No video :(

Show Your BL Motor Some Love - How To Clean & Rebuild A Brushless Motor - Holmes Hobbies

Подписаться 50 тыс.

Просмотров 27 тыс.

50% 1

So, you think it's finally about time to hit the workbench and give your rig a thorough cleaning? You clean the chassis, the suspension, the driveline. But, did you clean your motor? Your brushless motor needs some love too and in this Holmes Hobbies video, John is going to go over all of the details on how to clean and rebuild your brushless motor. You'll need a few tools, a screwdriver, a hex driver, pliers, oil and even some water and soap. Oh and don't forget a soft bristle toothbrush too. No, not a family members toothbrush! All of these items along with the tips in this video will help you rebuild your motor with ease so it will perform out on the trails and increase its longevity too.
For Rebuilding Service Visit: holmeshobbies....
PRODUCTS MENTIONED
Puller Pro Stubby 540 bit.ly/2Td5B77
Puller Pro Faceplate Assembly bit.ly/2PvazOb
Pro Puller Sensor Plate Assembly bit.ly/2zXfugp
See More Electronics Videos:
• RC Electronics (Review...
FOLLOW HOLMES HOBBIES:
RU-vid: / holmeshobbies
Website: HolmesHobbies....

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@HolmesHobbies 5 лет назад

Who has used the tips mentioned in this video to clean their brushless motor?

@rcnoypi8758 5 лет назад

Not yet coz still brand new..but I will follow your advice John:) thanks!

@maartenvandyck6768 5 лет назад

Having a puller pro 2700kv that feels grindy when i twist the shaft. Gonna open it up with these tips. 👌🏻👌🏻

@hellbillywv5724 4 года назад

I just watched the video and took my Trailmaster Pro 2700 apart to clean it. With the exception of a small amount of mud it looked great. I cleaned it with a soft toothbrush and soapy water, rinsed and waiting for it to completely dry to relube bearings and reassemble it. Great motor, great video thank you sir.

@sanchoancho6510 4 года назад

I just did. Also, going to order up some spare parts for my 3500KV puller pro.

@lrburns4 4 года назад

Thanks so much! Doing bearings and cleaning in used trail master that saw way to much water in a past life!

@Exstaz 5 лет назад

Cool Casio watch. I used to have a calculator watch when I was young in the 80’s.

@MadDragon75 3 года назад

I'm loving the way soft foam pack stuffs between the shaft and magnetic pads using a flick gesture to wipe out iron filings.

@bucksrcworld8119 5 лет назад

this was super informative on cleaning a brushless motor, awesome!

@johnwagner4559 5 лет назад

Yup! Closeups would be quite helpful.

@HolmesHobbies 5 лет назад

noted for next time. Two cameras!

@glennhobbs59 5 лет назад

I find that 3&1 oil works great

@pyroskeg69 5 лет назад

As always , Solid Vid John 👌👌, Still in love with my puller pro 2200 😎🤘 Had no idea you sold the ends with bearings pre pressed😶 , that's Very hand to know😀 . Keep up the good work😎😎. Cheers, Matt

@tumtuber 5 лет назад

Thanks for this video, John. Could you make a vid about ESCs in general. I’ve never fully understood why quality ESCs are so pricey. Thanks again!

@HolmesHobbies 5 лет назад

I'll put it on the list

@shend_yulian 3 месяца назад

can u make video clean up brushless quickrun fusion se?

@tomhol8559 5 лет назад

Bookmarked for future use👍

@nicholasbarber4193 5 лет назад

Next one should be cutting the comm and doing a brushed rebuild. :D Old school FTW! lol

@HolmesHobbies 5 лет назад

Got an older one. Want more? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9y-e1gq_YS0.html

@nicholasbarber4193 5 лет назад

@@HolmesHobbiesOh yeah, I forgot about that one.

@humblerc841 5 лет назад

great info john, thank you.

@WSquared60 5 лет назад

If my end bell doesn't make that noise when I pop it off should I use a longer screwdriver?? I would've liked some tighter closeups, but this is good info, JR, thanks. I'm still breaking in my first BL motor but this is bookmarked :)

@HolmesHobbies 5 лет назад

Twice as long of a screwdriver at least! We will get those close ups next time.

@puzzleluvr 5 лет назад

Boop!

@blackopal3138 Год назад

i TOOK MY 10AMP POLISHER APART, oops, lol, and I can't get the rotor back in. It needs to sit in the center ring at the bottom, but the magnet is so strong, I can't get it passed. it's about 6 inches long.... Any tips? ty

@00godlovesus 5 лет назад

Thanks Boss

@datboy5039 3 года назад

Hey quick question, my motor has three Phillips screws as well in the back and I have snapped two bits off in them already. I was able to get the bits of bit out of the screw but is there a trick to loosening those screws so I don’t snap another tip? I hope this makes sense thank you

@mikethompson7610 2 года назад

On a 6400 how often should you put oil on the Bearings

@darrenford939 3 года назад

I like this vide. It gives me confidence to have a go. I have got a Hobbywing motor G3R 13.5 Turn in particular. I am just wondering if you have any information about this particular motor. Before I go ahead and clean it for the first time. I am just a bit nervous about it.

@HolmesHobbies 3 года назад

Go for it! its no different.

@hickslightfoot 2 года назад

I wish the camera was tight on the motor . Seeing the entire background, although lit well, was useless to see…

@Osrszombie Год назад

Thanks stabbed my hand with a screw driver had to go hospital to get it removed and glued.

@donmartines689 4 года назад

I need help Disassembling a castle 6900 KV cm36s BL motor I can’t get the ends off and I don’t want to damage anything trying to replace center shaft Any help would be appreciated

@demerymusic11 3 года назад

Do you still rebuild motors? If so I have a redcat kaiju motor that won't turn.

@chrismooneyham5279 2 года назад

Dont know if you will see this but I have a 3650 3900kv that snapped the shaft right behind the pinion first run. Less than two minutes on this motor! Any hope of me rebuilding?

@HolmesHobbies 2 года назад

If the company offers replacement rotors