Siemens 808D Advanced | Network Drive Setup | Windows 10 & 11

Подписаться 93

Просмотров 4,2 тыс.

50% 1

G'day viewers, today I go through the setup of the Siemens 808D Advanced - Network Drive for Windows 10 & Windows 11 Users.
The Network Drive feature is a great convenience and allows you to leave your USB in your computer and easily transfer files between your CAM software and machine.
Siemens have not done a great job, however, in updating documentation relevant to the 808D past Windows 7, and even then, is lacklustre for a networking novice as myself.
Hopefully this tutorial helps you get your Network Drive up and running, if you have any questions leave them down in the comments or contact me directly.
- Aaron F
Precision Perth Engineering is a Rapid Prototyping, 3D Modelling, and CNC Manufacturing firm in Perth's northern suburbs.
With over 6 years of SOLIDWORKS expertise and 4 years of Fusion 360 experience, we can provide you with exceptional production capabilities and quick turnaround times for those critical projects.
No job is too small, one-off parts are welcomed.
Send us an email: precisionperth@gmail.com
- or -
Call us: +61 421 021 071

Опубликовано:

22 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@r.shkr.j Год назад

Thankyou 😊

@protoperth Год назад

No worries Jegan, hope the tutorial was helpful

@MrRctintin Год назад

Awesome job buddy, going to take a few views to follow it. I need to get some cat 5 cables from my office to my workshop so I can setup a remote desk top and a hard connection to Syil X7.

@protoperth Год назад

Thanks Rob! Regarding the cables, you can try what I did. The workshop I am in does not have ethernet ports, so I purchased a WiFi range extender with a LAN port, plugged it in close to the machine and ran a cable between. Works fine and saved me running a 30m+ cable.

@Legendarybeatzonline 10 месяцев назад

2:26 if you used a range extender, how did you actually connect the cnc to the network, did it automatically join the network? Even if the wireless network has a password?

@protoperth 4 месяца назад

@@Legendarybeatzonline Hey mate, the range extender that I used has a lan port, which meant I did not need to run a special ethernet port from my router to the machine.

@snapta 5 месяцев назад

Hello, we have a CNC machine of the same model, but there is no direct connection visible on the network drive. What is the reason and how can we solve it? thanks.

@protoperth 5 месяцев назад

Hey mate, what do you mean? Did you check that’d the Ethernet connector is plugged into the controllers pcb?

@SamiTheAnxiousBean 6 месяцев назад

1:33 question.. what if nothing gets autofilled, we did a power cycle and it remains blank

@protoperth 6 месяцев назад

Hey mate, have you pinged the controller to confirm it is on the network? Also check that the ethernet port is connected inside the controller, sometimes the cable inside is missing/disconnected

@SamiTheAnxiousBean 6 месяцев назад

@@protoperth The machine itself did not come with one, we installed it ourselves (it had a ethernet port though just didn't come with any cable) as for pinging, the ip address the machine gives out when you open service control does respond

@protoperth 6 месяцев назад

@@SamiTheAnxiousBean Ok, if it does respond, does the rest of the setup work? If not, what stage gives you troubles?

@SamiTheAnxiousBean 6 месяцев назад

@@protoperth the stage that gives us trouble is the one i timestamped in the original comment, instead of autofilling with its own information when rebooting the machine it stays completely blank

@resulkarakurt5836 4 месяца назад

Hello, what you have done is to create a public folder over wifi. There is a distance of 100 meters between my computer and my machine, so I took an internet cable and connected one end to the machine and the other to my computer. I am trying to connect the two using the access mymachine program, but it does not work, can you help me?

@protoperth 4 месяца назад

Hey mate, I have not created one over wifi, rather a local network. My machine does not have wifi and at the time of this video, we had a similar distance. Ethernet will work better, and it is what we used. What step are you able to get to?