Siemens TIA Portal & Factory IO (Creating the PLC Program for Conveyor Sequence, Siemens S7-1200) 

I have to say that you are the best on RU-vid to explain exactly what's going on. Keep the good work and thanks for sharing.

Good and educational video. Got a test coming up where i need to automate drills in certain order, probably will work with similar principle.

i have a project to do for university and you helped me a lot :D thank you !

Best Teacher! Very Helpful! Thanks a lot!

Great tutorials I have ever seen because all your videos looking to help me lot

This lessons is very helpfull! thanks for making this.

thanks a lot, very well explained, I wonder why there aren't too many thumbs up.

You're good at explaining, thanks

Many thanks for Great work 👍

hello you are very good in explaining. i hope you will show us the sorting based on height advance. thanks for the shared material.

Beautiful Explanation!!!!!

Need to implement slow motion since my eyes are looking at 2 windows. Overall excellent instructions.

Thank you so much

thank you

Hey man, great tutorials really learning well! Got a quick question. I have created a similar block on a conveyor and using a S7 1200, but what if I want to control through Profinet rather than hard wiring the sensors and motors etc? Using a multicontrol to control sensors and motors btw. Thanks

Good, but it seems to be missing NC TT Limit 90 before TurnTable Turn and some rungs about the Turn Table turn back.

I am still a beginner how do i know that these are supposed to be input and these are supposed to be outputs and these are supposed to be static values???

Hello! Can you explain please how do you made the turn-table to rotate to its initial place? How do you made the rotation direction to change?

I'd agree with most of it, except for the Timer used on the conveyor. Why not use a Negative Pulse edge to stop, then the box would trigger the Sensor 1 (positive / rising edge) and when it passes the box the program would trigger a negative / falling edge which would trigger a 1 (on the ladder logic) causing the conveyor to stop - reason being if you have an adjustable speed conveyor (which isn't the case here I know but as a teaching video it might be a bad habit some people would pick up). Just my 2 cents.

hello,do you know the program of light array sensor?I want to learn about it,thanks.

Very good explanation. I have a question which may sound stupid. Could the program be simplified without those "limit" diffuse sensors 1, 3, 6 before and after the "turntable" ?

Just curious, could turning the turntable roller off be as simple as using the negative pulse of Diffuse Sensor 6. As in -|N|-? Can use same command to release turntable turn holding contact

thanks

This video helped out so much but I just have one question really because looking at your plc program when the turn table turns the 90° what in your program makes it return back to its home position because I cant see that bit in your program because wouldnt you have needed to use a sensor on the last conveyor to make it return or am I missing something it would be nice is someone could point this but out for me

sir wer can i download siemens TIA portal?

great video. very educational. just one question sir....... how can i get your software?

sorry, what the aplication we need if i want to learn abaut it ? thanks

Sir in case of faulty or short circuited coils our plc can be overloaded so how can we add protect if our relay or magnetic contactors coil is burnt out ???

Very clear! thanks Pete!

Why on this video defuse sensor has red light,but on previous video it doesnt have?

Sir Can You Tell Me How This Turntable turn back to its rest position ? and please where is the 90 limit sensor please ?

Here is a link to purchase Factory IO. (Note: this is an affiliate link for my channel) factoryio.com/url-action?ref=petervree Full Siemens TIA Portal PLC Programming Course available here: petevree.thinkific.com/courses/siemens-tia-portal-plc-programming Playlist Link for further videos: ru-vid.com/group/PLyL0ResmI4Q2Rz5wtTKWhKhFMLnWU1n6Q

Hi ,Sir Pete Vree i need link download program PLC Siemens TIA you teach .

hi, do I rotate to the other way?

Hi, Can you please recommend me course for tia portal, have you some course there can i buy it, thank you.😊

Hi, where can i get TIA portal, plcSim and factory i/O?

do you need to connect the actual plc through ethernet?

How many network for this project?

Can u please lend me the software or link of it please.

nice but.....that is called "spaghetti software" (or maybe 'sausage softwware) development....no analysis, no design...directly to coding.....the professional alternative is to make an analysis & design drawing a finite state machine FSM (on a piece of paper or electronically using e.g. QFSM freeware) and then implement the FSM in ladder logic or as function block ...use memory elements like S0.0 , S1.1, S1.2 etc as states (with the corresponding comments to interpret them) to be set and cleared and SCR, SCRE to start and stop the code section for a given state and SCRT to transition to the next state within a given state .....(SCR and SCRE is al ike a case ...break statement in C/C++).....that way the code is absolutely readable and understandable , you just modify the code that affect one single state and therefore reduce the risk that one modification will not break havoc the rest of the "sausage software"....unfortunately most software engineers are unable to understand or implement a clean FSM.....we electronic engineers are much better at that because we learn it on digital design....

HAHA, should grab a tea atleast,

Hello, Very good explanation on this project, one thing is good for kind of step by step you are explained , Great ..need this project details, can you please send me . reply me so that i can share my email id.