Silhouette Curio 2 First Cuts by EllyMae with Silhouette Secrets

Подписаться 13 тыс.

Просмотров 7 тыс.

50% 1

First cuts with the Silhouette Curio 2 - the good, the bad, and the final results.
Curio 2 Unboxing - • Silhouette Curio 2 Unb...
Silhouette Curio 2 Playlist - • Silhouette Curio 2
All users will need to update the software to v4.5.735+ in order to connect to a Curio 2, Cameo 5, or Portrait 3.
You will NEED to use a usb cable to connect to the Curio 2 when using v4.5.735 - however, future software versions will be able to connect directly to Bluetooth. A usb cord is NOT included in the box - explained in the video.
Silhouette Classes on Teachable - silhouette-sec...
Affiliate links may be present below and as an Amazon Associate I earn from qualifying purchases.
Silhouette Curio 2 available at CrafterCuts - bit.ly/3ZeiDDH
Vellum Paper - amzn.to/452RAME
Silhouette Curio 2 at Silhouette America - bit.ly/3sf161Z
Silhouette Curio 2 Manual - bit.ly/453K9VC
More videos on the ‪@SilhouetteSecrets‬ RU-vid channel here: www.youtube.co...
Want to help support this channel and future tutorials?
Buy us a coffee - ko-fi.com/silh...
Find me online at:
Silhouette Secrets+ Blog - silhouette-sec...
Silhouette Secrets+ FB Page - / silhouettesecretsplus
Silhouette Secrets+ FB Group - / silhouettesecretsplus
Silhouette Secrets+ Instagram - / silhouettesecretsplus
Swift Creek Customs FB Page - / swiftcreekcustoms
#silhouettecurio #silhouettecurio2 #silhouettesecretsplus #silhouettetutorial #silhouetteclasses
Affiliate links may be present and as an Amazon Associate I earn from qualifying purchases. What that means is that I may receive compensation if you purchase through the links I have provided. The price you pay for the product or service is not higher but I may get compensated for sharing.

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@SilhouetteSecrets 10 месяцев назад

Additional Resources: - Silhouette Heat Pen Setup & Foiling for Cameo 5, Curio 2, and Portrait 4 - bit.ly/49mmrHu - Silhouette Curio 2 Classes - bit.ly/40hv6XP - Beginner Acrylic Etching Class with the Power Engraver Tool step-by-step class - details here: bit.ly/3MmzQFx - Silhouette Curio 2 Resources - bit.ly/40ixdKZ

@rebeccaquinn3937 11 месяцев назад

THANK YOU!! I needed to hear the sound for comparison. You are so amazing at answering questions!!

@SilhouetteSecrets 11 месяцев назад

You are welcome!

@overton1963 5 месяцев назад

Thank you. I’m awaiting my curio 2.

@SilhouetteSecrets 5 месяцев назад

You are welcome!

@qpadua1948 11 месяцев назад

Thank you. Can’t wait to see the cuts, embossing, and stamping results

@SilhouetteSecrets 11 месяцев назад

This machine does not stamp, can you explain more of what you mean? It cuts, it will have embossing tools, power engraver, heat pen, and a leather (not real leather) punch tool coming in Fall 2023.

@sandybb36 11 месяцев назад

Interested to see if it cuts glitter cardstock or how it cuts heavier materials, if the ES mat can hold that material

@SilhouetteSecrets 11 месяцев назад

I am not sure I'd recommend that. I'd wait for the debris tray and use a cutting mat inside it. If you get glitter down in the channels on the machine it will cause issues.

@sandybb36 11 месяцев назад

Thank you. So basically the ES mat is for delicate materials and vinyl, sticker paper, etc. I ordered the C2 but cancelled as I want to see more demos (and couldn't hide it from my hubby yet, lol); but definitely order it over S5 as I have a S4 and S1 already. Appreciate your help.

@SilhouetteSecrets 11 месяцев назад

@sandybb36 yes, delicate, smooth materials. But I've also cut cardstock too.

@SilhouetteSecrets 11 месяцев назад

@@sandybb36 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uTe7JTrl7Uw.html

@suew.4918 8 месяцев назад

I am getting ready to sign up for your beginner acrylic class. Your link for the 12x12 cutting mats do not say they are compatible with the Curio 2. Are they? If so, should I get standard, light or heavy tack? I am really enjoying your videos!

@SilhouetteSecrets 8 месяцев назад

Yes. They are compatible with the Curio 2. I use the standard the most and what I would recommend for acrylic etching. The Silhouette website just hasn't been updated. So glad the videos are helped! Thank you!

@laurar8486 7 месяцев назад

Hi EllyMae! Thanks for putting the Curio 2 to the test. I use the first Curio to cut and etch metal clay. Will the Curio 2 work with metal clay? Maybe taping it down would keep it in place? Can you stop mid etch or cut to see if it's what you expected and have it restart in the same position, like with the original Curio? Thanks!

@SilhouetteSecrets 7 месяцев назад

I'm sure you could work with metal clay on a taped down cutting mat with the Curio debris tray. But no, the Curio 2 doesn't pause and reset like the Curio 1 did. I'll have to test that specifically but what I've seen so far, it does not.

@laurar8486 7 месяцев назад

@@SilhouetteSecrets looking forward to hearing what your results are. Thanks!

@MaryStremmel 11 месяцев назад

This electrostatic mat will work for very thin transfer paper like PDB

@SilhouetteSecrets 11 месяцев назад

I don't know what PDB is, but it will work with thin materials that are completely smooth and flat with no texture. It has to have the smooth surface to build up the charge and be held to the ES protective mat.

@christinedarr6754 9 месяцев назад

Is that wall hanging behind you something you made? Can you show it closer up? I’m curious.

@SilhouetteSecrets 9 месяцев назад

Yes, I made it. Here are a couple things where I have it featured - silhouette-secrets.com/2022/12/14/5-tips-to-weeding-success/

@SilhouetteSecrets 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mDpRDwGeg8k.htmlsi=1_X3ZLMU43uui7Ge

@christinedarr6754 9 месяцев назад

@@SilhouetteSecrets thanks for responding. You truly are an inspiration.

@SilhouetteSecrets 9 месяцев назад

@@christinedarr6754 You are welcome!

@JMS-nj6di 11 месяцев назад

will the business edition be able to connect or is it legacy

@SilhouetteSecrets 11 месяцев назад

Silhouette Business Edition is not required. However, you will need to update the software to a version higher than v4.5.735+ or higher in order to connect to any of new Silhouette machines - Curio 2, Cameo 5, or Portrait 4.

@dmblauvelt545 11 месяцев назад

You actually disabled the auto detect the first time you tried to set up as it was already enabled

@SilhouetteSecrets 11 месяцев назад

Yep! I caught that.... clicking too fast. The joys of learning a new machine and the first cuts.

@JMS-nj6di 11 месяцев назад

can you use a mat if you want?

@SilhouetteSecrets 11 месяцев назад

Yes. You can use a cutting mat on top of the ES bed. I showed how you would do that in the Unboxing video here - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CdCZynA1toM.html

@jodys6799 11 месяцев назад

Thank you i watched your first cut first uh ooh

@SilhouetteSecrets 11 месяцев назад

@@jodys6799 you are welcome!

@darlahpotechin1668 11 месяцев назад

Sorry - your gmail is not working. Tried several times and My Swift Creek is still pending but needed to know ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3BtBqjFNQXY.html if this is doable on Curio 2. The metal dust bothered me and I assumed the debris tray is needed? Also, do you have a source for the metal sheets that are 12x12. Thanks! Really tried to do this in private. Sorry.

@SilhouetteSecrets 11 месяцев назад

This is actually not recommended by Silhouette silhouetteamerica.freshdesk.com/support/solutions/articles/35000227669-silhouette-curio-overview The Curio 1 tools were not designed for etching with the Curio 2 in Tool 1 housing. Tool 1 housing was not designed or tested for etching. Tool 2 housing is the only one recommended for etching. The debris tray should always be used when etching, or you risk any debris getting inside the channels of your machine. If that happens, it can affect the function of the machine and lifespan. That is completely and 100% on the user, and if you do this with your machine, you assume the risks 100%. While some users show things being done in the machines, they rarely disclose that it could have risks or not he covered under the machines warranty.

@SilhouetteSecrets 11 месяцев назад

I have not found a source for larger metal plates. Every location may be different in what they can source.

@darlahpotechin1668 11 месяцев назад

@@SilhouetteSecrets it is why I asked. I was curious but also nervous about trying. I will wait or drag the curio 1 out. Thank you. I may be a cowboy at times trying things but for not want to ruin this machine

@darlahpotechin1668 11 месяцев назад

I hate autocorrect lol