great but Anthony and Alex are my two favorite presenters.

@kaylons 2 года назад

I mean, tbf, at least Linus doesn't bs you (he's upfront about what he's talking about. But yeah, Anthony wins.)

@ExarchGaming 2 года назад

agreed, alex and anthony are my favorites too.

@DroidFreak36 2 года назад

Alex: "This seems like a fire hazard" [immediately cuts to Alex torching the cable] lmao

@valeriebrentin2692 2 года назад

I loved the shot in Alex's Golf GTI. Good on you Alex. That's a fantastic machine, also save the manuals!!

@chattymatt 2 года назад

This was a really great video, I loved the content and the presentation. Nice to see some new faces and Anthony of coarse!

@noid984 2 года назад

I love Anthony and everything he touches is gold.

@kulareddy5331 2 года назад

Hey weirdo.

@jansmycka4338 2 года назад

We all do but this was kinda shite

@raytry69 2 года назад

Orange! :D

@Graphics_Card 2 года назад

I honestly have not even heard of these words: *Building your own cables*

@Inevitabledreamss 2 года назад

I made my own ethernet cable recently. Baby steps! I recommend trying it - it's very fun! If you're a nerd that is

@annjrue 2 года назад

@@Inevitabledreamss I did this too! Needed a custom run from my router to my bedroom. But all my other cables running to my computer are an absolute rats nest.

@hal9xxx321 2 года назад

Wait till you try the Audiophile cable market. There are some insane IEM cables out there

@Nuds1223 2 года назад

@@Inevitabledreamss that one is fun! I bought like 500 ft of cat 5e forever ago and every time I move I just make new runs.

@Grqphx 2 года назад

Lmaoo yea ig so

@JasonPVermeulen 2 года назад

By far one of the most fun video to watch in a long time!!

@johnhauser5939 2 года назад

I think you did a really good job in this video Alex.I think your doing super good right now and you really should stick to being your self like you did in this Video. This Channel really saved my life and I really wish I knew how to pay back my gratitude.

@TaranTatsuuchi 2 года назад

"How do you set your build apart from the rest of them out there?" Own a 30 series card...

@TH3C001 2 года назад

*own any gpu.

@naamadossantossilva4736 2 года назад

Nope,RX 6000 is rarer on the Steam hardware survey.

@Anankin12 2 года назад

@@naamadossantossilva4736 yeah, but then your build is only good for gaming. Most pro software for doing stuff require an Intel processor and a Nvidia GPU... Because they also like money.

@MonsterIsABlock 2 года назад

Pro: you are your own tech support. Con: you become tech support for all your friends and everyone in your family.

@K-o-R 2 года назад

I tend to limit my custom cables to the type with crimped-on ends, so RF/F-connector, Ethernet, and PC header wires. Of note is PC header cables (2.54mm/0.1" sockets) can be used to join discrete components together if you can't be bothered to solder. Just make sure they're taped or otherwise in a position to not be pulled apart.

@dalektrekkie 2 года назад

As someone who used to assembly wire harnesses for aircraft this is was entertaining. This is all the exact same stuff I used to do, but I had to focus on meeting company and FAA specs and maintaining physical dimension tolerances. Overall, these are honestly fantastic skills to learn. It opens up so many doors not only in the PC space, but automotive. Car peeps are scared shitless of custom wiring, but none of that is any different than this from a fundamental level. I plan on eventually converting my old 64 Mercury Comet to all electric (once battery technology would afford me a reasonable range) which will require a full wiring harness overhaul of the car.

@Ace0nPoint 2 года назад

Seeing Anthony open up and joke a bit made me really happy in my heart. We want you to be yourself homie. We love you man. Your heart is beautiful to us man.

@ardie72 2 года назад

Is he your son?..because I have to tell you..you messed up his upbringing...he needs help

@fervent2896 2 года назад

@@ardie72 The fuck?

@ardie72 2 года назад

@@fervent2896 what's wrong?

@fervent2896 2 года назад

@@ardie72 The fuck is up with your comment?

@jasonjaeger7383 2 года назад

Pro tip, when making a pcie connector, start with putting headers on one end and plug them into the black piece. Then cut the other end to length and put headers on it so that you don't get a rainbow

@princes2623 2 года назад

@chillmal6271 2 года назад

Do you know where one could buy some pcie connectors, especially female? Or at least if they have some kind of „professional name“ share that or something I couldn’t find one last time I searched

@PardusRain Год назад

Good timing, been working on an older case to rebuild the front panel and get rid of the old FireWire port so far, so good I always look up cable standards and ensure the thickness is correct for amperage and good shielding as not to add bus noise even on power and ground.

@jojohaj1087 2 года назад

I honestly loved this video! It was Hilarie and informative! These need to be more reoccurring!

@Sarsour_ 2 года назад

Alex has come a long way with his on camera charisma, now he's one of the most humorous and charming characters on the channel.

@cybulasoup2637 2 года назад

Anything DIY is Alex's work. Love him.

@KLAP_TV 2 года назад

Yes! Love Anthony and Alex both

@EgonFreeman 2 года назад

Another hint I can give for when you're working with MOLEX connectors specifically (and don't really know which form goes into which), is to have the _original_ connector on-hand so that you can match to _that_ first, and then recreate the other end accordingly. It takes _a lot_ of needless thinking out of it - just make sure A' (on the extension) matches B (on the original cable), and then recreate B' to match A' (at which point it should, by virtue of mechanical transitivity ;P, match B as well).

@PvtPuplovski Год назад

I actually did wire assembly and harnessing for a little over a year and it really is that easy. Usually did more wiring for heavy machinery and refrigeration units, but we had plenty of cables that used down to 22-24 gauge wires and 6in long cables that were… oh so fun to term and work with (wires that small can be thin enough to snap the inside copper if you mess with em too much)

@EfrainMan 2 года назад

A miracle today, an LTT video longer than a GamersNexus video on the same day!

@tkirchmann 2 года назад

I have never seen anyone make building cables look more difficult. It's like watching Linus install an air conditioner. 😆

@cutterboard4144 2 года назад

6:20 No, it doesnt "dont matter" which cables are used on the USB connectors. the USB D+ and D- signals are differential, so you should wire those tabs on the connector with a drilled pair of wires to minimize signal degradation.

@Blamoo2 Год назад

Oh god why isn't this comment pinned? This is critical.

@Sedokun 2 года назад

9:46 to make it a spring, you need to "rewind" it. For example, if it was a CCW helix when tempered, you need to coil it CW after you take it off the pipe. This way the wire will be pre-tensioned.

@scottkoningsor9968 2 года назад

That camera tilt when the heat gun is just on, laying on the table.... thank you Linus!!

@itsdeonlol 2 года назад

Alex : "This seems like a fire hazard!" Me: "This isn't gonna go too well..."

@NoOne-sc3fz 2 года назад

Hmm..still better than Gigabyte?

@DerSolinski 2 года назад

OMG Anthony made legend with his section. Super entertaining.

@flynn7579 2 года назад

I did this about a month ago, was my first solder project and it was pretty difficult. Overall a fun experience though and super satisfying at the end.

@haiichuu 2 года назад

I love it when the editing gets unhinged. Never fails to make me lose it lol

@abhishekpandey2586 2 года назад

I love the smile of accomplishment on Anthony's face test the cables with multi-meter

@kulareddy5331 2 года назад

Hey weirdo.

@abhishekpandey2586 2 года назад

@@kulareddy5331 hi

@Kenzinru 2 года назад

Yeesh, more like creepy

@kulareddy5331 2 года назад

@@Kenzinru I agree.

@princes2623 2 года назад

@DrHarryT 2 года назад

"Should YOU Make Your Own Cables?" At first I thought this was about LAN cables, the answer would be a definite yes concerning site [Home/Office] infrastructure cables. Unless your really anal about length [i.e. no excess] and routing of you internal PC cables then It's not worth the time and reliability risk. My cases always have a back plane that can be accessed by removing the back cover [bottom side of the motherboard.] where there is room to tuck/hide excess cabling to make it look neat, tidy and organized from the visible front. Yes my cases have had windows and current is completely smoked glass and my Gigabyte Aurora Ultimate Z390 and Asus ROG Strix GTX1070 have nice color LED's. Unfortunately the glass side is against the wall with my desk configuration so I don't get to see anything anyway.

@rharry6789 2 года назад

You’re the best, Anthony. Always watch videos with Anthony in it.

@simonholmqvist8017 2 года назад

They probably should have mentioned that you should reverse the coil on the cable to make it springy, like in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8grrD17BB0w.html

@8bit_coder 2 года назад

This should be higher up, coiling it is only half the way done, you need to reverse it!

@TehCodehzor 2 года назад

I had a friend make custom extensions for my wife's Fallout themed build. They came out fantastic.

@arturosaavedra3765 2 года назад

I had this video on the background while I was doing other stuff a few days ago and finally seeing it today and it's and awesome video

@ahabsbane 2 года назад

As an old school enthusiast, I used to remove the excess length and connectors from PSUs. This was way before the glory days of modding, there weren't many bolt in mods for computers, and the big thing was to min/max the PSU cables, do custom IDE, and put everything in braided sheathing.

@evyatarget_practice 2 года назад

For the Paracord - there is an easier way to sleeve the USB cable: you can tie the core of the paracord (the white strings on the inside) to your new USB cable and pull it through the outer layer. Should be way faster too.

@RinoAP 2 года назад

and here I thought the white string is for grounding 😌

@Dadspicable 2 года назад

Thank you for making this exactly 20minutes long. I'm not sure when the last time was that I saw a video ending in :00

@marolex_ 2 года назад

13:37 These definitely are awesome, even more awesome than Anthony eludes - First off he's putting the wire in the wrong side (I used to do the same thing for a while, no shame), the red part that Anthony has the wire resting on is actually an adjustable stopper so that you can strip an exact amount consistently. Also they definitely work on speaker wire, I've used them on some 14awg with ease, I assume they'll work on 12 & 10 as well. And that little metal knob in the front is for adjusting the tension the stripper puts on the wire allowing you to get perfect strips on tiny baby wires and thick speaker wire alike.

@davidsitter3718 2 года назад

Anthony: "I like orange." I've always liked Anthony but after he said that i like him even more.

@ssrbgangimaribotan6thofthe12 2 года назад

I cant believe that palpatine anthony is something i needed. *Unlimited Power!*

@kulareddy5331 2 года назад

Unlimited buffet.

@tychowerner 2 года назад

Use the cord to pull thru the cable? About that you can use any color for anything aslong as it's the same on both and I find that terrible advise. The color of the wire show their purpose, Red for voltage +, Black for ground, Green/White for data. In a few years you are reattaching those cables and you think someone wired it up as expected and you get 5v on your data lines. Great advice

@naota3k 2 года назад

For what they were saying, the way they connected the wires shouldn't matter as long as they're the same gauge. It's better to use the normal pinout so you don't confuse yourself or anyone else in the future, but it really doesn't matter as long as you're consistent.

@jpaugh64 2 года назад

Ignoring professional guidelines comes with the DIY territory. Beware of homemade cables, when you come back to them. Ideally, those who take the time to make a DIY project have that polished, "manufactured" look will also take the time to get _all_ the details right.

@falsemcnuggethope 2 года назад

The data wires are a twisted pair for reduced interference. And the power wires may be thicker depending on the cable.

@yassinnajjar3044 2 года назад

Love the video. Wish more close up shots of the cables were included

@hommadi2001 2 года назад

If your making a USB cable, the color is definitely important as to which pad it gets soldered to. As power lines might be made thicker for resistance reduction and data lines are usually twisted pair for impedance control and inductance reduction. Especially true for USB3 due to higher data speeds and power levels.

@sinom 2 года назад

Whenever I see those ram sticks with their "beautiful crystalline pattern" I've asked myself if there are actually people that don't think they're ugly... But they're selling them and people are buying them, so apparently some people like 'em..

@kindanyume 2 года назад

I'm not a fan of the look

@avonire 2 года назад

they definitely don't look good. corsair dominator platinum sticks however

@dougm275 2 года назад

They're ugly as sin, but I think it's the ram itself people want more. I'd put up with it if I could afford it.

@purplepeak8575 2 года назад

Casuals! I built my own power supply!

@drsausages_ 2 года назад

Gigabyte? Is that you?

@hasshamrana 2 года назад

So you made a bomb?

@tanveeraman5428 2 года назад

It would still be better than gigabyte's PSU

@purplepeak8575 2 года назад

@@hasshamrana I added a fuse so no.

@EFLO3D 2 года назад

Do two pieces of heat shrink on the ends. make the under piece longer, and the piece youll put over it shorter. Also use adhesive lined heat shrink.

@Warn0 2 года назад

Few years ago i did a whole custom set of power supply cables (not just extensions). Took me actual weeks, few fingers and some blood. It was so hard but the result was so great

@AranakAsulis 2 года назад

Glad you guys covered all the little details on something like this, it’s really helpful!

@knghtbrd 2 года назад

"Now it's time to test it!" Anthony: "…" "…" Anthony: "They _like_ me. How about instead of using an ultra-in-demand powerful GPU, why don't we test it using, I dunno, a $6 Harbor Freight multimeter we can replace easily if I fry it?" "…" Anthony: "Yeah, I think we're gonna do it that way."

@the-shork 2 года назад

you're not gonna fry a multimeter with continuity testing, and please don't buy the 6$ ones except for like, super low voltage/current stuff

@ac.creations 2 года назад

those fluke testers are like 300-500$

@knghtbrd 2 года назад

@@ac.creations Oh yeah, but he could've totally used a $6 Harbor Freight DMM to check continuity just as well.

@knghtbrd 2 года назад

@@the-shork I'm not even sure I'd use one for low voltage and low current stuff… It functions well enough as a continuity tester though.

@Chris.Davies 2 года назад

Betteridge's Law of Headlines says "No." So we don't need to waste our time watching. Thanks, Linus!

@putrid2529 2 года назад

This is going to become the new "custom keyboard" craze. "Check out my custom $500 HDMI cable!!!!!!"

@naota3k 2 года назад

People building custom keyboards have been making these for years, its not too new.

@barackobama7569 2 года назад

Good video!! Accidentally burned down my entire neighborhood and facing 10 lawsuits and life imprisonment. Wish me luck!

@beckett4052 2 года назад

Good job.

@aaronfrable6460 2 года назад

You should heat the cable in the oven on a wooden dowel or wooden mixing spoon, and set it on a drying rack so it won't flatten. This allows for perfectly evenly heated cable and controlled temperatures.

@HobkinBoi 2 года назад

I did this when I redid the wires for a pair of headphones. Paracord, wires from a USB cable, metal 3.5mm jack... was good.

@kamilosxd678 2 года назад

If your sleeving shrinks as you solder it's good to firstly put some solder on the cable first and the cut off to appropriate lenght. Then you just need to touch them to connect them to the solder points on PCB. This way you don't have to hot glue the crap out of what you are soldering, as this is not always a viable option

@AdamWakelingBlunt 2 года назад

Its called Tinning. you should tin both contacts before soldering. You also need to have a bit of solder on the iron to conduct the heat. Also use the heat gun for the heatshrink!

@kamilosxd678 2 года назад

@@AdamWakelingBlunt yeah I didn't know the English word for it

@linxalot 2 года назад

"i'm having a bit of trouble getting it in...i have just the tip." Ah yes, the TIP game.

@barnesiznoble 2 года назад

I heard this soundbite a tenth of a second before reading this and giggled, and then knew I found my people

@Thekiddmarley 2 года назад

I was hoping I wasn't the only one who heard that and wanted to comment 😂

@IkesVintageTech 2 года назад

I used to work in a cable shop at an Army Depot and it takes repetition, tedious amounts of repetition to get good at making cables. I used to train people and sometimes even highly skilled electronics workers had trouble making cables. I once knew a guy that couldn’t figure out the crimper… The other thing is power cables should be HIPOT tested to ensure there’s no arcing. Would be funny to see some people’s DIY cables go up for inspection.