Siemens TIA portal Word logic instructions AND, OR, XOR, INV, DECODE, ENCODE, SELECT, MUX, DEMUX

Подписаться 31 тыс.

Просмотров 9 тыс.

50% 1

Siemens TIA portal Word logic instructions AND, OR, XOR, INV, DECODE, ENCODE, SELECT, MUX, DEMUX. In this video, we are going to discuss how to use AND, OR, XOR, INV, DECODE, ENCODE, SELECT, MUX, and DEMUX. Learning to use these instructions enables you to write and generate your PLC control programs in a more efficient structural way. At the end of the video, a practical exercise shows how to use these instructions writing a control program to control 8 ticketing gates.
We are calming our TIA PORTAL tutorial video series are the best tool to learn the PLC programming because you do not need to have a PLC or pricy TIA PORTAL software to learn how to program Siemens S7-1200. Through our tutorial videos, we show you exactly how to use TIA virtual software to simulate S7-1200 instructions using the TIA virtual PLC software.
S7-1200 & TIA PORTAL main Preview course link
• Siemens S7-1200 & TIA ...
Links to the Full video of each lesson:
Lesson 1
• SIEMENS S7-1200 PLC TI...
Lesson 2
• SIEMENS S7 stop start ...
Lesson 3
• SIEMENS tia portal S7 ...
L 4
• siemens s7 1200 introd...
L 5
• Siemens S7-1200 TIA Po...
L 6
• ladder language progra...
L 7
• bit logic basics - bit...
L 8
• bit logic instructions...
L 9
• Tutorial on S7-1200 TI...
L10
• Tutorial on Siemens S7...
L11
• TIA PORTAL scan operan...
L 12
• BIT LOGIC programming ...
L 13
• configuring factory io...
L14
• Advanced Bit Logic Ope...
L 15
• Transferring a Factory...
L 16
• Tutorial on Siemens S7...
L 17
• on delay off delay tim...
L 18
• timer plc s7 1200 - si...
L 19
• Siemens TIA Portal tut...
L 20
• timer filling tank pro...
L 21
• Siemens S7-1200 TIA Po...
L 22
• counter input output s...
L 23
• compare instruction in...
L 24
• Math, Mathematics func...
L 25
• Math functions, SQR, S...
L 26
• Move instructions, PLC...
L 27
• Practical Move instruc...
L 28
• how to use CONVERT ins...
L 29
• functions jump label -...
L 30
• Siemens TIA portal Wor...
L 31
• Siemens TIA portal : S...
L 32
• How to use analog inpu...
L 33
• plc analog inputs and ...
L 34
• Siemens TIA PORTAL how...
L 35
• Transferring a Factory...
L 36
• siemens s7 hmi simulat...
L37
• recipe and alarms tuto...
L 38
• uploading program from...
L 39
• TIA PORTAL HMI simulat...
L 40
• user view screen liqui...
L 41
• siemens s7 1200 data l...
L 42
• Siemens TIA PORTAL & k...
L 43
• Siemens S7 pid control...
L 44
• recipes and alarms tut...
++++++++++++++ AWESOME courses to purchase
Now you can purchase these courses from www.plcgoods.com
1- Complete programming Siemens S7-1200 PLC & KTP 400 HMI device course
A 12:37 hours course / 44 complete videos
2- Complete Programming Siemens Simatic S7-300 PLC course
An 8:00 hours course / with 23 videos
3-Allen Bradley PLC training - RSLogix 500/5000 series
A 9hr/11min course/with 32 videos
4- Complete DELTA PLC programming course with ISPSOFT & FACTORY IO
A 6:00 hours course / with 24 videos
5-"CODESYS PLC programming tutorial for beginners"
A 6:34 hours course / with 21 videos
6-"Camtasia Mastery training course"
A 2:30 hours course / with 10 videos
7-Affiliate link to purchase Factory IO software
factoryio.com/url-action?ref=...
#plcgoods #plcprogramming #tiaportal

Опубликовано:

5 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@valmontdain 3 года назад

Thanks a lot for these tutorials sir. I keep learning massively from them. Please, am a bit confused on the MOVE instruction sir. Is it like an array? Where does it get its input from(what influences its values) ....how is it connected to the PLC sensors? Am really kinda confused sir, please help me understand as usual Thanks a lot sir

@plcgoodsmentor9223 3 года назад

Hi, thanks for watching our videos. MOVE instruction just moves a value (either a constant number like 20 or a number that is stored on a location of the PLC memory) to another address like (MD0, MW10, QW10). that's simple. please see this video ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zyWGGeElOec.html ) related to the MOVE instruction. But if you want to learn, how an analog signal from a sensor can be read and used by PLC, please see this video ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-l-Y567r16SE.html )

@plcgoods 3 года назад

Thank you for checking out the channel!

@ahsajibmatubber2179 Год назад

Please Set up hardware connection every circuit

@plcgoods Год назад

We do not show setups in every video, please check out a few previous videos.

@MatXrix 6 месяцев назад

Why Encode doesn't work for 2#00000001 ?

@plcgoods 6 месяцев назад

Encode instruction works with this number 2#00000001. its output is zero.

@gulamansari7630 Год назад

Why did u use OR and AND with pushbuttons. You should have used MOVE instructions with 0 and 1 for closing and opening....

@plcgoods Год назад

Hi there, there are many ways to write a program. This video learns the "WORD Logic" Operation. You can write your own program with some "MOVE" instructions.