Skunk2 Pro Series Intake Manifold and Alpha 70mm TB for D15 / D16 Install Review And Before - After 

I miss my EJ d16z6, skunk2 Mani, DC 421, aem v2. The skunk 2 manifold was the best mod I liked. Even though I drive a turbo 98 eclipse beauty now. I will always have a place in my heart for my d16

Makes me nostalgic of my d16 with skunk2 manifold loved that deep sound when putting the throttle down 🔥

Pretty cool! Ill subscribe to see more of the build. You should make a video about tuning with crome. Setting afrs, adjusting ignition timing, etc. would love to see that

i had the exact same problems installing my skunk2 intake on my y8 head. solved the exact same way lol

Thanks bro helped me a lot before thinking about buying it

I had the same coolant hose clearance issue on mine. It's a good manifold but I was really suprised they would've designed it that way. I also had to make a bracket to limit how far the TB opens. My TPS range was .4v to 4.9v. It's like the TB was opening more than 100%

Great content bro. For that nut issue you can replace the stud and nut with a Allen bolt.

I enjoy watching your channel bro! Learned a lot 🙏

Lol i was just waiting to here the idle go to the moon with both those inlets open 😂

I was so happy to find this channel with the identical build as mine same color same everything damn

D16's only build power with boost.... Vitara bottom end with 16#'s boost matched with a BrianCrower Stage 2 cam =430whp on E85 cost me just under 2grand total build. Nice civic though very clean build.

I had issues with the runners being so long that we had to move the brake line junction down to make room for the IACV - which ended up very close to the firewall. Never did dyno test - but car seemed to cruise at high speeds (85-95) with less throttle (and hence actually better mileage) at these speeds.

Sick ordering on amazon now but I had to watch a video to see if it first

I would look into delta cam..the 260 would be great for all motor and low boost..and easy to dial in with your experience level and I have first hand experience with delta over 5 years..and P29’s oh my lord..those r my go to eBay pistons...for all motor & boost 😎👍🤜..the only experience With cams I have is delta and bisimoto and pistons nippon racing and arias...but if u lookin into the delta 272....u do lose alil bottom end power that u can fill but pulls hella hard tell red line....but to each there own..good video..oh yea ur tuning info is getting better..feed the world brother

If I wasn't in the UK I'd buy that oem intake manifold they are like gold dust in the UK

Very helpful 🙏🏻

I had the same problem , the reasons because the car runining rich = more power and the ECU tells the computer to injector more gas in the cylinder. But I wonder if it burn cleaner instead of unburn gases. I might be wrong

Don’t want to accidentally drop something down one of the injector Holes I usually plug all openings into engine with tissue paper

How did you get rid of the air injection on top of the thermostat housing did you plug em ?

nice skunk2 pro intake manifold technology civic ok

just got my first vtec A few days ago. Already had header, exhaust, and cold air . Now im going to put this throttle body and manifold on and then an upgraded cam and springs. should net me 200hp. I hope. Gonna take a while. :)

I just ordered a skunk intake for my d15 blocj with d16 head ... Can't wait ti try

great vid, I am thinking of getting a few bolt ons, and that intake is the most expensive, just trying to justify it, but I can't find anyone else that makes an intake manifold for the F22b engine ... new sub, I am gonna check out some more stuff!

Having magnetic trays help a lot stay organized

closest you can get to itbs without going itb... that is pretty much what that design is, i ran it on a b16 with hondata s300 tuned and it definitely helped make power

Hey you have those hose clamp pliers? Hey can you install this for me

What did u do with the pcv valve line? Should I plug it up from under the intake manifold?

Content is always amussing to watch . was going to say you should do a ostrich 2.0 install on ecu vid

I just installed mine today

So I can do the same thing with my y8 then? Even tho I have a z6 mani/throttle body/injectors/rail/ & regulator on my y8? In other words I can swap all that to the skunk2 to mani without no problem?

New to the honda game so probably a noob question i got a skunk 2 intake manifold for a d16z6 but i have a 94 ej1 with a d16y8 the manifold has a small crack was wondering if this would fit my motor and would i need anything extra?

bro digging the channel more vids please got a 96 ek doing a build pretty soon on it thinking about making vids cause your channel

What throttle cable bracket are you using? I cant use the one that came off my original manifold because its way too tall

When's the turbo going on lol. Love the Honda content. Hopefully my car is registered and insured this weekend and can take it on its first drive In like 7 years

hi .. I would like to know how you did it so that you would not be accelerated because I installed the manifuld in my sling D16y8 .. I would like to know that I have to remove ..Can somebody help

Hi Bro, I am planning to use a YCP P29 Piston on a 95 octane fuel rating, will it run nicely? Or do I need to fill my tank with a higher octane rating? Thanks!

Hey man what’s the part number for the intake manifold you bought ?? I bought one for my z6 and trying to buy a aem fuel rail for it but I read online that the z6 and y8 fuel rail have different mounting points

what did you do with the hose that goes into the manifold just above the injectors?

Looking good

Just got another sub =)

I can put this on stock d16y8 just bolt on and that’s it no tune or nothing ?

Great video

I was thinking before you even started it, I hope he plugged those 2 vacuum ports, but nope

Bro a couple of questions; do u have to Chip or change te computer? an the injectors? hope u can answer !

Any suggestions for myD17A2vtec not sure if there is anything .like to get a cam that give me more mid range and a better clutch I have very little power in first and second . can't even get it to 5500rpm until 4th gear slow for VTEC.im wondering if I have trans problem or flywheel.

How were u able to put on the tps sensor onto the other manifold

What kind of valve cover you got tryna get the same one love the carbon fiber

Why didn't you install the 2 hoses that you left on the windshield? because in the old Manifold has one in the middle.

Will this IM give any gains without a tunable ecu

That's what she said!!!

It says that for ek civics there is fuel filter and brake booster issues did you experience these ?

Does that intake pass smog check?

Yeah your right about eg I gotta hit my back wall to make my fit otherwise when i shift it hit the back and make noise.

how many horses does that multiple give???

Yeah this gonna run lovely on my rsx with everything I’ve put in it … Are those official Enkei rims ? I just got the exact same on mines

If you had aftermarket silicone hoses it would fit. They aren't as thick.

What size is this Coupler and where did you buy it from?

I want "Mo Powa!!" 🐹

I installed mine and my car bogs out once I give it gas and it smells super Rich of fuel any thoughts what it could be I tried adjusting the throttle but smells even more like fuel

I got a 98 civic hatch dx and is got a stock engine can i install this intake manifold to it plus i will need the skun2 throttle body to will i need the 70mm? And my is automatic not 5speed?

Hello from Greece Friend!! Nice video!! I thinking buy the exactly the same for my car D16W7 motor. Its run with normal ECU?

Where did you connect the evap seloid on intake?

Hi, i am curious to ask you a favor, i have a fresh built y7/z6 dimpled ported intake port/ ported polished exhaust ports , overbore, eagle rods, acl bearings, vitara pistons, t3 t4 turbo setup. skunk 66mm tb tb, rdx injectors, walbro 255, port matched everything , my issue is the low compression, im on hondata s300, i need a map that will get me running well enough to tune it from there, i am new at tuning and have it down for the most part but i am not experienced to know the changes that vitaras require to idle and run low load..any help. Share your base map with me as i can study it and reference timing fuel etc.. Thanks for the consideration and i love the turbo honda build vids i learned from them.

Will this work with the d15b8 manual.

Is there a way this could work on an automatic?

Can I install this on a stock d16y8 ,

What kind of fuel rail did you use ??

Bro..I owned h.civic ek so4 MT..1.6..N.VTEC..I I'm confused where to put the iacv on skunk2 TB?..Because mine the original iacv install below the TB.Need assistant Sir..tqvm

thanks

Sick

Nice car

Nice video friend! You know if this fit on d16w motor?

Does anyone know if this actually makes power ? Because I've heard people say stock y8 manifold is already good . But I'm trying to swap the mani for more HP . Any suggestions?

Song name when you started changing intake?

Drop ur vtec engagement to 4400 rpm and rev it to 8k it can handle i promise Itll always be in vtec when shifting Reved my D16y8 8k for years

is it compatible with original d15z6?

Why didn't you put the hose on 1st then bolt it up ?

Been doing research into installing one of these manifolds and checking for specs because the fuel rail I have doesn't bolt up the same way as the factory style, came across an eBay listing with screen shots of your video from installing the manifold. Just a heads up if no one asked to use your content, someone has used it elsewhere.

Hey what are those alloys?

And you never talk about the vitara build!!! What was it rod knock?

What is those hose called that connects from the intake manifold to the bottom of by the engine over the oil filter ? Please bro 😅😅😅

What headers you habe on?

We’re you on stock ecu when you did this ? Did it mess with your idle at all ?

i think its designed for aftermarket silicone coolant hose

Nice vedio bro! Is it worth buying? What's ur opinion?

Where you get the iacv

Would this work for a d17a1

All.long don't matter what matters is the port amd polish job that neither intake had start over

Don’t u need to retune the car with hondata ?

I had to do the same with the wrench

Is the fire wall clearance much different with the new manifold? Is the skunk 2 longer? The web sight doesnt show dimensions

What ecu is this s300 p28?

Hey bro I just copped the same manifold but is there a difference in the manifold compared to the silver one(that was also available on Amazon)

What is the background music

wheel specs?

What Intake manifold gasket did you guys run?

A friend's question What year is the car and is it an ex version? Esque I have a Honda Civic ex 96 coupe but I do not know if that admission serves Thank you in advance for any information you can give me

Did you have to put any new seal or a gasket when you do it ??

I swear this is the only Intake Manifold anyone buys.

First thing I would have done is gut that rats nest in the engine. Only thing I hate about those yrs lines everywhere, but thats where wire skils kick in our wiring purchase.