Simple Tip: Using Blenderm on RC Model Hinges (the RIGHT way!)

Подписаться 18 тыс.

Просмотров 37 тыс.

50% 1

If you apply the tape when the moving surface is at it's MAXIMUM deflection, at every other angle, there is very little tension! I worked this a while back after putting the tape on while the moving surface was flat, then noticed that the servo was struggling to move the flap.
You can buy this tape on eBay (which tends to be more expensive, but do check) or on HobbyKing here goo.gl/RW4Bfq
I hope it helps you!!
As always thanks for watching & happy flying,
Matt
---
WANT MORE VIDEOS LIKE THIS ONE?
---
Subscribe here for the LATEST updates:
ru-vid.com_c...
For more videos like this one, see my RU-vid Channel here:
/ moggiex
Would you like to SEE THE NEW VIDEO'S BEFORE they're published on RU-vid?
---
I post the videos in the FaceBalls group BEFORE they go live on RU-vid.
You can join the group here:
/ 1441444805872970

Спорт

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@rossfraser7304 6 лет назад

Good work. Another good hint ; always keep your tape in a bag to avoid crap building up on the edge of the roll !

@FromAboveAndBeyondChannel 4 года назад

Thanks alot for this awesome tip. 😊

@frozendene 2 года назад

I purchased some hinge tape once from a hobby shop. The inside of the roll said benderm, went to my local drugstore (pharmacy), asked the price for the tape…..surprise, surprise I can get a box of 12 rolls of the tape for the price of three rolls at the hobby shop….D#$&o repackaged the tape and it costed a small fortune…..since then I wander through the aisles to see what I can use in my rc hobby as there is no local hobby shop.

@1976axerhand 7 лет назад

did you do the bottom side? or just the top thx

@168grhp 7 лет назад

Great tip!

@RagTheNutsOff 7 лет назад

Thanks!

@johnelliott8630 2 года назад

Another tape for hinges is hockey tape and is available at many sporting goods shops. It looks like Blenderm but it's stronger, and it's a LOT cheaper.

@thirtythreeeyes8624 Год назад

Is there a different kind than the fabric stuff you wrap the stick with? Blenderm can be found on Ebay or medical websites cheaper that's where I get it.

@muefive 5 лет назад

Thanks Mate!

@papylecelte9916 Год назад

Is that safe to use this technique for bigger planes like X-UAV Clouds?

@EnglishTurbines 6 лет назад

A cut my flying surfaces off...then hinge them both sides using glass strand tape. Far less friction and a strong durable hinge with less load on the servo.

@heady2008 8 лет назад

The only problem surface for Blenderm tape is EPP foam as it's a rougher texture than other foams used in model making. It will work perfectly well if you prime the surface with a narrow film of clear adhesive such as UHU Por etc

@RagTheNutsOff 8 лет назад

Howdy fella, absolutely! A thin smear of goop glue normally does it EPP model hinges, thats what I normally use instead of blenderm on those ones. Matt

@Paul-pb3vq 6 лет назад

Have you tried Cutting off aileron completely and us pinned hinges ? .

@RagTheNutsOff 6 лет назад

Howdy Paul, I have done that on other models. But I must admit, I end up CA'ing at least one hinge 😁

@Paul-pb3vq 6 лет назад

RagTheNutsOff Yes does happen . But what I do is carefully put a tiny drop of thin oil on pinned part of the hinge , but make sure no oil goes on the flat part were glue goes . I use a cocktail stick and work the hinge before glueing .

@OldMtnGeezer 6 лет назад

My technique for pinned hinges - melt a small dab of Vaseline in a teaspoon, dip just the pin edge into the liquid, work it back & forth as it congeals, & then wipe off any excess. CA proof.

@JoshWeaverRC 6 лет назад

Funny you said it is for medical. I added my old Army medical kit in the box now that I am playing with nitro motors. I saw the old tape in the kit and thought what's the difference.