Siemens S7 1200 "Modbus RTU" Sinamics V20 VFD 

I wanted to use your guide for setting up the device. but unfortunately it does not have such parameters. how to find them? Unfortunately I can’t configure it through macros. sinamics v20 fsc

Goodnight! to make modbus communication with several inverters in cascade as you would indicate?

Hi i am having two v20 drives connected to cpu 1214. They are running in auto mode with analog input controlling frequency. Also the inverters are connected to cpu thru modbus. Currently i had a drive issue and replaced with new drive. Now the drive is running but the rpm, current data not coming in cpu. Kindly guide

How to cancel the negative sign, as the speed value appears on the inverter screen as negative؟

i followed exactly your video and i still have no connection from my rs485 leds are off....i used both channel 10 and 11 to try modbus rtu connection but no connection do i miss something thats not on the video?

Hello dear I got a fault 8180 on my master bloc or my id port is correct. Could you please helping me ??

Thank for such a informatic video. I want a solution , after setting all parameters in sinamic v20 the drive frequency limited to 22.74 hz only . As i already provide min and max frequency. Please help

I have a doubt how can we assume and add those numbers to control word to control on and off or rev or fwd .i didn't see those numbers in manual Can you explain me sir

I'm using CB 1241 - 6ES7241-1CH30-1XB0 (rs485 module) but cannot get the communication to work using this tutorial. please help

Do you have video on S7 200 & Micromaster 420 USS Protocol communication?

Mucho gusto, una consulta referente al modulo RTU, que referencia tiene Industry Mall, muchas gracias.

Not only show You will explain every point and every block of this program

How to read faults via plc modbusRTU?

hello, if I change the frequency and it doesn't change on the v20 do I have a problem with communication? how can i check this?

Can you make a video where you control the v20 with codesys? For Example with a Raspberry Pi. I am trying to control a v20 with modbus in codesys but i dont get the fault. I dont know what i did wrong. The videos with Siemens software exists often, but nowhere i found one with Codesys to control the v20. Thanks :)

can you give me the program please? i cant download from your website sir

why we use max for the scale o/p 16384 ?

Hi, can you show your wiring on the plc from the drive?

+ Set Word 40100 = 1151 >>> Forward Run = 3199 >>> Reverse Run. How about 1151 & 3199, could you explain Please?

Make.a tutorial using factory Io..pick and place using analog signal

vc pode enviar o projeto para o tia portal

como baixar o projeto gostei muito

#plc247Automation Sir I need to talk. How can i contact you