Simplest Way to Leveled your K1 Max Print Bed

Подписаться 14 тыс.

Просмотров 7 тыс.

50% 1

In this short video I'll show you the quick and easy fix I used to get things level and printing properly again. My K1 Max was great until I started printed across the whole bed, then found out there was some leveling issues that needed to be addressed.
=============================
⚡ Items use in video
=============================
▶️ K1 Max:
➜ Creality Store: = shrsl.com/4iafi
➜ Amazon.ca = amzn.to/3wfDTPl
➜ Amazone.com = amzn.to/4aTnY8u
▶️ Ender 3 V3:
➜ Creality Store: shrsl.com/4ia14
➜ Amazon.ca = amzn.to/3xXoFix
➜ Amazone.com = amzn.to/4aTEzc2
▶️ CA glue:
➜ Amazon.ca = amzn.to/3xS4HWh
➜ Amazone.com = amzn.to/44zTqX7
=============================
If you would like to support my work or get access to the files used in my video, head over to Patreon and take a look 🙏
=============================
▶️ / daverigdesign
=============================
⚡ Visit my amazon store for a list of products I've used in builds
=============================
▶️ amzn.to/3vvFOP2
=============================
📸Camera's gear:
=============================
▶️ DJI Action 3
➜ Amazon.ca = amzn.to/48Uz8Yz
➜ Amazone.com = amzn.to/3x3WePd
▶️ Gopro Hero9 Black:
➜ Amazon.ca = amzn.to/48IDkLP
➜ Amazon.com = amzn.to/48TeqsG
▶️ iPhone Pro Max 15
▶️ Samsung T7 external HHD
➜ Amazon.ca = amzn.to/4awe4ZZ
➜ Amazone.com = amzn.to/43yUAlb
▶️ Phone to HHD USB-C cable
➜ Amazon.ca = amzn.to/3TAmrhb
➜ Amazone.com = amzn.to/3IBqBz5
These are amazon affiliate links. As an Amazon Associate I earn a small commission from qualifying purchases. Using these links helps support this channel. Thank you!
=============================
📽Stock footage and graphics: motionarray.com/refer-to-frie...
=============================
🎵 Music by Epidemic sound: share.epidemicsound.com/kj1acc
=============================

Хобби

Опубликовано:

27 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@mmouse648 2 месяца назад

Nice job! I had a CR-10S with an awful bed that Creality refused to replace under warranty,. I had to BEND it by hand, dead blow hammers, and sacrifice of a goat at midnight with a filament noose to get level, so you should be happy they only warped it a little ... LOL! I finally got it really close, and with an upgrade to a Duet motherboard with leveling got it really dialed in. Also went with silicone spacers as a part of the final solution. My how the industry has changed in the last 9 years, eh?

@Nico-wo1lx 22 дня назад

Very clever solution!! I’m gonna try it

@Zeltroix 3 месяца назад

I used 12mm silicone spacers, work great.

@DaveRigDesign 3 месяца назад

I saw someone else used those with thumb screws to adjust the height. Definitely gives you more adjustability but mine happened to work out with the washers. Should be something you only adjust once.

@pauldawson9277 Месяц назад

this guy over here dehydrated af with that hanging cuticle

@min0rmeme108 Месяц назад

I need help with this

@Camaro45th 2 месяца назад

I have to ask how do you figure out what corner is what on the bed mesh?

@DaveRigDesign 2 месяца назад

Look at the x/y coordinates. 0,0 is the front left corner of the bed. Where the door hinges are.

@philmayhem 2 месяца назад

This was how I originally did mine, but actually made shims from squares of postit note with a hole punched in the centre, but after several attempts (got fairly close), I opted for silicone spacers and wheels underneath the bed so that could make finer adjustments.

@julesdrlt Месяц назад

Hello how to make a bed mesh and on which application, créality print is it possible?

@min0rmeme108 Месяц назад

Yeah I have no idea where to find that hope you get the answer

@DaveRigDesign Месяц назад

@min0rmeme108 the mesh can be seen in the fluid interface. I think you can get to it from the Creality slicer or at lease you can get the up address of your machine and they type that into a web browser and get to it that way. But your machine needs to be hooked up to your home network to access it

@min0rmeme108 Месяц назад

@@DaveRigDesign I had to root the k1 max to be able to see it

@min0rmeme108 Месяц назад

@DaveRigDesign thanks for the reply I'm actively trying to figure this thing out just started 3d printing like 4 days ago started well enough and hit the fan yesterday

@DaveRigDesign Месяц назад

@min0rmeme108 that should be needed. You should be able to see it without rooting

@FeStratagem 3 месяца назад

What kind of glue?

@DaveRigDesign 3 месяца назад

CA glue

@AdrienVercaempst 3 месяца назад

That's why i don't buy any creality but bambu products

@DaveRigDesign 3 месяца назад

Minor issues really. Machine is otherwise great. When the beds get big it’s hard to keep them flat. Maybe some built in adjustment is needed.

@mmouse648 2 месяца назад

Well ... That's a fine sentiment but as someone who's had a Bambu Labs X1C Carbon with AMS since they released them I'll point out that BL had a MAJOR problem with their early releases. Like people talking about Class Action Lawsuits big. On their official forum, a "problem with bed leveling" thread is the THIRD largest discussion EVER with over 65,500 views currently (5/24). That's NOT counting Reddit or Discord posts who have similar numbers! As an owner of Creality and BL products (multiples) I agree that BL makes a killer product but you're overstating things a bit here.😉 Especially with bed level, as BL has blood on their hands form that subject. Just sayin ...! Cheers!

@leickenberg 2 месяца назад

@DaveRigDesign I purchased one and sold it on 2 weeks later. No quality control whatsoever. I fixed the bed level which was way off but still, bad print quality, bad filament feed design, and many failed prints. I would advise against purchasing this printer.

@DaveRigDesign 2 месяца назад

@leickenberg I’ve had some issues but not terrible. Not as plug&play as the ended 3 V3. I’m wondering if the extrusions issues are due to the tight turns in the filament path. I may change it and see if that fixes anything.

@leickenberg 2 месяца назад

@DaveRigDesign the filament path is one of the problems. The other one is the extruder itself, I had the latest version with unicorn nozzle and still the filament would get stuck in the extruder which means disassembly to remove the shredded filament. Had several instances where the printer would just go on and move in thin air as it doesn't detect no flow scenarios. Glad it works for you but I am looking for a more reliable product with less quality issues.