SHOULD you SUBDIVIDE the mesh? - HARD SURFACE dilemma in Blender.

Подписаться 89 тыс.

Просмотров 46 тыс.

50% 1

►► Enroll in the most popular (and free) hard surface modeling course - www.blenderbros.com/jumpstart
►► The Hard Surface Academy - www.blenderbros.com/academy
-----------------------------------------------------------------------------------------------------------------------------
➤MaterialWorks Blender addon (easiest way to texture in Blender) - www.blenderbros.com/materialw...
➤ Our Hard Surface Modeling Products: www.blenderbros.com/store
---------------------------------------------------------------------------------------------------------------------------------------------
MY FAVORITE BLENDER ADDONS:
⚙️HARDOPS and BOXCUTTER
gumroad.com/a/95646835
www.blendermarket.com/creator...
🔨 Decal/Mesh Machine/Machin3 Tools:
www.blendermarket.com/creator...
⛮ KITOPS 2/ Design Magic / Eevee + Cycles Materials System
gumroad.com/a/779940979
blendermarket.com/creators/al...
🔌Cablerator
gumroad.com/a/877982835
www.blendermarket.com/product...
💾Power Save / Power Link / Power Backup
gumroad.com/a/1073542259
www.blendermarket.com/creator...
🧘‍♂️ Zen UV / ZenBBQ
gumroad.com/a/10482803
www.blendermarket.com/product...
🐝UV Packmaster 3
gumroad.com/a/1027609715
blendermarket.com/creators/gl...
☝️Mech Squad Collection and more
gumroad.com/a/634688627
️‍🔥Skribe - Screencast key program
gumroad.com/a/483153107/lcdne
**Some addons listed above may contain affiliate links, giving me a small commission from any sales made. I only promote addons that I use personally.
-----------------------------------------------------------------------------------------------------------------------------
BLENDER BROS LINKS & SOCIALS:
💻 Website - www.blenderbros.com/
🏪 Gumroad - gumroad.com/theblenderbros
📡Blender Market - blendermarket.com/creators/bl...
☎️ Discord - / discord
🖼️ Instagram - / blenderbros3d
🎨 Artstation - www.artstation.com/blenderbros
📣FB Group - / blenderhardsurface
CONTACT:
📱 Inquiries/questions - info@blenderbros.com
**Some addons listed above may contain affiliate links, giving me a small commission from any sales made. I only promote addons that I use personally.
🧩My personal links (stores / websites / portfolios)
➤linktr.ee/ryuurui

Опубликовано:

16 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 154

@bunnyvoid 4 года назад

"pick your battles the smart way" i like that advise, thanks!

@PonteRyuurui 4 года назад

You bet!

@chrisvkr8200 2 года назад

The whole idea behind Subdivision Surface modifier is to not apply it. Then you can control the mesh with a relatively low amount of control points while affecting many. It is difficult to get a hang of and slow, but definitely good for many designs that you cannot make with just booleans and bevels

@PonteRyuurui 2 года назад

the whole idea is to use tools the way you need them to get the job done mate

@ilyaalexandrovich917 4 года назад

You are the god of all Blender Hard Surface artists

@PonteRyuurui 4 года назад

I would definitely not go that far lol but thanks, glad you enjoy the vids!

@RobertWallace 4 года назад

Thank you for this. Love your out of the box take on modeling. Your workflow fits so well with the way I think.

@PonteRyuurui 4 года назад

Awesome, thank you!

@lebronzejames9738 Год назад

So many gems in this you talked about quad vs ngon subd or not and even how to fix things along the way you also did a great job showing the pros cons of each and what they're best at perfect video thanks!

@josephburgan3D 4 года назад

You're savage, I love your videos. Thanks for putting an end to crappy misconceptions and absolutely meaningless beliefs that have no foundation within the 3D workflow. You're a gem in the Blender community.

@PonteRyuurui 4 года назад

ah cheers mate, I really appreciate it!

@SonictheHedgehogInRealLife 2 года назад

Pick your battles do what works regardless of these beliefs

@MarquisDeSang Год назад

Just use MOI3D or Plasticity and move on with your life.

@nevs30 4 года назад

This seriously made a lot of sense! Thank you so much man! \m/

@PonteRyuurui 4 года назад

Glad to help!

@cliffmorgan9407 3 года назад

I love how digestible this was.. love this channel

@PonteRyuurui 3 года назад

cheers Cliff!

@switchman9173 4 года назад

Always picking the right topics.

@PonteRyuurui 4 года назад

glad it hit the right spot!

@del7571 2 года назад

Thank you so much! I was in need of such advice

@PonteRyuurui 2 года назад

Glad it was helpful!

@baptm727 2 года назад

Very interesting and insightful as a beginner thank you

@NickyDekker89 3 года назад

Very informative video, thanks!

@PonteRyuurui 3 года назад

Glad you enjoyed it!

@evnmorfun Год назад

The 'slang' you use in your videos really add to them ! I'm a big fan

@acadgatsu 3 года назад

"...Ask Gleb, he has a video on this. I was watching it. I was dying inside, slowly." LOL. I subbed and bought one of your tutorials on blendermarket. Thank you!

@PonteRyuurui 3 года назад

haha, cheers man!

@Tovi7 3 года назад

Subscribed for the no bs attitude. Thanks man, I thought I was doing something wrong, but never considered just not using subsurf to avoid headaches. This makes sense now.

@PonteRyuurui 3 года назад

cheers man!

@Marcusstratus 3 года назад

Whoa. Lotsa tricks in this one. Cheers

@PonteRyuurui 3 года назад

glad it was helpful

@vrmsali Год назад

@GrantAbbitt tutorials got me going in blender and now you are going to get me in hard surface. Because of your videos i will be buying my first paid add-on hardops & box cutter bundle😬. Your videos are just too good. Thanks

@PonteRyuurui Год назад

welcome to the dark side of the cube!

@antonvandenberg2128 3 года назад

thank you ,its what i ve been thinking if you smart handle your model you can do anything, thnx Ryu

@PonteRyuurui 3 года назад

Yup! cheers, mate!

@dailey3drevolve 2 года назад

Awesome videos, and truly amazing 3D art. Thanks for sharing.

@PonteRyuurui 2 года назад

cheers mate

@AJ-xx5ik 3 года назад

As someone slowly transitioning from NURBS/CAD software like Solidworks, Rhino, Alias.... this helps a lot. Many modeling tutorials stress quad-mesh topology for sub-D, so I've been wondering how you hardsurfacing pros achieve that highly detailed mech-look that is similar to NURBS-based booleans. This video changed the way I think about poly modeling!! I love this approach! Need to get me a copy of hardops + meshmachine.

@PonteRyuurui 3 года назад

Glad to hear it, mate, we have too much misinfo on quads. You should also check my tut on quadremesher and offset cut with mesh machine, deus ex vid on machine tools, and look up the upcoming hyper cursor from mmachin3 on his channel. This is gonna be as close to nurbs as you can get with poly modelling.

@BobJones-cd9mt 11 месяцев назад

haha you sound like my first Blender teacher. He did not like subD either. He used lattice a lot. Amazing what you can do with the lattice. Subbed.

@PonteRyuurui 11 месяцев назад

cheers mate

@nelyrions1838 2 года назад

Generally i don't advice to use bevel. Working with edge loops is superior. That way you guarantee 100% quads. And fully re-editable beside the actual extrusions and insets.

@PonteRyuurui 2 года назад

i work with whatever is faster mate and gets the job done, I am not gonna spend 7h messing with edge loops for a folio render. If i work in pure subd on a vfx project, then yes loops are the way to go, most of the time, unless creases are requested. Other than that speed is the essence.

@niemanickurwa Год назад

@@PonteRyuurui A portfolio piece should showcase your skill, not your ability to quickly make a mesh that is unusable in a pipeline. I appreciate you giving the lattice some love though.

@movescalerotate6715 3 года назад

"It's bollocks yeah?". Subbed.

@PonteRyuurui 3 года назад

lol, cheers

@schizoscope8703 4 месяца назад

Key for success is right tools. Hardops its perfect for hard surfaces, but for making some smooth geometry, like an sport car as exemple, subdive is way more handy.

@techboy2863 4 года назад

thank you sir for sharing ideas :) god bless :)

@PonteRyuurui 4 года назад

You are very welcome

@legato3067 4 года назад

thx really learn alot :).

@PonteRyuurui 4 года назад

Awesome!

@OGPatriot03 3 года назад

So you can use the bevel modifier and set the limit method to weight instead of something like angle and then each edge can have a different weight so any edge could have a different bevel offset with just a single bevel modifier, something you said couldn't really be done at 7:30 but I could do it very quickly and efficiently. You can use this in conjunction with sub division to essentially fortify the edges that that you wouldn't want to be softened so that the mesh can maintain it's shape without you having to add extra loop cuts.

@PonteRyuurui 3 года назад

technically you could but thats a lot of manual labour and fiddling.

@ovaldreamx4397 3 года назад

Ok, so this has been a life saver for me. As a begginer, doing a boxy thing they told me to use subd, ended up with a mess and spent hours manually fixing the topology vert by vert. Ofc I got frustrated and bored after 5 hours without any real advancement. Now seeing this video, I could've used bevels and got away with it! Clean, easy to handle and relatively low poly mesh!! Idk if you're gonna read this but thanks man!! Subbing rn even though I don't have any of the payware addons yet haha

@PonteRyuurui 3 года назад

sweet, glad it was helpful, i d start with hopscutter bundle, that thing is off the hook

@r1yuj1n 3 года назад

Very nice video! I'm about to buy Hardops/Meshmachine and more addons, these really look fantastic! Just one question : if you were to optimise the polycount on your Phoenix, say, to make it a game asset (I assume your mesh has way too much geometry for a game asset? Couldn't see the amount of tris you got), would you do a full retopology by hand so that you can bake your already high poly mesh onto the low poly? I mean, somewhat like you would retopo manually something you just sculpted.

@PonteRyuurui 3 года назад

you could do it in many ways, retopo is one, you could also try clean mesh with hard ops, creating low poly model is another

@Eiskrieg_only 2 года назад

“Control it. Good luck”. LOL, great video.

@massmedia5462 2 года назад

"We are trying to hunt them down and eventually we will get them all" LMAO😂

@PonteRyuurui 2 года назад

it's a process

@josephvanwyk2088 8 месяцев назад

As a Amateur level blender artist. I love SubD, but man it can give you butt ugly topology. Which often results in double work cleaning it up. But at the same time, gives you the exact shapes and curvatures.

@Stuff-3D-creations 3 года назад

Hello!! Fantastic explanation. What do you use to perform boolean operations?

@PonteRyuurui 3 года назад

Boxcutter and Hardops gumroad.com/a/95646835

@harrysanders818 2 года назад

Same bears true for animation as well. Not only hard surf. If you wanna support folds standing out on the silhouette of the jeans of your character, you can happily throw some tris in there, or even ngons, as long as you check how it looks triangulated before export. Main thing is to have a good edge flow in deforming areas, face, elbows, knees, ankles... the rest you can achieve very good looking low polycount models by throwing the quads only doctrin out of window. And nothing will replace early deformation tests anyways. Jus cause you build an organic model out of quads only does not guarantee it deforms well for what its supposed to do. Way too complex for a rigid checklist approach. People are hiding behind this quads only bs forever. So glad more and more professionals clearing this up.

@PonteRyuurui 2 года назад

Exactly, lots of folks are stuck in the 1800s. Especially noticeable in schools, where students are being taught the same crap because teachers are too lazy to actually poke their heads up and see what has changed.

@HarvestrX Год назад

Quads are just easier to work with in packages like Maya, where you can't add an edge loop if you have a triangle among your quads. Many edits in high deformation areas are easier with quads as well. Why this has to turn into a heated debate is beyond me. Sometimes tris are ok, other times not so much. There are a lot of situations where they should be avoided while other times there is nothing wrong with having them.

@darrenberkey7017 2 года назад

0:44 - "Oooh, scary." I seriously had to pause the video I LOL'd so much.

@PonteRyuurui 2 года назад

hehe

@I_am_Spartacus 4 года назад

So... for anything to do with hard surface modelling, you say stay away from from Sub D (which makes sense to me after doing a lot of yours and Josh's videos), but what about taking some of these models into film, would you say Sub D at the end when you have your final model and what more high res control i.e with textures etc (just a guess)

@PonteRyuurui 4 года назад

i did not say i stay away from sub d, i said i stay away from it if i dont need it. so there is your answer.

@gorgeousnoxy481 Год назад

Where the heck have I come in my blender journey to where I'm listening for a guy talk for 20 minutes about sub d vs hard surface modeling? 😵‍💫

@DavidAllen_0 4 года назад

Very useful! Personally, I find working with subdiv difficult for hardsurface, but if I do (that 1% of the time), I apply strong creases and vertex weights (I hope that Blender implements Edge Weights like Modo has!) for more control Glad this is out of the way though. I've been taught early on that subdiv will be my most commonly used modifier. I never guessed that it instead would be Mirror, Bevel, Weld, Decimate and Boolean.. Oh and Array, and Screw and Solidify.. Everything *BUT* Subdivision. It's honestly one of my least used.

@PonteRyuurui 4 года назад

Cheers! Well, you can use edge weight in blender, if you are using hardops it is even easier.

@chrisliddiard725 Год назад

Sub Division was useful back in the day when you had to save on polygones. These we have such powerful systems that you don't really have to use subdivision models. I didn't know Blender did B-splines , which i last saw on Rhino. So many options on this program, and its free. Up until this now i thought 'hard surface modeling' was more a process or a technique which you could apply to any underlying mesh, but it seems better suited to mesh modeling, with the addition those tool sets like bevels etc. The thing to look at would be controlled transformation tools. so you can add natural flowing curves to those hard surfaces. I have the feeling much of what we call design is still in part, constrained by the tools we use, or the ways we use those tools.

@HarvestrX Год назад

You still have to save on polygons. Games have limits on polygon counts, the limit is just very high. Its all about how much time you want to wait for quality. Games require decent framerates, and prerendered animations need to be rendered in a decent amount of time. So, its all about the lowest polycount that is acceptable such that the render times and final quality are good.

@criticalwokeracisttheory4645 Год назад

Some incredible statements. 'Sub Division was useful back in the day' - So the pros at Marvel and ILM are stuck in the past? Stuck in the 80s? LOL. Pixar has a dedicated Sub D algorithm and yes when working in the industry you WILL need clean quad topology. One of the reasons why clean topology and quads are so important is how the model interacts with light and textures etc. Maybe for a 3d sketch but even then you will need to retopo - QuadDraw for example to retopo. I want to see a tutorial here on modeling a car - something that students work on in HS modeling .

@philmehrart Год назад

"Trying to hunt them down" 😂 😂

@HEWfunkingKNEWit 2 года назад

already subd

@MK-yj7pn 2 года назад

This solves the question for me. I used to think that I need to do subd coz almost all the tutorials are doing it. I don't even need it half the time. Thanks.

@PonteRyuurui 2 года назад

ya those tuts are full of shaite, the base line is - use the topology / mehtods that gets the job done.

@mitri5389 3 года назад

I am very good at sub d modeling but this hard surface boolean stuff looks like it makes other processes difficult such as creating low poly meshes for texturing with sub d i can use my base mesh to make a HP model and LP with minimal work without having to retopologies a mesh for instance. can you elaborate on what this is good at? is it only for creating a block out or just for cgi work?

@PonteRyuurui 3 года назад

time you waste on subd you save on bool workflow, also who said you cant texture it, if it doest bend you are fine in hs. subd is outdated mindset mate, unless you work in movie industry, specific pipeline, or you need quads for some other reason, also if you REALLY need quads, just remesh stuff with quadremesher

@edblackmaneven362 Год назад

Good discussion. Less is more.

@OnkAnCa64 4 года назад

Hi Ryuu, if you have a bit of time to make a new tut about Array V2, I'm completely screwed with it to create a radial array, ST1 can be used I know but not really a fan of it, currently I use 'meshtools/radial array' function it's the older way but at least it's working easily, thanks in advance on mate.

@PonteRyuurui 4 года назад

sure man, i ll have to look into it, you can always use radial array from hops tool top bar

@MaximumAbility 4 года назад

16:45 but for example if I want like in this situation to have this hole intersected with huge bevel to stay in place without moving, how I have to clean this?

@PonteRyuurui 4 года назад

if you need massive overlapping bevels then you would need to reshape that mesh or use sculpting and retopo.

@RM_3D 3 года назад

I've always done subD since i started 3d using Maya. now im trying to learn blender I never put enough edges when i bevel as i@m too used to subD, cuz i think it'll just get smoothed out later.

@PonteRyuurui 3 года назад

it depends on what effect you are going for

@Benjamin-vx2ot 2 года назад

totally feel the same! :D

@cottontips7419 Год назад

which ever best fits your work flow and allows you to animate it so it deforms correctly if you intend to have your hard surface bend and get damaged etc. I just wish there was something to help with organic surfaces, I spend so much time point pulling to get everything just perfect. Organic objects should have imperfections, but that does not mean the mesh should have any imperfections. 90% of my time spent point pulling is just spinning and turning my object and 10% is moving the verts.

@PonteRyuurui Год назад

quad remesher

@niemanickurwa Год назад

I would argue that the point in using subd is it is animation and sculpt ready, 2 of the most common pipeline aspects of 3D. That static piece you made that you think didn't matter, in a production pipeline has now be changed at the whim of production, and will need to be animated for example. Learning to use subd is considerably harder than what you are doing, so I know for a fact I could learn how to model your way in a couple minutes (and it's great for visualizations, rough drafts), but if someone learns the easy way, can they learn how to model subd in a couple of minutes? It would take weeks or months. Learn the hard way first, it makes everything easy by comparison.

@BobJones-cd9mt 11 месяцев назад

Only the parts of the mesh that will be doing 90% of the animation or movement need more topology. Elbows, knees, mouth eyes etc etc for pinching and stretching issues. The rest does not. Sculping of course needs more for detail but thats not the model that will be in game etc. Its just for the detail baking to the low poly. Its useless anywhere else except a render. SubD adds to everything and is a lazy go to for too many people.

@niemanickurwa 11 месяцев назад

@@BobJones-cd9mt It sounds to me like you don't actually know how to use subD properly. It's certainly not a "lazy go to" (in a video about Hardops and Boxcutter) lol But well, good luck getting a decent job in VFX, animation, advertising, movies and TV with that attitude.

@BobJones-cd9mt 11 месяцев назад

@@niemanickurwa My attitude has got me self employed with my own business. Before that Ive been hired for animation over the last 14 years for combat 3D meter systems. Back then lag was a big issue in the gaming world so we learnt to build things as simple as possible while looking the best possible. So my background is low detail Prim models high detail textures. Im currently involved in another gaming combat system in Virtual 3D simulator (after being out of it completely for the last 5 years building my other business. so relearning blender etc). Animating, and building assets. Nothing to do with luck, everything to do with my attitude :). Am I a pro at blender or mesh? heck no i have heaps to learn but I avoid un-necessary work. Yes SubD is useful. It depends what and how and where the mesh is to be used. A lot of people think of how to add detail to their model or make it look better faster and they click "Sub D". I dont use hard ops or box cutter but seriously considering it as well as learning hard surface modelling to a higher level. Your entitled to your opinion as Im I. All the best.

@TheMonLust 3 года назад

Hi, u're creating great videos. But on 15:46, what is this tool for cutting?

@PonteRyuurui 3 года назад

Thanks! It's Boxcutter addon, here Buy HARDOPS and BOXCUTTER addons (affiliate link):gumroad.com/a/95646835

@HarvestrX Год назад

What about topology? The last mesh you make has a ton of ngons. I'd love to find a final answer on if wan when to accept them.

@PonteRyuurui Год назад

If you are stuck in the 80s then you ll worry about ngons

@hihellothere9569 Год назад

@@PonteRyuurui I thought the more of that stuff is gonna kill a pc

@niemanickurwa 3 года назад

Always forget about lattice, it really is great.

@PonteRyuurui 3 года назад

yup

@ajuelee 2 года назад

THANK U for sharing .Where can find out occlude ande auto merge( 16:47) Please~

@PonteRyuurui 2 года назад

machine tools, links in the vid descr

@ajuelee 2 года назад

@@PonteRyuurui thank u so much！

@marsmotion 3 года назад

nice hybrid technique. the truth is also that alot of animation doesnt need quads either. what you need is enough somewhat regularized across an area topology. even anim meshes in a game engine get triangulated as well. triangles draw faster on video cards. people have these old ideas and go for the perfect when 90% of the time the good will suffice....

@PonteRyuurui 3 года назад

yup, exactly, evenness of polies is the key to clean shading on curved or bending surfaces.

@robantonio306 2 года назад

Hi, can someone tell me how to find that "red fence" select and boolean function used at 6:43 on?

@PonteRyuurui 2 года назад

it:s boxcutter gumroad.com/a/95646835

@saivardhan9821 2 года назад

Are you using any add-ons for Blender? Because Blender won't come with those advanced features, which you've used in the video. By the way, your work flow is really appreciable!!!

@PonteRyuurui 2 года назад

ya tons, mainly hardops boxcutter mesh machine machine tools and decal machine, got link to all my addons in the vid descr

@tris0913 3 года назад

xecuntville. cool file u got there

@PonteRyuurui 3 года назад

haha ya it's a game project, evil aliens, thus xenocunts

@cas_vis Год назад

I enjoy your videos. "You can cut the shit out of it." lol

@elvinkey9x 2 года назад

So I should stick to subD if im creating game asset? Cuz I need to bake highpoly into lowpoly model. Or Can I just do hardops boxcutter and then dice my model densly?

@PonteRyuurui 2 года назад

it depends, on its purpose, type, animation method, etc

@shana_dmr 2 года назад

For game assets you can cheat a lot as highpoly is throwaway so can be whatever polygon soup as long as it bakes correctly. Super fast and dirty method is to make your model with booleans or even CAD, slap it in ZBrush, dynamesh, polish and voila - you have high poly to bake (yes probably a million poly one but on modern computers baking times are irrelevant) :)).

@tsoruu 2 месяца назад

Hi, I'm new to 3D modeling and got a question to ask... Would ngons be hard to be textured? I'm honestly very comfortable with the workflow you shown and would probably follow it, but without addons like Mesh Machine and stuff, wouldn't the topology be a mess? How would you handle your object's topology after you finish setting your initial object's shape? (I'm sorry if it sound sarcastic, but I honestly want to dive deep in 3D modeling and honestly want to know the answer TwT)

@PonteRyuurui 2 месяца назад

If you're new this may be a tad too advanced but we cover the entire workflow for ngon based game assets www.blenderbros.com/the-blender-bros-hard-surface-game-asset-course-2-0

@tsoruu 2 месяца назад

Yeah, I talk around with the Blender Guru Discord group and understand what to learn now, Thank you for your reply!

@yashrajkashyap572 4 года назад

Blender gangsta's here

@PonteRyuurui 4 года назад

that's the place!

@jeffspinner6579 4 года назад

Would it be possible to use screencast keys even on videos like this? You did a couple of hotkeys Idr knowing, and it would have been useful to see the key pressed (even though combination or multiple key presses don't always show...) I thought you could use subdiv after your bools. I saw you still have issues with that and you did subdiv after bools in the part 4 of the Mech Hercul3 ~12:50, you tried Mira tools, when I thought maybe a machin3 normal's stash and transfer would work? Idk. I'll have to see, given I've been fighting Darth Vader, since he's not allowing me to rig him with rigify or arp for a few days now. When cheap assets are not worth the price! All I know is watching timelapse in 0.25 speed still saturates my little brain, I'm gonna take a nap now, tyvm.

@PonteRyuurui 4 года назад

This fucking thing didnt work again? Man this addon is such a garbage. I talked to pro3, they might be developing their own keys addon for hardops. So I cant bloody wait. It was not intentional man, sorry about it. Also, screencast keys wont display keys in bc mode.

@jeffspinner6579 4 года назад

@@PonteRyuurui, no worries. I'm trying to optimize my rehearsal of anything I can to learn everything I need, and I think learning Blender with Hop/BC/MM/Machin3/ARP/Rigify yada yada yada, with UE4/V-Ray, it's Materials system, its Particle system now called Niagara, because you want to jump off Niagara Falls trying to use it, and Cinecam system with almost as much control as a Red Dragon Cinema Camera, DaVinci Resolve for my Post, HoudiniFX if Khaos won't cut it for my pyro, and god knows what I have forgotten I'm learning (I just finished watching a time lapse of yours, and I think it saturated my little brain, so I'm gonna take a nap), phew, ... every little bit helps. Especially given Idk y I can't get one of my assets to rig with either rigify or arp, so I'm gonna cut him up and rig in sections to see if the mesh is fk'd or something, that I don't see otherwise. 3 Days trying different ways of rigging what seems like a straight forward asset, pisses me off. But my machinima awaits... 2 months ago I did this, and I didn't know much about UE4, (I rendered 51 sec of animation in under 3 mins, compared to 3 sec of animation in 10hrs in e-cycles...and in UE4 it looks better!) here's the last 21 secs, re-rendered in V-Ray in under 3 mins too... imgur.com/H5i2hkT consider this was only an animation test. I didn't work hard at all texturing the scene, or have a good hdri or cubemap... oh, turn your sound down, just in case.

@Wzxxx 3 года назад

The question is : will this boolean mesh look so good with some reflecticr material especially near beveled holes.

@PonteRyuurui 3 года назад

if geo is dense enough yes, if it doesnt, then normal transfer the data

@Wzxxx 3 года назад

@@PonteRyuurui ok. Thank for you quick response. Awesome channel. I need to learn this normal data transfer. This method works only with all bools applied yep?

@PonteRyuurui 3 года назад

@@Wzxxx yes, there are few ways you can do it. I have vids on mesh machine n transfer, and Josh has for vanilla. You could also look up our Boolean Handbook where we show a lot of techniques. www.blenderbros.com/products

@3dsmax_metronomus480 3 года назад

What do you think about cars? Could you model a car without subd?

@PonteRyuurui 3 года назад

i dont model cars mate, scifi vehicles are easy without subd, we even have tuts on it gumroad.com/l/GnHrV

@3dsmax_metronomus480 3 года назад

@@PonteRyuurui I don´t really care for car modelling, but unfortunally I need one for my scene.Thanks, your scifi vehicle looks awesome!

@PonteRyuurui 3 года назад

@@3dsmax_metronomus480 for traditional cars with tons of curved srufaces you might be better off with quad modleling, or you could sculpt it and retopo, of model it and use quad remesher addon

@3dsmax_metronomus480 3 года назад

@@PonteRyuurui Thanks, I appreciate your advice!

@harytamo 2 года назад

Hello from Russia)) What you use for do it this things? I am impressed because I use it very often subdivision

@PonteRyuurui 2 года назад

Not sure what you mean, but if you are talking about addons, then it was hardops and boxcuter.

@harytamo 2 года назад

@@PonteRyuurui Thanks!

@gevikshanazari9972 2 года назад

peachy

@waltage 3 года назад

but what about "INDUSTRY STANDARDs?"

@PonteRyuurui 3 года назад

fuck'em

@waltage 3 года назад

@@PonteRyuurui lol

@SoftBreadSoftware 3 года назад

There isnt really a standard workflow. It's the result that matters

@PonteRyuurui 3 года назад

@@SoftBreadSoftware boom! That is it.

@leonaluceid2388 2 года назад

Sir some people hates N-gon how i tell them the N Gon is ok

@PonteRyuurui 2 года назад

show them

@amylouis7750 3 года назад

WTF your voice like screamer ahahah am scared))) thanks for video

@PonteRyuurui 3 года назад

it is meant to haunt you when you procrastinate and find excuses not to study hard surface

@AleksandarPopovic 3 года назад

Finly someone say somthing about this if you make models for game you can forget subdiv.....polycount, in som situation caracter modeling or somthing organic very rare, this is old modeling technic.....evrybody subdiv subdiv subdiv that mashes don have value that mesh canot sell you have only nice render picture and that is it unable with that amount of poligons and if you use subdiv you must give good amount to get good result.....make low poly mesh to look like milion poligon that is the trick......finly someone say somthing about this......good job.....keep going

@PonteRyuurui 3 года назад

cheers mate, yeah ppl like to run on myths