Shower Drain Plumbing Mistakes and How You Can AVOID Them

Подписаться 618 тыс.

Просмотров 69 тыс.

50% 1

This video shares shower drain plumbing mistakes. After watching this video you'll know how to solvent weld properly, avoid water leaks, and save lots of money
#plumbing #showerremodel #homerepairtutor
Shower Drain Plumbing Mistakes
0:29 How to cut out old shower drains
0:45 How to deburr and chamfer shower pipes
1:15 Shower drain p trap
1:35 How to plumb a shower drain
4:35 How to solvent weld KERDI-DRAIN
These supplies were used in our video:
-Fein oscillating multi-tool
-BIM blade for oscillating multi-tool
-DEM4 chamfering tool
-Pica Dry Pencil with white wet jet insert
-Schluter KERDI-DRAIN
-Reed tubing cutter
Some product links may be Amazon affiliate links. As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.
Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.
Disclaimer:
Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@Sunnyside--Up 7 месяцев назад

So nicely detailed. Thank you very much!

@HomeRepairTutor 7 месяцев назад

Thank you 🙏🏼

@Limitless1717 2 месяца назад

Excellent video. Thank you.

@coffeeNbacon 7 месяцев назад

One weekend too late for me. But I'm glad I watched because I did not realize the P-Trap part that moved needed to be cemented. Luckily we are moving at a glacial pace and it can be addressed. I noticed I did not seem to have much time to make minor adjustments to my ABS when welding, maybe 2-3 seconds before it was stuck. I'm assuming this was because I did not put enough cement given how much I see you use. Live and learn. Thanks for you and your partner's videos.

@HomeRepairTutor 7 месяцев назад

Normally you just have a few seconds before the weld sets up. That and the fact that my eyes are bad are the reason I use the white Pica Dry insert. It really helps when the light is dim, which is common in plumbing

@ktate2002 7 месяцев назад

Excellent tutorial. Much appreciated.

@HomeRepairTutor 7 месяцев назад

Thank you 🙏🏼 hopefully it helps you with your questions

@frankj5947 7 месяцев назад

Love your videos. Will remodel soon and may signed up for tutorials. Thanks

@HomeRepairTutor 7 месяцев назад

Thank you, let me know if you have any questions. It would be an honor to help you with your project

@rhinorampage1807 6 месяцев назад

Your Awesome! very well done video! Thank you

@HomeRepairTutor 6 месяцев назад

🙏🏼🙏🏼

@rhinorampage1807 6 месяцев назад

@@HomeRepairTutor I had noticed you always chamfer the pipe, best practice I’m sure but I’m well aware most plumbers skip this step. I hadn’t chamfered ABS either and had never had issues, however I would think it might help with getting the dry fit more accurate. I had found Often it’s difficult To get perfect measurements as the pipe will not fully “seat” itself in the fitting when dry and then when applying glue the pipe will fully seat leaving it a little short. Do you find with the chamfer helps with easier connections during the dryfit?

@maryv5558 2 месяца назад

This is exactly what I am doing today. Is there an alternate way to chamfer the pipes? I haven't been able find a chamfering tool locally.

@HomeRepairTutor 2 месяца назад

@@maryv5558 you can use a sharp utility knife to simply take off the cut edge, doesn’t have to be perfect or take more than 30 seconds

@maryv5558 2 месяца назад

@@HomeRepairTutor Helpful!! Thank you.

@robertthomason8905 2 месяца назад

@@HomeRepairTutormaybe some course silicon carbide sandpaper clean well. I have access under.

@francosantarossa8006 6 месяцев назад

Fantastic video. Thanks! Just one thing; I think you forgot the "gasket" under the drain when you cemented it to the riser piece. Maybe you just want to "keep us on our toes". 🤣

@HomeRepairTutor 6 месяцев назад

Thank you 🙏🏼 I used the foam spacer from the KERDI pan to get the riser pipe dimension. After I solvent welded the KERDI-DRAIN to the riser, I used ALL-SET to bond the spacer to the floor under the KERDI-DRAIN 👍🏼

@gocybertruck8189 3 месяца назад

The main pipe is vertical PVC, using a PVC P-trap, but the drainer is ABS. What cement should be used when connecting PVC to the ABS drain?

@HomeRepairTutor 3 месяца назад

Technically you can use Oatey’s Green Transition Cement. But I’d try to get a PVC drain

@kellyboyle3192 2 месяца назад

I use dry erase pens. Work just as well

@danielnolte3579 23 дня назад

What if you are putting a p trap in a 2x6 floor joist? Are there low profile P traps? My situation involves have a living area below the the shower

@Nomad33fw58FS Месяц назад

None of the names you listed actually bring up the tools you used. Do you have links?

@dottmanca 7 месяцев назад

Nice tips i was about to make the mistake regarding theeaded connection with no access in a couple of days... Off topic question. I dont see many videos in general about shower towers / panels (the wall mounted units). From what i can gather their warranties are not great + too many fairly new/foreign companies ... + Price... That being said to me seems like install and replacement would be easier. Even if you cant find the same company down the road, as long as you can find a simmilar one replacement is just two hose connections to the unit... Where as shower valves seems more involved especially if welded ... What are ppls thoughts, is there something else terribly wrong with these wall mounted shower towers why they are not used?

@HomeRepairTutor 7 месяцев назад

I would not buy any shower valves made by third parties and sold on Amazon. You’ll pay a cheap price but for a reason - the parts are plastic and the odds of failure increase with time. I recommend Delta or Hansgrohe valves. They have great parts, excellent warranties and the trim will last for years. Save your money and avoid any valve sold on Amazon, only buy valves from build.com or supplyhouse.com or local plumbing supply distributions

@dottmanca 7 месяцев назад

@@HomeRepairTutor makes sense, I have been using moen never heard of Hansgrohe I will check them out, but I will take your advice, thanks again.

@robertthomason8905 2 месяца назад

I liked your video but I was number 666 had to unlike to go back to 665 I'll check back later. Don't want the bathroom diy from hell. Thanks for the information. Getting more confident with each one I see before fighting the beast.

@cpnCaNuke 6 месяцев назад

sooooo I may have used a threaded ptrap in my shower install. I did leak test and it was fine. Will this fail prematurely? I can create access by cutting out dry wall from the main floor ceiling to replace it. Now that it's done should I replace now or wait for an issue?

@carolline3268 6 месяцев назад

After gluing and installing the flange. There ended up being a 1/4 gap between the foam donut and the flange. Is that a problem?

@HomeRepairTutor 6 месяцев назад

Yes, that’s a problem because you won’t be able to properly waterproof and water will pool at the drain if it’s higher than the tray

@carolline3268 6 месяцев назад

I still need to add all set below and above the donut foam. That will not fill the 1/4 gap?? When I remove the the donut foam and use the gray foam spacers, there doesn’t look to be much of a gap. About 1/8.

@HomeRepairTutor 6 месяцев назад

@@carolline3268 you can send some pictures of the drain to me at jeff@homerepairtutor.com

@georgevu2595 5 месяцев назад

Hello Jeff. I removed out tube and wanted to move and convert to PVC. However, All the old pipes and P trap a brass. Any recommendation.

@evanv602 5 месяцев назад

?? cut it out and connect a coupler in the middle of your drain with pvc

@georgevu2595 5 месяцев назад

@@evanv602 how do you do that. What type of connector do I need to connect it together.

@evanv602 5 месяцев назад

@@georgevu2595 If you want to save money, use a fernco coupler where there is enough brass to extend pvc pipe and just copy the old brass p trap

@seanblanchet1058 4 месяца назад

@@georgevu2595Fernco. Black rubbery coupling with two metal rings around it, you can tighten it with a 5/16 screwdriver

@jasonsandifer3250 2 месяца назад

I don't like apartment living, because many times when taking a SHOWER, or after using my toilet, I have heard noises, underneath, toilet or pipes noises, or other showers, or water running in other parts of the apartment complex, during the time I have been SHOWERING washing my body, or there will be water draining out of my tub, even when the drain lever is completely closed, water will still drain OUT when I want to soak my feet in the Tub. Author Advocate, Activist for Humanity, Jason Sandifer, Michigan, 7/09/2024

@beerye3750 6 месяцев назад

Im not a fan of pink insulation around areas where i could have water. Am I too paranoid? Lol

@brucestorey917 Месяц назад

It is a trap 90º - not a St 90º - there is a difference.

@cj4298 7 месяцев назад

This is quite detailed, but it feels like an advertisement for several brands.

@HomeRepairTutor 7 месяцев назад

I’m not sponsored by anyone and bought all the tools. These are just the tools I use for plumbing. Also, I’m not looking for any brand deals, too busy for their BS.

@Sunnyside--Up 7 месяцев назад

@@HomeRepairTutor I have some of the tools myself what you have, and they are life saver. So much time gets saved. People usually think, how do I MAKE things, well, there also is a part when you spend as much effort in dismantling or preparing your work space and if you were to use very simple tools, yes, great to have them but sometimes takes a very long time. Unless some DIY'ers don't want to put the effort and look for ways around it. Anyway, sorry but it is a senseless criticism. I usually want to know what some tool is called that makes my life easier.

@sparky2008sparky Месяц назад

Ur p-trap looks backwards

@user-qx3ph3xb6l 6 месяцев назад

I am no professional, you should wear gloves to protect your skin

@HomeRepairTutor 6 месяцев назад

Normally I wear nitrile gloves

@kidfusion3000 28 дней назад

you measured your depth for the drain pipe without the shower pan in place, that's probably going to affect your depth and fit.

@HomeRepairTutor 28 дней назад

@@kidfusion3000 you can do that with the Schluter pan because it has the foam spacers. In fact, the Schluter KERDI-DRAIN comes with spacers that the plumber can use to set the drain and account for the pan height. That’s what I did but with the spacer from the pan

@jasonsandifer3250 2 месяца назад