Sig Sauer Juliet 5 Micro Install on Unity Fast FTC Omni  

lol it just wasn’t on yet. I have one don’t you worry!

By size, I’m guessing you mean height? For my neck length, height, and goofy egg shaped head, the 2.26 from unity is my preferred height. Absolute cowitness and lower third are too low and then the 2.91 from gbrs are super tall and somewhat uncomfortable but I also haven’t used those too much. Now leaps from scalarworks are nice too, I’ve used the 1.93 risers and those are nice, I just prefer the unity for my body type better. Unfortunately, it’s more about your height, neck length, and head shape. But I think most people should be in the 1.57-2.26 range.

I don’t believe so. I’m pretty sure it was just the mount.

Scratch that, I just got a new one. It did come with an adapter for Juliet’s.

That’s a great question!!! I’ll measure it all out and see whether or not it should work. It sounds like it would in theory, my worry would be when you flip it down, does it hit the base of the mount? I’ll check though.

@@DigitalArmory_ you're making a lot of sense, thanks for the wisdom!

Alright, the difference in height between the risers is 0.13 inches. There is a spacer in the Juliet 5 box that is 0.119 inches. The 0.011 inch difference shouldn’t be noticeable at all. It’ll be closer but it’ll fit when it flips down too. It should work but I’m not giving you a guarantee. Worst case scenario, you have to return the mount.

@@DigitalArmory_ sweet, I appreciate the insight.

Other than centering, I haven’t. I’m a big fan. Having it always above instead of flipping off to the side is game changing.

Good to know thanks. Yea I like the flip to center over the flip to side plus I hate that the juliet 3 and 5 micros have that push button mount instead of the flip.to side mount my juliet 4 has

Are you referring to the irons on the unity riser? Or irons in addition to standard optic mounts?

​​@@DigitalArmory_ the irons in the unity riser, underneath the optic. Normally, you can look under your optic to see the sights. However, when using a magnifier like the eotech, the magnifier's windage and elevation turrets will block the rear sight, making it impossible to see the irons, even with the magnifier up. The same goes for the Vortex. With the Romeo magnifier, is there enough clearance to peek through the irons? I ask because the Romeo 3x doesn't appear to have any large turrets that would otherwise get in the way of the irons underneath the optic.

@ALee-if6ld okay cool, just wanting to confirm before I say something stupid. So I have not found any magnifier that allows you to see the irons on the mount while having the magnifier mounted. The only options I’ve found are take it off since it’s got a QD, or flip it up.

​@@DigitalArmory_that's what I mean. Could you see the irons with it flipped up? Due to the turrets of the eotechs, even flipped up, you can't see the irons because the magnifier is upside down and the turret blocks your ability to view the sights underneath the optic. If you can see the irons with a Romeo mounted in any way shape or form, that's a win for me.

@ALee-if6ld well dang, that freakin sucks. Yes, at least with the Juliet 5 (I don’t know about the other ones) I can see the irons with the Juliet flipped up. But, Juliet and eotechs use the two different mounts that unity make, so you would need a new mount (I believe)