Тёмный

Simple Smart LEDs for your Bambu Lab Printer (BLLED Overview) 

Mark Watt Tech
Подписаться 52 тыс.
Просмотров 11 тыс.
50% 1

In todays video we are taking a look at the BLLED controller for Bambu Lab P1 and X1 printers. The BLLED is a small control board that allows you to retrofit LEDs to your printer to enhance the internal lighting and provides you with some colourful notification lighting.
The BLLED houses an ESP chip which you can freely flash with ESPHome, WLLED or whatever your preferred lighting control firmware is. You can then add the device to Home Assistant to further enhance and extend the controllers automation capabilities.
📚 RESOURCES
Check out the Bambu Lab printers
- Bambu Lab Printers: bambulab.com/en-gb
- Bambu Lab P1 Series 3D printer: bambulab.com/en-gb/p1
- Bambu Lab X1 Series 3D printer: bambulab.com/en-gb/x1
- Dutch Developer Git Repo: github.com/DutchDevelop/BLLED...
- Bambu Lab HACS integration : github.com/greghesp/ha-bambulab
- Dutch Developers Site : www.dutchdevelop.com/
- LED raiser used: www.printables.com/model/4102...
- BLLED Case: www.printables.com/model/4399...
📚 PRODUCT USED IN THE VIDEO
- BLLED : www.etsy.com/uk/listing/14521...
- LEDs I used : amzn.to/49eSFDC
- DC Adapter: amzn.to/49nj6r5
- Power Supply: amzn.to/3OsndKe
- ABS (I used in LED Raiser) : amzn.to/48XB1EZ
⌚ TIMESTAMPS
0:00 - Introduction
0:13 - BLLED Controller
1:03 - What's needed for this project
1:55 - BLLED IO
2:35 - Brief overview of the install
3:39 - Flashing with ESPHOME
4:42 - Summary and Outro
🔽 CONNECT WITH ME
- Discord: / discord
- X: x.com/MarkWattTech
- Facebook: / markwatttech
- Facebook Group: / 2963936147172102
- TikTok: / markwatt94
- Instagram: / markwatttech
- Reddit: / markwatttech
- Mastodon: fosstodon.org/@MarkWattTech
🙏 REQUEST VIDEOS
forms.gle/zYpyd8gJBttYN7J17
🔔 SUBSCRIBE ON RU-vid
ru-vid.com?...
🙌 SUPPORT MY CHANNEL
Hit the LIKE button in any video! You can also support me by using any of the links below!
► Become a Patreon Member:
/ markwatttech
► RU-vid Channel Member: / @markwatttech
► PayPal :
www.paypal.com/paypalme/markw...
► BuyMeACoffee:
www.buymeacoffee.com/MarkWatt...
► Ko-Fi:
ko-fi.com/markwatttech
► My Amazon Store:
www.amazon.co.uk/shop/markwat...
🎵 Track Info:
Title : All That
Composer : Benjamin Tissot
Licensed to : MarkWattTech
Available from :
www.bensound.com/royalty-free...
#bambulab​​​​ #upgrade​​​​ #ledcontroller

Наука

Опубликовано:

 

31 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@vincentgolzinger6017
@vincentgolzinger6017 Месяц назад
I would love to see more videos about useful upgrades for the X1!
@DutchDeveloper
@DutchDeveloper 6 месяцев назад
i would love to see a follow up video :)
@iainhay2823
@iainhay2823 6 месяцев назад
Like the look of this👍 watched it tonight at Schiphol which seems appropriate
@vincentgolzinger6017
@vincentgolzinger6017 Месяц назад
+1
@Exstaz
@Exstaz 4 месяца назад
I got the extended one and it works flawlessly. Just such a nice add on.
@NickKarpen
@NickKarpen 5 месяцев назад
Did the same, but with a Dig-Uno, WLED and Home Assistant. Nice to be able to create my own automations around the printer. I also used a new 6 pin ams cable cut in half to power the Dig-Uno.
@adamklosterman8960
@adamklosterman8960 5 месяцев назад
Ive had one of these for a while now. Found it works well about half the time, works so so about 25 percent of the time, doesnt work at all and had to be reprogrammed about 25 percent of the time.
@blm7929
@blm7929 5 месяцев назад
Have it since months and globally happy with it. It works without problem except that after weeks it started to enable blue light all the time... the developer said me to just unplug the blue channel. I also selected to not turn green or red at the end of the print but it does it anyway. Apart from that, it's great.
@thespencerowen
@thespencerowen 5 месяцев назад
Fantastic!
@Interbert
@Interbert 6 месяцев назад
Yes, i would love to see a follow up video
@jimgentry58
@jimgentry58 Месяц назад
Yes, could you please have a tutorial to build this unit into my X1C I would like complete tutorial to install this unit for the extended. I am just getting into 3-D printing and I need to have a white. I’m older and I really need the light so I can see.
@steffenfrkjr1424
@steffenfrkjr1424 6 месяцев назад
More of this type please
@rodneysmith1750
@rodneysmith1750 6 месяцев назад
Great video Mark, keep them coming. Wish that you had a K1 Max though.
@MarkWattTech
@MarkWattTech 5 месяцев назад
I have a K1 Max! Actually looking at creating this same setup but with a zigbee lighting controller 😁
@rodneysmith1750
@rodneysmith1750 5 месяцев назад
@@MarkWattTechCool! I'll be hanging around and trying a few things on my own with Home Assistant and the K1 Max lighting.
@alexdhayden
@alexdhayden 25 дней назад
Can you make it control ws2812 addressable LEDs?
@kielhawkins9529
@kielhawkins9529 5 месяцев назад
What is the benefit of this over an off the shelf zigbee or WiFi led controller hooked up to home assistant for automation?
@Jnibbs24
@Jnibbs24 3 месяца назад
I got this installation wasn’t difficult but when I hook up my LEDs they just flash
@xXB3t4Xx
@xXB3t4Xx 3 месяца назад
Hello, great video as always! I finally received my BL led controller and I'm not really satisfied with the result with the current firmware, so I wanted to install Wled there but I'm blocking it...what is the configuration of Wled to use to run rgbcct leds? Which gpio pin to indicate? I don't currently have any reaction from the led strip 😒
@ljohnso16
@ljohnso16 Месяц назад
why could we not use wled and a standard esp?
@Tafmie
@Tafmie 3 месяца назад
Is it possible to explain more in detail how to add this BBLED as a device in ESPHome in Home Assistant? I don't see it auto-detected.
@OldManJimmy1
@OldManJimmy1 5 месяцев назад
Full setup Vedic please.
@brettryan8737
@brettryan8737 5 месяцев назад
could you use addressable leds to follow the x and y axis of the print head
@leemarsh5258
@leemarsh5258 5 месяцев назад
It doesn't look like the integration reports the x/y axis so unlikely. It does report things like % completed and layer so could maybe automate to change colour based on percentage complete etc.
@edgley
@edgley 13 дней назад
Did you have any issues linking your X1C to Home assistant? the Greghsp work through only gets so far for me and then I can't get it added due to an error at adding the printer credentials
@MarkWattTech
@MarkWattTech 13 дней назад
Heya. What's the error you are getting? Do you have 2FA enabled? If so it won't work due to a current limitation on the Bambu Cloud
@edgley
@edgley 13 дней назад
@@MarkWattTechhaven’t got 2FA I keep getting something along the lines of “invalid credentials” when I get to the stage of inputting my IP and password. Initially it was getting stuck on the input of my Bambu log in but that seems to have rectified itself
@martemchuk
@martemchuk 5 месяцев назад
why not to use normal led and automation?
Далее
Это конец... Ютуб закрывают?
01:09
Connect Bambu Lab 3D Printers to Home Assistant
19:30
Просмотров 2,6 тыс.
Homemade PCBs with Fiber Laser - 0.1mm Clearance
44:57
Просмотров 248 тыс.
5 Months with the AnkerMake M5C (My Experience)
19:01
HOW TO - Replace Google For an ESP32 (Onju Voice)
17:25
The 10 BEST Upgrades for your Bambu Lab 3D Printer!
10:46
RIP Philips Hue & Govee
16:28
Просмотров 694 тыс.
Bambu Lab X1   10 Things Must Prints
11:18
Просмотров 8 тыс.
The best upgrades for your Bambu Lab 3D printer
16:17
Просмотров 388 тыс.
КРУТОЙ ТЕЛЕФОН
0:16
Просмотров 6 млн