Showing A Beginner How To Vinyl Wrap A Roof 

I greatly respect the fact that u let a beginner wrap with u on the channel Shows a lot about your personality and it does help other beginners

you guys are honestly the most helpful wrapping channel ive seen so far, so clear and informative. Thank you for this tutorial so helpful

I wrapped the roof of my 2017 Mustang earlier this week and this video really helped me a lot. You aren't lying about Avery.... I originally tried to wrap it with 3M 1080 and it had all the crappy issues you described in your video where you did the yellow on the hood of the Ferrari... second time around I used Avery 900 gloss black, not a single bubble nor wrinkle. Thanks for putting all the effort into these videos, they're really helpful!

Your videos are awesome dude. Never knew what car wrapping was until my cousin contacted me about a month ago asking if I want to work for him. So far has been a trial and error but you are a savior.

Thank you for the video! I never wrapped a roof before and with your tutorial my roof turned out flawless!! I followed everything to a tee, same viynl, steps and tools and all by myself!

I love watching your videos out of order and seeing you look completely different in every one.

Love how the video is showing me (a beginner) how to vynil wrap my same exact car

You guys do such an amazing job. Attention to detail is phenomenal. It's the little details that impress the hell out of me.

About to go on my own wrapping adventure with my 2007 Mitsubishi Galant. These videos have given me the confidence to do it myself. Thanks for all the great tips and tricks and detailed explanations of everything. Keep up the awesome work!

Dude, your such a good teacher/mentor... good job man. Hope your business is going well, really admire your work ethic.

Nice work brother. The fact that you're filming too! I wish I had the time and patience in my life to wrap our cars. Thanks!

Thanks for allowing apprentice to do this. As a novice myself this video is totally relevant to a first timer.. I just picked up Hyundai Elantra N-Line and think it will be a challenge for me with the shark antenna and sun roof.

GREAT JOB Andrew and under pressure ,,Sounds like a Very Good Teacher Also Well Done Guys

You can also spray the vinyl with water to help you identify where you have already squeegeed

It was great to see a student showing your teachings. Great content man

Amazing job, I did blacked out my chrome trine and I have you to thank.

I would also advise you guys to spray just some water on the top of film once it is laid so that when you squeegee the vinyl, you know where you have done it and where you have not and it also prevents to scratch any gloss black or satin black film. I have particularly noticed these mistakes in high end shops as well I have had 99% success doing this so would request you to try this method out

Great video! Helped me out a lot! already messed it up once today but this makes it look easy! I already bought more to redo it lol

Thank you for all your videos. The more I watch your channel the more confident I get in wrapping my car.

I gotta tell you man I really appreciate your videos as I'm gonna wrap my car with Avery Rising Sun next year. Great commentary while doing fantastic job at the same time. Keep it up!

I like that you rarely cut or edit videos. Gives me an idea of how long it'll take in real time

Its looks so easy! I'm gonna to wrap my car for the very first time. Thaks for your videos. They are very helpful and clear. Greetings from Mexico!

Great videos guys. Watching and learning so I can attempt to do my truck

One thing I have noticed is that all the beginners are doing when they finish cutting a piece of vinyl is they rush with the cut at the end, like at least twice as fast as they were cutting it before reaching the end. Instead, look at CK, at the end he finish his cutting keeping the same speed. The reason for that is that the chances of your blade to jump and cutting on the paint are very, very high. I know this from self experience and I have seen others doing the same thing 😄 So take your time and don't rush, because you can ruin your nice job,right at the end of it.

Im glad i found this video i gotta wrap my genny roof tomorrow and this made my day thank you for this

This is really "WOW" - great, super - well done

Keep up the awesome work I look forward to checking out your program very interested in wrapping my own vehicles . Stay blessed

Good narration - good teaching - triangle was a neato trick. Thanks - I am going have go at this with my nephew's car as I feel more confident after watching this. Have a nice day. CHEERS from AUSTRALIA.

Bro your just a master can you watch your videos for hour to learn new skills keep up your brilliant work can wait to wrap my Acura TL👍

Planning on doing a diy wrap to the roof of my Altima. This video was great and really gave me some good insight as to how to go about it. Really liked how easy the Avery went on so I think I'm going to go that route!

Andrew did a great job on that.. some great tips also.. thinking about doing my mirrors and roof now..

Best roof wrap I've seen so far. Answered all my questions.

Good job guys, I like how to wrapping the cars also how you make it easier to us. Good luck guys

good luck Andrew. You're in a great learning position!

All your video's are GREAT ....Thank you for showing us how to do it too ....

Thank you!!! I was thinking about going with vivid but I'm glad to see other options are just as viable! ✌

Doing this today with hi gloss black from vivid on my Cruze. The hardest part seems like it’s taking the shark fin antenna off. Started carrying kayaks and I don’t want the roof racks and straps etc damaging the actual paint. Thanks for the vid!!

Just did the roof of my 02 bugeye wrx. Vivid matte metallic purple. Very fun to work with. Very high tech stuff. Had alot of fun. Didn't consider it work at all. Would love to wrap for a living.

Thank you for the window trim tricks.

I’ve been doing vinyl graphics and wraps for almost 20 years and you’re literally the first (and only) person I’ve heard say they prefer Vvivid over 3M. Not saying Vvivid is horrible, but preferred over 3M? You definitely know what you’re doing and the roof looks good, but I’m also surprised to hear you recommend Avery for first timers considering how easy it is to overstretch, not to mention how careful you have to be when using heat. With 2080, or even 1080, you can literally remove the backing, crumple it into a ball, and with a little heat bring it back to perfect. I will admit 3M’s Carbon Series, especially in matte, can get extremely brittle when handled in cooler temps. Vvivid definitely costs less than 2080, even their Premium line is priced very well. Personally I think Vvivid is great for piece work, such as rockers and lips. Avery is ok for wraps but is the best choice for plotted work, such as signs. 3M 2080 is my favorite for complete vehicle wraps by far. Your channel and content is great! 👍

Very informative and helpful. Thanks

excellent video! very clear and concise. I have one question, I would like to wrap my roof, but the clear coat on my rood has began to peel, should I sand and feather out the clear before applying the wrap? thanks

Awesome well explained, well displayed ,well executed. Well impressed tbf 🙌🏻 All the daft videos I watched before this one 😡😡🤣😂

Explained perfect enjoyed every minute really has helped me out on wrapping my own car now A1 5*****

Is the wrap safe going through automatic car wash brush? Will it worn out the paint wrap over time? 👍 Great video!

I've learned how to rap from watching your videos. I did my first rap yesterday. I rapped my mirrors and the door handles on the right side. I couldn't even finish the left side the same day. Rapping takes a long time and it's a workout. Gezzz☝🏽

What is the room temp when you're putting this down?

I'm sorry if I sound dumb but I'm still a tiny bit confused on bridging the gap. Do you just leave a tiny gap between the 2 parts?

Nice clean work.

If anyone is watching this and thinking about using Vivvid, be warned! Vivvid will not pull tight and smooth like the Avery in this video! Get the Avery and do it stress-free the first time. Maybe vivvid is a good product for other applications (smaller areas/less curvature), but for my roof it was a nightmare to work with!

Man I just tried to wrap my roof and it was a disaster. I'm going to try this method. This makes more sense

Awesome who needs to pay for a course when you have this guy

Well done, great video 👍👍👍👍👍

I’m learning along side Andrew

Super clean🙌🏾🔥

Would love to see a wrap of the C6 Corvette halo pilar. The center is an inlay and the edges have a compound curve wich tends to pull the wrap out of the inlay.

Do you have more videos vynil wrapping other parts of the Genesis coupe?

that was a very nice and helpful video.... thank you guys....

Wish this also included the actual roof rack portion removal and wrap. Good video very informative

Man that material is so easy!!

I want to do that for my toyota C-HR, but it has a antenna fin on top and a spoiler attached to the hatchback part that has a 3 arm extention,

Like the way u break it down no bs 🤣 keep up the gud wrk 👍

Le quiero dar las gracias a Ck, vi varios de sus videos pude colocar el vinilo en el echo de mi coche, al 2do intento quedo bastante aceptable pero..... Parece muy fácil pero no lo es.., a ellos si, son profesionales, incluso el chico que forra ese techo. pero no crean que a Uds. les va a salir igual... una idea es usar agua jabonosa, como cuando se instalan las laminas para oscurecer los cristales. una cosa que yo hice fue dividir la lamina en dos mitades y así fue menos traumática la experiencia. Lo otro que es un mito es que Uds. van a poder usar el cutter como ellos, tiene practica que les da la facilidad de cortes rectos y parejos . Otro concejo, cuando Uds. se dispongan a probar por 1ra y/o 2da vez, contar con el doble del material (vinilo) del que se necesita, probablemente tendrán que hacerlo dos veces. Una cosa si es cierta, el uso de la pistola de calor es fundamental para quitar las arrugas que se les van hacer en el vinilo además para vencer la memoria del material pegarlo a superficies difíciles, ángulos, curvas, convexidades, concavidades y un largo etc. Para terminar me hubiese gustado que explicara como quito la antena alea de tiburón así hacerme mas fácil la vida

Thank you for your video I was all excited saying I could do that then I remembered I have a sunroof lol lol

Goood help thanks from México

Tried with vvivd, the most difficult and unworkable vinyl wrap out there…This Avery wrap is a dream…glass dream

Wish I could post a pic. I was at a dealer the other day and you should see the crap wrap job they did on a brand new car. It was like the roof and the mirrors and there were cut marks and white paint showing on the edges where they didn’t tuck on the mirrors. Was pretty sad that I noticed it being I’ve never wrapped a car but I’ve watched a shit load of videos. Can’t wait to wrap my first car. I’m looking to buy a 350z so that will probably be my first wrap. Great videos I’ve learned a lot.

Great job guys! Definitely informative. For the vinyl that the first guy squeegeed down, between the front of the windshield towards the rear windshield.. Was the vinyl heat shrinked to make the edges straight after being cut?

That is a good head of hair my man!!

This is an old video, I'm on a binge sesh so I doubt anyone is really going to see this...I'm just entertained by the size estimate of 'a quarter of an inch to half a centimeter.'

Im planning on wrapping my roof of my truck and stumbled across your channel Christian. I am grateful i did. Your videos are very informative and give me a lot of confidence to tackle this project for the first time. I originally was going to get vvivid but after seeing some comments and this video i have decided to go with Avery satin Black like this wrap in the video. I do have a few concerns like: I dont have a garage and live in an apartment, so i will be doing this job outside in the Florida sun. I am concerned, but went ahead and got a prep cleaner/Rapid tac. Hopefully that helps with premature adhesion. Dust is also a concern but i think i can clean and prep the roof and glass out the vinyl fairly quickly. Wish me luck.

could the triangle/squeegee not be lubricated to reduce friction and aid sliding ?

Excellent video....very imformative

thats clean bro...

really good video, really appreciate it. thank you!

I love to work with Avery vinyl because you don't have to use heat.

Another awesome video, thank you, you're a great teacher! What is the vivid satin grey colour on the sides? Do you still recommend it? Thanks

Always the professional!!

thanks very much!

Damn I spent hours on the roof with vivid. The fact Avery is pressure sensitive I should have started with Avery first.

Wrapped my first roof yesterday.... looked good, woke up this morning... still looked good..... that mid day sun hit it and bubbles just start poping up

That is dope thanks for this I been wanting to try on my altima but don't know were to start lol

How does Avery work with Knifless tape?

I'm gonna do this tomorrow. Thank you

Think I can do a gd job wrapping my vauxhall astra from white to metallic purple after watching yr vids...wheres best to order fromthats not to expensive and delivers to ire ?

Hello my roof is a mess and I want to do a wrap. I don’t have a job and want to save money. I was wondering what kind of glue or anything for this to work on Avery wrap. Please advise and also I have fading roof I own a Honda Pilot. Please provide product information to start of thank you very much love your videos

Thank you guys 🤙🏻

I would love to see how you do the shark fin wrap

great work! I have a Lotus which has a composite body, what do you use instead of a magnet?

I only put the blade length on the knife as far out as it needs to be

Man, I wish you were closer, I'd have you wrap my car.

I need a CK Wrap certification hanging in my shop

First off thanks for your videos! Ive done some small wrap projects and Im about to tackle a roof for the first time. Im looking at my car and both the front and back windows of the 3series BMW have no rubber in-between the glass and paint. There is a somewhat large gap so I'm wondering if you have any pointers on how to finish the front and back without exposing any paint. Thanks!

I wanna learn this a good hustle

Looks a lot easier than vivid. Took me forever with vivid.

DO YOU KNOW HOW LICKY YOU ARE TO BE LEARNIBG HOW TO WRAP BY CK WRAPS? MAN, SAVOR THE FLAVOR!!!!

What size sheet did you buy? For a Sedan…

really good video, but I wish you would have included taking off, wrapping and reinstalling the water sill trip part. Would it be reasonable to wrap all that with one sheet? I do not use the roof rack part of my car

Very informative channel with good explanation. Is there a link where I can get this vinyl?

My Audi is all aluminum body and the magnets don't work. Any suggestions as to a work around? Wrapping myself