Тёмный

SKODA FABIA Front Wing removal/refit (Mk1 99-07) 

HatBoyHarvey
Подписаться 21 тыс.
Просмотров 65 тыс.
50% 1

In this video I show you how I removed and refit the Front left wing panel on a Skoda Fabia MK1 (99-07) which is similar to other VW/Audi/Seat/Skoda models
Front bumper removal/refit • Skoda Fabia REAR BUMPE...
Inner plastic wheel arch liner • SKODA FABIA front Whee...
front wing bolts and nut M5x16 10mm Torque 8Nm
Bumper wing clips
Right 6Y0807050A
Left 6Y0807049A
RS Right 6Y0807050C
RS Left 6Y0807049C
Sealant: amzn.to/3i2hivy
Please Like this video:👍 • SKODA FABIA Front Wing...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • SKODA FABIA Front Wing...
Follow me on Twitter:👍 / hatboyharvey
Buy Harvey a Coffee: ko-fi.com/hatboyharvey
I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / youtube_audiolibrary / also Audionautix is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0)
Lemon Fight - Stronger (feat. Jessica Reynoso) [NCS Release].mp3
• Lemon Fight - Stronger...

Авто/Мото

Опубликовано:

 

10 июл 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 69   
@tonymacdonald2870
@tonymacdonald2870 3 года назад
Love your videos. what you do is incredible, and always helpful even if not needed right now. many thanks from a MK1 owner.
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Much appreciated, Glad you like them. They will always be there to help anyone, which engine model have you, any issues? :-)
@tonymacdonald2870
@tonymacdonald2870 3 года назад
@@HatBoyHarvey mine is 07 TDI 100 Estate 1893cc. I never had any issues with it, passes mot no problems. next one is 22/11. I watch all your videos. these cars are worth ever penny payed for them.
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Yes I agree, worth every penny; Estate great. Watch out for the sills rusting though as mine has started to do this (03 car) :-)
@filipstrojek6485
@filipstrojek6485 10 месяцев назад
Thanks for making that kind of content mate you have helped me a lot and saved me load of money working on my skoda
@HatBoyHarvey
@HatBoyHarvey 10 месяцев назад
You're very welcome, glad to help :-)
@fotisparolas7732
@fotisparolas7732 3 года назад
Very good video, as always. Appreciate that you didn't "cut" your minor mistake with the soundproofing piece. Keep it up man.
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Thanks, yep it fell out, but not sure which way it goes back in, or with any confidence what it is actually for - I put it back with the curved section facing down - baffling - doesn't seem obvious to me !?
@jancicvarek160
@jancicvarek160 10 месяцев назад
Very good, thank you, Hat Boy. 👍😀
@HatBoyHarvey
@HatBoyHarvey 10 месяцев назад
You're welcome :-)
@ruimvp
@ruimvp 3 года назад
Another superb piece of this form of art.
@ashl3yow3n
@ashl3yow3n 3 года назад
wicked number plate and your videos been so helpful to me
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Absolutely. Glad my videos have helped you :-)
@branejankovic5879
@branejankovic5879 3 года назад
Great video!
@joronyhanma
@joronyhanma 7 месяцев назад
Appreciate your videos a lot will replace mine in the next days. Greetings from Bulgaria 🇧🇬
@HatBoyHarvey
@HatBoyHarvey 7 месяцев назад
Vie ste dobre doshli. Glad to help :-)
@draganbogicevic2934
@draganbogicevic2934 3 года назад
fine job mate
@user-oe2sw6xo7g
@user-oe2sw6xo7g 3 месяца назад
Дякую за інформацію
@HatBoyHarvey
@HatBoyHarvey 3 месяца назад
будь ласка :-)
@sergrey260
@sergrey260 2 года назад
Супер, я готов отдать свою машину в ваши руки, вы лучший.
@HatBoyHarvey
@HatBoyHarvey 2 года назад
Спасибо за ваши добрые слова :-)
@marsiseret7140
@marsiseret7140 2 года назад
Great vid!
@matthardy6328
@matthardy6328 8 месяцев назад
Great video Harvey, but I have to say…… your shoes need replacing more than that wing. 😂😂😂. Good informative videos. Keep em coming.
@HatBoyHarvey
@HatBoyHarvey 8 месяцев назад
YEP, have now replaced those with some recycled ones I have borrowed and repaired from my uncle Bob! :-)
@akidkhaled9161
@akidkhaled9161 3 года назад
Perfekt. Thanks
@pavelozdani439
@pavelozdani439 2 года назад
thanks for the great video - it helped me a lot
@HatBoyHarvey
@HatBoyHarvey 2 года назад
Glad it helped you, thank :-)
@sergeyenigma5841
@sergeyenigma5841 3 года назад
Красавчик!!!
@albertikupper
@albertikupper 3 года назад
YES I NEED THAT THANKS YOU
@HatBoyHarvey
@HatBoyHarvey 3 года назад
No worries ;-)
@adnanabay
@adnanabay 3 года назад
Great job bro.
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Thanks bro :-)
@matthewbaxter277
@matthewbaxter277 3 года назад
Great helpfull vidio as allways 😊👍
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Glad you think so, I've still not done the welding :-)
@alex43111
@alex43111 3 года назад
The dirt gathering there is a common problem in the octavia mk 1 and 2 also.
@pilinhamole69
@pilinhamole69 3 года назад
Someone know the name of the glue used to seal the side wing?
@rabnawazkhan1837
@rabnawazkhan1837 2 года назад
Nice one sir
@HatBoyHarvey
@HatBoyHarvey 2 года назад
You're very welcome :-)
@sibinspasojevic3102
@sibinspasojevic3102 3 года назад
One more great video sir! I have a question if you find the time: I have a Skoda Fabia like yours 1.4 16 valve 100 bhp 2004. During driving when I press the gas pedal the asr,epc and check engine light go on at the same time. Also a few days ago oil started mildly leaking from the crankcase breather. Have you encountered such a problem? Thanks in any case.
@HatBoyHarvey
@HatBoyHarvey 3 года назад
You're very welcome. Mine is the 1.9 8 valve pumpe duse diesel, but I believe yours has high engine balance pressures due to only having 3 cyclinders so cleaning the crank case breather system and fix any 'leaking' pipes/connections to work correctly should help here. there are a number of pipes none return valves and an oil separator half way down the engine block, probably on the back of your engine which get blocked. fairly important on 3 cyclinder engines. I would do this first and see if the lights go out.
@sibinspasojevic3102
@sibinspasojevic3102 3 года назад
@@HatBoyHarvey the engine is a four cylinder like the one that went in to the Golf mark 4 if i'm not mistaken. I will check that. Is there i filter inside the casing? That's my last question😀
@user-is3jv7dw3z
@user-is3jv7dw3z 6 месяцев назад
The t shape piece of foam which fell out how does it fit back in and which way up does it go? My dad is trying to work it out but is stumped so any help would be appreciated thanks
@HatBoyHarvey
@HatBoyHarvey 6 месяцев назад
I don't know either, it just fell out. I believe that the base of the T is meant to rest on the plastic liner and holding it in place stopping it flapping and deadening any vibrations. That's how I put it back. If you slow the video down you can see how it dropped out. Hope this helps and thanks for asking :-)
@paulandrews3785
@paulandrews3785 3 года назад
Good video my man Just painted a new wing on vrs will fit to day some point think the fome is a sound deadening took both out worked on lots of mk4 golfs and thay rust In this area but the Fabia s seem to be ok Just got rid anyways Keep up the great work 😉job dun rite as always
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Thanks, mine's rusting at the bottom a bit and the sill needs welding, but haven't got round to it yet. Did you have your wing sprayed or did you do it yourself and if so what did you use?
@paulandrews3785
@paulandrews3785 3 года назад
@@HatBoyHarvey Did it my self 2k base coat and lacquer magic black bumper needs TLC to lol..😉mite have to weld same bit on mine to haven't took it off yet?!!! love your vids have helped me out good knowledge on the fabia s cheers
@lukelukas42
@lukelukas42 3 года назад
hi, i like your videos really nice really informative. would you consider making video about skoda fabia windscreen washer jet, because of they are fixed plastic panel, once panel removed then they lost aliment setting to windscreen ,therefore it is almost impossible get right spray pattern on windscreen again. Thanks
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Thanks, glad you like them, the jet washers don't adjust as far as my experience goes. Mine were great when new for the first five or so years, then they began spraying badly and like you I couldn't adjust them well enough to get the great spray pattern back. I replaced mine with cheaper none oem ones which were naff. Never got round to buying two new oem ones which is the way to go in my opinion or change them for some other adjustable make/model from another car that can be made to fit, When i find some good ones I'll do a video, thanks :-)
@24579william
@24579william 3 года назад
i replaced my jet washers, just go to skoda or your local TPS. cheap and easy.
@pavelvalenta9207
@pavelvalenta9207 2 года назад
👍👍👍👍
@RandomClips27.
@RandomClips27. Год назад
Is this the same for the FABIA AMBIENTE 16V 100 MK 1 Thanks
@HatBoyHarvey
@HatBoyHarvey Год назад
Same wing, slightly different bumper
@RandomClips27.
@RandomClips27. Год назад
@@HatBoyHarvey ok thanks 👍👍
@ju94160
@ju94160 Месяц назад
❤️
@HatBoyHarvey
@HatBoyHarvey Месяц назад
My pleasure :-)
@jordanthomas6890
@jordanthomas6890 3 года назад
What are the wheel arch lineing screws call
@HatBoyHarvey
@HatBoyHarvey 3 года назад
vw large flage torx screws
@user-qi7lh8ne1c
@user-qi7lh8ne1c Месяц назад
Я каждую весну снимаю подкрылки и вымываю кузов от грязи, соли и тд.
@HatBoyHarvey
@HatBoyHarvey Месяц назад
спасибо, это такая замечательная идея. Мне бы хотелось подумать об этом до того, как ты сказал, что сделал это. это должно стать весенним распорядком дня во многих странах с северным климатом Европы и Америки :-))
@TheConsettcowboy
@TheConsettcowboy 11 месяцев назад
The piece of foam that fell out of the wing is sound deadening. I wouldn't put it back on the car because thats how the panels rot away.
@knowyourenemy66
@knowyourenemy66 9 месяцев назад
Very helpful but removing the bumper and wheel is not needed. I removed the fender in 43 minutes with simple tools and no experience. No bumper removal or lifting the car. Also, how do people work with these protective gloves?🙄
@ayoubzay4192
@ayoubzay4192 3 года назад
i have a skoda fabia but motor is golf 3
@paxvobiscum8859
@paxvobiscum8859 3 года назад
👋👍🙋🇵🇱💪🌞🌞🌞
@vmarh66
@vmarh66 3 года назад
Так и не понял зачем он крыло снимал?
@HatBoyHarvey
@HatBoyHarvey 3 года назад
inspect the rust on the wing/sill bottom, which needs welding now :-)
@sergrey260
@sergrey260 2 года назад
Жаль что нас разделяет расстояние, учитель
@MrocznyTechnik
@MrocznyTechnik 3 года назад
Dear Fellow Skoda Fabia Mk1 users. I must worn you. This what I fund on my MK1 2005 Combi: ibb.co/cLb6xbM ibb.co/6WGt6S9 ibb.co/3kv6X1L This crap was hidden under what looked like factory sealant, thick rubberish layer in body color.I managed to peel this hole with bare fingers. Holes are on both sides, they are located at jack-stand support points. Sils are in PERFECT condition, no visible rust anywhere...and such crappy surprise. I will talk with some specialists tomorrow, but I'm worried, this is structural damage and time to say goodbye is soon. Maybe I had bad luck, and there was some factory error with corrosion protecting, maybe jack stand damaged sill-rant avd rust done it's nasty job over time. It's sad to keep a car in perfect mechanical condition and find something like this during routine tyres change :(
@HatBoyHarvey
@HatBoyHarvey 3 года назад
Thanks, that looks horrible, I feel you pain, the holes look like they go deep and are going to be hard to fix. Hope mine isn't the same when I get around to a closer inspection :(
@MrocznyTechnik
@MrocznyTechnik 3 года назад
@@HatBoyHarvey Check it ASAP. Maybe is not to late in your case. It's shame to scrap the car, that you cared about so much.. I'll consult local skoda expert (who rebuilds Skoda 105 just for fun). According to bodywork manual, structural rails are away from this damaged place, so there is a hope. Take care!
Далее
Капризы Шкоды за 180 тыс. руб.
21:51
Skoda FABIA Restoration & vRS Conversion // Modified
16:48
SKODA FABIA Lock Carrier / Front End Panel (Mk1 99-07)
18:45
Oprava prahu Fabia 2
13:04
Просмотров 82 тыс.
Sárvédő csere (Skoda Fabia)
35:07
Просмотров 19 тыс.
SKODA FABIA Power Steering Fault and fix Mk1 99-07
9:07
Секретная кнопка в приоре
0:43
Просмотров 370 тыс.
REBUILDING OF BALL BEARING
1:00
Просмотров 3,6 млн