Sighting-In & Recalibrating Your Laser Sight 

I bought a pair of Crimson Trace Laser grips for a small pistol I carry,followed the instructions in the maual,1/4 turn as suggested was perfect.Could not be happier with the product or technical advice.

I came here for 3:12 - I bought a Viridian laser grip for my Taurus 856 and it came out of the box pointing too far right. I nearly unscrewed the windage all the way out trying to force it left. You just saved me a lot of heartache, mate! Thanks.

A-1 customer service. You guys rock!

Thank You. Have and XDS45 that I just sighted in at 17 yards.

I recently got CT laser grips for my S&W 13-2, and it's awesome! I never thought I'd have a laser sight on my revolver, and it's dead-on accurate once it's sighted in properly. What an upgrade!

Nice job, I've had two CT that I had to do the calibration reset. Great piece of advice. I'm very happy with my 3 CT lasers. What has always impressed me is they keep zero even after you change batteries (your mileage may vary?).

Love your grips - never a problem and never a change of zero. I couldn't be happier - truly a very happy customer. NOW - if someone at CTC could get rid of this HORRIBLE must that accompanies the into you'd be far better off. It is the most annoying racket I've heard and I watch a LOT of RU-vid vids pertaining to the firearms industry. Thank you for your superior product and thank you for considering my request. I'd hate to see some people turn down your product because of this server annoyance.

Excellent video very helpful, great product too.

Invaluable information. Well done sir

Great video!

Seems like a good product, but hey why the heck did you guys make the adjustment screws TWO different sizes? Seems bizarre to me as of why

Thank you. I found the video helpful. Would a bore sight laser be useful when sighting in at a desired range?

Excelente ayuda, habia perdido la esperanza de recuperar mi mira laser. Gracias

I chose to ZERO my point of convergence (POC) at 12.5 yds (37.5ft). My trigger guard laser sits 1/2 inch under my muzzle. So, my point of impact (POI) will only be 1/2 inch high - decreasing as I approach my POC with the flip (high now = low) being mostly true out to 25 yds. The drop rate at the 25 yd point will be a bit more but close enough. Plus, if I keep my whits about me I can make mental adjustments and aim the dot a fraction higher. Even if not, I don't expect my POI to be less than an inch off of where the dot hits.

Man my red sight on my ct that comes on smith and Wesson mp15 won’t get brighter it just blinks when I hit the button.. green seems to be working.. but of course, only my red is properly sighted.. just bought it like 2 months ago. Kinda sucks.

I sure wish they'd replace the laser I contacted them about... Activation feels like a 20lb trigger pull. I got a half off code for their site to order a replacement. Which is perpetually out of stock.

I started twisting a part on my laser and when i point my laser straight ahead the laser look like its all the way to the right of me wat i do?

So the Smith j frames that come equipped with a Crimson Trace laser are adjusted for 50 feet? A j frame? That seems very impractical. Half that would be useful for 95% of users.

FIRST, FIRST, FIRST, the pistol's iron sights must be sighted in. Check that FIRST. If your fixed sights are off, take it to a gunsmith to correct. Then align your laser to match. If your pistol is off six inches at 30 feet so will your laser be. If you readjust your laser at the range to be on target, it will always be different than your iron sights. I also recommend that your laser not be sighted in at close range because it will be way off for a longer range target especially with a side mounted laser. Pistol lasers are not overly precise but I want to be on target at 25+ yards. For anything closer I will still be darn close.

Great instructional video. I am attempting to recalibrate mine, however my height starts out too low from the start-after it starts to move, it only goes lower. The left and right adjustment works well. Anything I can try next to get the laser point raised?

What size wrench is this? Just picked a gun with these grips but the laser is like 12ft off and I don’t have all the original gear for it

Can anyone tell me the screw size for the screw for the battery retainer for LG 415G? I lost mine and I've emailed Crimson Trace 6 times with no response.

What is proper distance for a.revolver, when sighting in a laser sight?.... Also what is the size of the adjustment screws?... Thanks.

Thanks for the instructions. Do all Crimson Trace Lasers use the same sized adjustment tool, or are they Laser dependent?

How many feet should I use to set it on target? Would, say, 25' be good or should it be farther away?

Wat size Allen wrench to adjust it

I thought if you put your gun in a vice so it doesn’t move at all when you shoot you can adjust the laser where the shot went

What gun does he have

So you do not have to shoot while sighting these crimson pistol grips ?

What size is that horizontal Allen? I can't find my miniature tools.

I would like to purchase the crimson grip laser but I need a little discount. Thank you

How do I turn off the laser on my 40 maf

I have a Glock 29 which crimson trace laser do I need

What happens if you turn the hex key to much will it mess the lazer up if you turn it to much?

Question, is this annoying though if you are just target practicing or using it in the field for daily use. (say its on a 6inch revolver) It's great because you pick it up and it turns on, but is it annoying because every time you pick it up its on and shining around. (wear batteries too)

i have the ct grip for my .22 barretta and i can NOT get the damned teeny tiny frikken allen wrenches to work! they are literally the size of a needle and NOT perfect in shape! i am giving up and shooting low and to the left if need be!

Make it in green

My laser keep turning off and on every time I shoot at the range

bought one of these for my rpg but didn’t fit unsatisfied and returned instantly 😡

What do you do when the elevation screw comes out? I tried everything to get it to zero, but its not working and I can't find any information on what to do when the elevation screw fall out..

Wait what

How to take them off?

I would rather use a boresighter to line up the laser.

Sorry - Yes, Intro music.

1:50

You shouldn't have to re calibrate

To the r6 fans fooking laser sights

Okay what happens when it doesn’t recenter it’s self when u smack it lmao.

This is SO dumb as it assumes the iron sights are zeroed in which frequently is not the case. Wouldn't a video using a laser boresighter and adjusting crimson trace to that make way more sense?

This guy talks like an instructor and NOT like a shooter. How I sighted my LCR was by firing 3 rounds and comparing their impact to where the laser was pointing. So, I put the laser on target, fired three rounds and then compared their impact to center. Simple and I did not need to explain how the space shuttle works

Foking laser sights? 😤